similar to: Voicemail: upgraded?

I Purchased 4 licences for my SCSI only machine. I do have a CDROM - with a mounted CD. The Registration binary gives me a 'Segmentation Fault'. Is this like telling me I can't register the licence? Unfortunately - I only seriously scanned the mailing list after buying the keys.... Seems like the licence insists on using an IDE drive to create some sort of unique serial number.. Has

If I want to send outgoing DTMF over a BRI interface, can I do it with 'isdn4linux' or must I use the 'capi' library? -- . . ___. .__ Posix Systems - Sth Africa /| /| / /__ mje@posix.co.za - Mark J Elkins, Cisco CCIE / |/ |ARK \_/ /__ LKINS Tel: +27 12 807 0590 Cell: +27 82 601 0496 -------------- next part -------------- A non-text attachment was

What I've got... Software: Linux: Slackware 9.1 Asterisk: out of CVS - so its new. isdn4k-utils: to test the ISDN Card Hardware: PII Pentium 400Mhz (Its a test of concept machine) with 320Kb RAM 1 x ISDN BRI Card - DIVA EICON (Installed + working) 2 x Grandstream (Barbie?) BT100 SIP Phones. What Works.. I can call from one phone to the other... get read voicemail... I can

I'm using a SNOM 360 with Ver 4.3 software. Asterisk is.... Asterisk CVS-D2005.05.02.22.00.00-05/04/05 (BRI Stuff + Head) I've used the wiki info to set up some lines to monitor some internal extensions. When the extension is rung - the lamp comes on, when the call is answered, the lamp goes off.. I was expecting something a little more exciting - like the lamp to flash when the

I have a 'day' and a 'night' mode. In the day mode, I play a 'background' message which is interruptable by the pushing of a DTMF key - ie - all is normal. In night mode - I decided to get smarter... I play two backgrounds with a 'sayunixtime' in between and now DTMF does nothing - the menu times out to my 'lets get the operator then'... If I change the

I have a Grandstream GSX-2000 with .. Software Version: Program-- 1.0.0.3 Bootloader-- 1.0.0.3 I tried to do an HTTP update from the Grand Stream web site... After half an hour, I recycled power and now its dead... LED's come on and stay on, screen and buttons are dead. Connectivity to Grandstream.com was always good - whenever I checked (I downloaded the "User Manual" in a

I've got asterisk able to make and receive calls via the Internet via E164 lookups. If I get such a call - I'd like to display the original phone number on my phone. In the log is the following - which displayed '601' on my phone. The caller was +886288097680 - am I getting the wrong ClID because of my end or the caller end?

I want to authenticate a user before he is able to use the phone. I also want to set his privilege as to where he is allowed to call to... Preferably, the password should be their VoiceMail password, (every extension (or is that user?) can have voicemail defined - even if its not in use?) ...one should be able to enter the password (variable length) as part of the dial sequence - eg the number

I've some code to manipulate incoming Caller-ID - so its suitable for replying to... [sipdef] exten => s,1,NoOp(FWD SIP: "${CALLERIDNAME}" <${CALLERIDNUM}>) ; Alter incoming calles from pulver - add a '87' exten => s,2,Gotoif($[${CALLERIDNAME} = ${CALLERIDNUM}]?3:4) exten => s,3,SetCIDName(87${CALLERIDNUM}) exten => s,4,SetCIDNum(87${CALLERIDNUM}) exten

Playing with time ranges - using the examples found in one of the asterisk cook books... (pdf - page 17) ; After Hours include => night_menu|00:00-08:00|Tue-Fri|*|* include => night_menu|17:00-24:00|Mon-Thu|*|* this gives... ... pbx.c:2962 get_timerange: 24:00 isn't a valid end time.... -- Including context 'night_menu|17:00-24:00|Mon-Thu|*|*' in context 'default'

-- Executing DateTime("SIP/phone1-07ff", "") in new stack -- Playing '/var/lib/asterisk/sounds/digits/day-1' (language 'en') -- Playing '/var/lib/asterisk/sounds/digits/mon-3' (language 'en') -- Playing '/var/lib/asterisk/sounds/digits/h-19' (language 'en') This works - the pathname is complete - Joy.

I'm using Asterisk 1.0.2-BRIstuffed-0.2.0-RC2b - when anyone picks up a call with '*8' - the call will drop after about 20 or so seconds. Is this a general problem with Asterisk 1.0.2? As this is the latest release that it appears Klaus-Peter Junghanns has for public consumption - is there anything I can patch for just this problem - or has Klaus-Peter Junghanns (or anyone else) been

I have a AEX800 PCI Express card - sort of a TDM800 with PCI-Express. (or AEX844 - 4FXS & 4FXO) I downloaded Asterisk Now - and have got this loaded on a new motherboard (Intel with 3 PCI, 3 PCI Express - etc). (Downside on PCI-Express is the physical support the express slot gives (very little) compared with an 'old' standard PCI slot!!!) With only this card in the box....

I have * with i4l installed and working - on a dumb eicon card. It seems in order to get DTMF out of the BRI (for business banking - etc) - I should change from i4l drivers to capi drivers. wiki help seems to be for the Fritz card only...??? I have ticked the suggested boxes in 'menuconfig', explored the capi4linux websites - etc... but am missing some magic. I've "modprobe

Whilst on a call, I'm getting the following... -- Started music on hold, class 'default', on SIP/phone3-a7d5 -- Playing 'pbx-transfer' (language 'en') -- Unable to find extension '#' in context 'default' -- Playing 'pbx-invalid' (language 'en') ie - without anyone pushing keys - I hear the music on Hold - as does the

I've got two patterns I want to match on making an outgoing call... (one day - to do Least Cost Routing for Cell/Mobile calls) Firstly - I prefer '0' rather than '9' to get an outside line... Either its a call to a mobile No... (072 -or- 082 -or- 083 -or- 084) or its just another number to dial... I added the following... the playback just advises me which 'route' is

Following a(n apparently) failed attempt to upgrade a BT102, the phone is now brain-dead. Although it still has enough smarts to get a dhcp address and try to download the firmware and config, it never gets past the blue screen, nor will it respond to pings or port 80. Short of sending it back to Grandstream, is there any way to recover the phone? TIA Bruce Komito High Sierra Networks, Inc.

I think what is missing with asterisk is what I'd call a 'working' demo. Its real cool getting the 'Welcome to asterisk' demo running... I think that there should be a 'make basic-plan' that would generate some well commented '.conf' files that set up a basic working systems with.. Two phones for Support Two phones for Sales Two phones for Accounting Voice

I have some Grandstream BT101 SIP phones. Work great (so far). I have some "Planet VIP-101T" H323 phones... how do I make them look/feel/act like a SIP phone ???? I can dial to them from both Trunk + SIP's (ie - I've added 'oh323' libraries) What config do I add so that if I dial the * IP - they then at least act as an extension? Ideally I'd like to just pick up

After much reading and fiddling - I have the gnugk GateKeeper running and can make calls from the H323 phone to the sip phone. Voice works bi-directionally.. Calling from SIP to H323 gives me a problem... Both gnuGK and Asterisk are on the same box. Someone said this was OK. Others said No. I added a second IP (eth0:1) and told gnuGK that was HOME. How do I lock asterisk to the other (eth0) IP -