similar to: - Re: Routing by called interface - Email found in subject

I believe it is not fiber, but I am not sure. I am going to take one of them home tonight and hook it to my POTS line there, which for sure is not fiber. Gregory P. Scasny Golden Technologies Inc. http://www.golden-tech.com 219-462-7200 -----Original Message----- From: asterisk-users-admin@lists.digium.com [mailto:asterisk-users-admin@lists.digium.com] On Behalf Of Michael Welter Sent:

I am surprised you needed to turn the rxgain down so much, usually it is just the opposite. I experienced the same problem you did when my txgain was too low. Gregory P. Scasny Golden Technologies Inc. http://www.golden-tech.com 219-462-7200 -----Original Message----- From: asterisk-users-admin@lists.digium.com [mailto:asterisk-users-admin@lists.digium.com] On Behalf Of bam Sent: Friday, May

Check the Redirection on the web interface of your Snom 200. If it says "When Busy" that's your problem. It should say "Never". Also make sure on Sip->Lines your line appearance says "All" or else you will have the same problem. Hope this helps :) Greg Gregory P. Scasny Golden Technologies Inc. http://www.golden-tech.com 219-462-7200 -----Original

Run /usr/src/zaptel/ztmonitor 32 -v And adjust your gains in /etc/asterisk/zapata.conf accordingly. Gregory P. Scasny Golden Technologies Inc. http://www.golden-tech.com 219-462-7200 -----Original Message----- From: asterisk-users-admin@lists.digium.com [mailto:asterisk-users-admin@lists.digium.com] On Behalf Of bam Sent: Friday, May 07, 2004 3:35 AM To: asterisk-users@lists.digium.com

Jay, I have had a lot of trouble with the FXO ports on Adtran TA750. Unless the incoming POTS lines have a balance impedance, they will buzz very bad. Gregory P. Scasny Golden Technologies Inc. http://www.golden-tech.com 219-462-7200 -----Original Message----- From: asterisk-users-admin@lists.digium.com [mailto:asterisk-users-admin@lists.digium.com] On Behalf Of Jay Milk Sent: Sunday, April

Does anybody have useful tips on creating good quality recordings for use with prompts in asterisk? I'm interested in hearing input on hardware (mics, dats, sound cards, etc) and software (recording software, dsp) as well as recording techniques. Jerimiah Tularosa Communications

Rich, Thanks a bunch, totally understand now and that actually makes total sense. (no need for schematics). This also explains why I used an TA750 to go into a Nortel MICS system, using FXO and no buzz. Totally balanced load from the analog ports on the Nortel across the 5 feet of CAT5 to the FXO on the adtran. Now I need to get rid of some Adtrans --- Anyone lookin to buy? :) Thanks

Set busydetect=no in your zapata.conf file. That should stop the random hang-ups. If you really need busy detection, try setting busycount=8 or even 10. If you still get random hang-ups, turn off busy detection and turn on call progress. May help the situation. Gregory P. Scasny Golden Technologies Inc. http://www.golden-tech.com 219-462-7200 -----Original Message----- From:

All, I need help. I have an (actually 2) Adtran TA750's with 8 FXO ports. I get a terrible buzz on every FXO port. If I unplug the Adtran and put an analog phone on each incoming line, I have no buzz. I also have 2 Carrier Access Access Bank I's with 12 FXO ports. When I plug the same analog lines into either one of those, no noise or buzz whatsoever. I went so far as to move the TA750

Has anybody tried running Asterisk on a SPARC based system? I'd imagine drivers would be the major issue. Any info is appreciated. Jerimiah Tularosa Communications

All, Experiencing some issues on my FXO lines. If a call comes in on an FXO and then get transferred to another FXO (say to call someones cell phone), those two lines will stay tied together indefinitely. This happens to us when we transfer an incoming call to our on call guys after hours and on weekends. We have installed 3 other * boxes and they do the same thing. We use a Adit Channel bank

----- Original Message ----- > Message: 3 > Date: Thu, 16 Sep 2004 07:57:15 -0400 (EDT) > From: David Troy <dave@popvox.com> > Subject: Re: [Asterisk-Users] No Caller Name sent from Asterisk over > National or DMS100 PRI to a Norstar MICS? > snip> > > I have a PRI link up and running between Asterisk and a Nortel Norstar MICS > > v4.1 . I'm having a

I am perplexed by this so I how someone can help me out. On one of my servers the users began complaining that if they picked up a parked call they could not use the # key to transfer the call. This is a particualarly annoying issue since everyone has been taught to use #700 to park calls. At first I thought it was a DTMF issue with the polycom phones, since rebooting seemed to fix the problem.

Hey everyone, I want to run different lines directly to different extensions on two FXO analog interfaces. ie; Zap/1 goes to Ext. 101, Zap/2 goes to extensions 102 Does anyone know of a way to do this? Thanks! Chris

> -----Original Message----- > From: asterisk-users-bounces@lists.digium.com > [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of > Gordon Henderson > Sent: Friday, February 09, 2007 9:47 AM > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: [asterisk-users] Conferencing Phones ... > > > Anyone got any experiences of good quality

Hi, I have a legacy Norstar system that I'm looking into integrating with my Asterisk setup. My first attempts have worked, which involves a Wildcard X100P FXO card in the * box connected to the Internal ATA (FXS port) on the Norstar system. Calling from SIP -> Norstar works fine, since the SIP caller initiated the call and generally will be sane enough to hangup the phone when

I've noticed a problem with calls to Hangup when talking to my Norstars over channelised T-1 E&M trunk lines - it's been present since I started to fiddle with Asterisk last December and it's still present in 'Asterisk CVS-HEAD-08/13/04-10:37:13'. Specifically, when a call is connected to Asterisk from the Norstar DTI card to my T100p I get the following conditions

Hi there! We have an old legacy norstar phone system m8x24-ds ( dr5 ) and a couple of m0x16. It has 5 external analog lines. It has no auto attendant, and no voicemail. So every incoming call is forwarded to a operator, she pick up the phone, talks to the caller and transfer the call to the right extension. We are in Argentina, so buying a star talk is out of the question, there is no selling of

> -----Original Message----- > From: asterisk-users-bounces@lists.digium.com > [mailto:asterisk-users-bounces@lists.digium.com]On Behalf Of Gary Reuter > Sent: Thursday, August 11, 2005 12:59 PM > To: asterisk-users@lists.digium.com > Subject: Re: [Asterisk-Users] PRI dropped calls w/ asterisk dropped > betweenpstn & norstar > > > I poured over my logs most of

Unfortunatly no on both counts. The arrangement right now has: PSTN Trunks & Stations <-> Nortel Norstar#1 <-CT1-> Asterisk#1 <-IAX2-> Asterisk#2 <-CT1-> Nortel Nortstar#2 <-> Stations The Asterisk boxes provide Voicemail to their sites Norstars and intersite calls over IAX. Local Voicemail works flawlessly at each site but there have been reports of PSTN calls