similar to: quadBRI & ISDN telephone

I am just an Asterisk newbie doing a test install. I am using 2 X-Lite clients and have configured them according to the wiki on voip-info. A warning is still displayed on the Asterisk server console saying that I should disable RFC3389 on the client, even after I changed the Transmit Silence to yes. I am able to connect and call the other client, but when I do no audio is being transmitted by

Hi, I have just upgraded my Cisco 7960 phone to SIP firmware today and I have to say it's working great with Asterisk. At work (which uses Cisco Call Manager), when a voicemail is recieved the read light remains lit until the voicemail is retrieved. Is there any way to achieve the same effect with Asterisk ? Thanks, Paul. -------------- next part -------------- An HTML attachment was

I've got an old HFC-S card to play with, and I would like to use it in NT mode. I've a problem only: wiring. I can't fully understand the instructions I was able to find online. Someone can point me to a site which explains the whole procedure clearly (like with some schematics, even in ASCII)? TIA, Simone.

Hi, I am looking for inexpensive isdn card that supports nt mode with asterisk. Does it mean that if mISDN has nt mode support for a specific card that asterisk has too? If yes, I presume I could buy any of the cards listed on the PBX4Linux page: http://isdn.jolly.de/cards.html Or will asterisk work ONLY with cards with hfc chipsets? Cheers, Arik

Hey all, ? I'm trying to get an E400P and 2 X100Ps working together in the one box and don't seem to be having much luck. ? I can get the two different types of boards working separately, but not together.? I've made calls on both the X100P and have seen sync and correct signalling on the E400P.? But when I try to enable to configs together I get the following: ? modprobe wcfxo

Morning Asterikians, I've just got my nice shiny quadBRI card, and it seems to be working very well - except for one little issue - CallerID. The card is currently connected to an ISDN2e line in P2P mode, and an S0 adapter on our existing alcatel PBX. The S0 connection recieves callerID and displays it correctly - the 2e line doesn't, and BT have said that CLID was enabled on the

Hi all, Does anybody of you have the winbond w6692 working with the mISDN/chan_misdn.so? When loading chan_misdn.so from Asterisk, I get a "No lower Id port:1" error. The /var/log/messages file says: "MISDN free_device: entitylist not empty" I'm using Linux 2.6.11.11 + mISDN-CVS-2005-05-01 + Asterisk 1.0.7 + Zaptel 1.0.7 chan_misdn build from chan_misdn-beta-0.0.3-rc6

Hi, I am looking to integrate Asterisk with a Siemens HiCom 150e via BRI and wondered if anyone is able to offer any advice. In simplistic terms, my goal is to pass calls from the HiCom to the Asterisk box. e.g: HiCom user dials access code and can call Asterisk extension or establish SIP call over Internet. Likewise, I'd like Asterisk to be able to present a call to the Hicom, either

Hi, I'd like to realize the following setup traditional phones --> pbx (non ip ) --> asterisk --- ISDN network is it possible to set up an asterisk server in such way that it acts as gateway between a traditionnal pbx and an isdn network ( I'm in France ). this to let people continue with their existing pbx + phones and enjoy voip features ? outgoing calls: if yes,do I need

Hi all, I have just been reading an article on the asterisk-doc site about ISDN X-Over cables. The article mentioned the converting of an NT1 to make this possible, has anybody got the information required to modify a BT NT1? Or any information on the BT NT1. Thanks in advance. Regards Dave

Users withing the office can dial a 3 digit extension and that will ring a phone. The problem I'm running into is you have to press xxx then press 'send or 'dial'. The pbx doesn't recognize a 3 digit number as an internal extension and automatically dial it the user has to initiate that call. Asterisk automatically initiates calls w/ 9+7 digits and LD calls,

Hi all ! We have 3 NTBAs which are all going to our existing PBX. Our areacode is 06003 and our DDI enabled number 9141. I want to exchange that PBX with Asterisk, but still struggle to get it working. My CAPI.CONF is currently like this: [general] nationalprefix=0 internationalprefix=00 rxgain=0.800000 txgain=0.800000 [interfaces] context=in-capi msn=60039141 incomingmsn=* controller=1

-----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Zoltan Szecsei Sent: zaterdag 16 juli 2005 12:54 To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] Multiple ISDN BRI Units with Asterisk usingBristuff zaphfc in NT mode? >> Maybe this is rather a hardware question,

hi all, i have a probably very stupid question/problem. for testing purpose i am trying to get asterisk running with two isdn cards. I'd only like to here the demo sound when i call the number - but nothing works. The output of show channels is not showing any channel - should there be 4 channels ? - capi info shows my two cards perfectly. The ISDN Controller's are attached to an PTMP

Hi; in our server we dont have "iptables" command! and i am trying to install it with that yum -y install iptables after this command it says that "...nothings to do". Do you have any suggestion for installing the iptables? thanks a lot.... Note: CENTos 5.1 is istalled... -- Tolun ARDAHANLI Bilgisayar Muhendisi E-posta:tolun.ardahanli at linux.org.tr Icq:326600

I connect Asterisk to my analog PBX using X100P. In my analog PBX, I need to dial 0 (zero) to pick up the line. How can I use Dial command to dial (0 + telephone number) directly? I used exten => 10,1,Answer() exten => 10,2,Dial(Zap/1/0) exten => 10,3,Hangup It works, but I need to dial 10 and after the ring tone, the telephone number How can I do?

I'm new to this list. Reading the asterisk handbook pdf (good work) but but still have some questions. Using Trustix 2.1 and installed Asterisk via CVS, zaptel and libpri. We have a dedicated server which is connected to our telephone company. It makes us able to call ordinary phones via VOIP using Ericsson DRG22. Would like to make people able to call me - and get a message "dial 1

Hello, I'm really new on Asterisk. Is it possible to use a telephone machine connected to a modem as an asterisk voice input output device? I do not need PSTN connection. The scheme i'm thinking about is; user -> phone -> modem -> asterisk -> ip -> vice versa. If it is possible can a user dial another asterisk user via the phone? I've searched astersik lists but

Hi, I have a Cisco 7960G phone for which I know the pinout of the headset socket. I have a couple of standard telephone headsets which I do not know the pinout of. I'd like to connect the two. If I have the pinout of a normal/standard headset I can rewire the ones I have to match the cisco. Thanks Mike

Hello All, I am looking for a IAX2 analog telephone adapter, just want to ask your views on which ones are bad, good and the best. Thanks in advance, Dinesh Birlasekaran Network Engineer, ComIT, Institute of Molecular and Cell Biology 61 Biopolis Drive, Singapore 138673 HP : 92962676 DID : 65869804 Fax : 67791117 Email : dinesh@imcb.a-star.edu.sg WWW: www.imcb.a-star.edu.sg