similar to: dialing out to PSTN from SIP phones

Displaying 20 results from an estimated 10000 matches similar to: "dialing out to PSTN from SIP phones"

2003 Nov 06
2
Dialing an outside number -- QUESTION --
Hello-- I'd like to do a little processing on external phone numbers from within the asterisk pbx. Fairly simple stuff, but... devilishly hard to make it work so far! 1. I'd like to dial 9 to get an outside line. 2. If the number dialed after the 9 is 754XXXX, I'd like it to go thru unmodified. It's the only local number available here. 3. I'd like all 1 XXX XXX XXXX numbers
2005 Mar 26
1
Dialout handler with/without leading 1
If this handles the case where 10 digits are required: exten => _9NXXXXXXXXX,1,StripMSD,1 exten => _NXXXXXXXXX,2,Dial,Zap/4/BYEXTENSION How do you create a handler which works for either this or the case with a leading '1' plus 10 digits? tnx -kim -- w8hdkim@gmail.com
2004 Jun 15
3
Outgoing DTMF when using BRI & i4l (Eicon Diva) - problems
Hello all, This afternoon I had a BRI line installed by Telstra (our telco in Australia). I'm using an Eicon Diva 2.02 PCI ISDN card with the isdn4linux driver. Incoming and outgoing calls with Asterisk work fine (and with no echo - my main reason for getting ISDN). However, I can't seem to get outgoing DTMF working (incoming works fine). I made a call from my desk phone (Cisco 7940G)
2004 Jan 07
3
manipulating with numbers - StripMSD, Prefix
Hello, I can not seem to be able to get StripMSD and Prefix to work for me in extensions.conf. This is an example of what I have: exten => _050.,1,StripMSD,1 exten => _50.,Prefix,01051 exten => _001051.,1,Dial(${TRUNK2}/${EXTEN}) exten => _001051.,2,Busy exten => _001051.,102,Busy What I want to achieve is to call 001051501657887 on TRUNK2 when dialing 0501657887. dialing
2004 Aug 26
1
Newbie needs help - Dev_Kit_Lite installation problem
Installing DevkitLite hardware (Very similar to John Lange's post on Tue Oct 08 2002) I cannot get anything to work on the phone connected to the s100u. I dont know what to do. Can someone please help me? I used the sample configuration files from digium documentaion that was supposed to be "sane" defaults for the kit. Very similar to John Lange's post on Tue Oct 08 2002 Here
2003 Oct 02
2
Problem with Dutch PSTN-line on X100P
Yo all, I have a problem with a Dutch (KPN) PSTN-line, connected to an X100P. The call wil sound OK at first, but after 10-20 minutes, the audio will start to crackle. Soon after that, this crackle turns into a continuous noise and the parties won't be able to hear eachother anymore. It also sometimes happens that the party on the TDM400P hears a very loud, short-delay echo of themselves,
2003 Apr 28
9
Dialing using X100P
My setup: X100P and Quicknet PhoneJack. I can't seem to properly set up a Zap channel for my X100P. Here are some of my configurations: [zaptel.conf] fxsks=1 #X100P fxoks=2 #Quicknet PhoneJack defaultzone=us loadzone=us [zapata.conf] [channels] context=local signalling=fxs_ks channel->1 ;X100P [extensions.conf] ... [local] exten=>_NXXNXXXXXX,1,Dial,Zap/1 ;I'm pretty sure the
2003 Sep 03
1
SIP to PSTN gateway
Hello all, taking examples from various pointers, I am attempting to put together an outbound dialing example using SIP (Cisco 7960) with 2 X100P. Everything seems to be working without generating errors, but the problem is the phone hangs up (102/Bye). Any pointers/advice are much appreciated Here is the section in extensions.conf: extensions.conf ; From CISCO at work ; exten =>
2006 Jan 12
0
SOLVED: SIP phones can't pick up incoming call on analog (PSTN) trunk - signalling problem?
Yo! I changed callprogress to no, and in wcfxo.c source around line 334 i changed the value 32000 and -32000 to 10000 and -10000 because it had something to do with the DC voltage when it was ringing. I found reference here (http://www.voipuser.org/forum_topic_1791.html) with an interesting diagram of wiring that was incorrect for sending voltage to a phone or something like that. So put it
2003 Mar 31
2
iax problems
I'm having some trouble with placing some iax calls over an openvpn: Setup A is a 1.8GHz Celeron, T100P attached to a Zhone Zplex. Setup B is a 266MHz P2, T100P attached to a Zhone Zplex. Setup C is a 700MHz P3, T100P attached to an Adtran TA 750. Setup D is a 233MHz Pentium, with an X100P. Setups A and B are on the same physical network. IAX calls routed between them work fine. Setup D is
2004 Oct 05
2
Dialing a # in phone number?
Hi, I have not been successful in working out how to dial a # within a phone number. EG: exten => _12345,1,Dial(Zap/1/0868563823#,5,t) or exten => _08XXXXXXXX,1,Dial(Zap/1/${EXTEN}#) I'm trying to append a # character so that I can use a cellsocket (mobile phone to pots adapter) connected to an x100p. I think that asterisk is simply ignoring the # character. The docs on
2004 Jun 22
2
Any echo issues with phones from TDM400P > X100P
Hi, I'm thinking of purchasing a TDM400P card and was wondering if anyone has experienced any echo issues with phones off these cards connecting to the PSTN via the X100P cards? I have had my fingers burnt with a Voip phone > X100P. Cheers, Taff. --------------------------------- ALL-NEW Yahoo! Messenger - sooooo many all-new ways to express yourself -------------- next part
2004 May 07
6
X100P keeping PSTN line Offhook
Happens quite often. X100P FXO card puts the PSTN line offhook, so that no calls go out or come in. The outside callers get a busy siganl while inside callers cant dial PSTN. Its a DELL optiplex P3 128MB ram 500MHz processor. Here is some more info: (see the zapata.conf in the end) Please direct me where to look for problem. Thanks!!! ======================================== pbx1*CLI> zap
2004 Jul 06
4
Odd Zap dialing problem
I've come across an odd dialing problem with my * setup. After * has been running for a while, if I try to dial out on any of my zap channels, (both are X100P cards) it picks up the line but never sends the DTMF. Has anyone heard of or seen this problem before? Right now I'm looking at 19 hours of uptime on * itself. If I restart it, everything works fine for a little while, then the
2004 Sep 29
3
Calling Waiting on PSTN line
I have looked through tons of wiki etc and still have not found an working answer for this. Does Asterisk support call waiting on a PSTN line(through an X100P card). I hear the beep but I can't get it to flash to the other line. Anyone with a wokring configuration, PLEASE, send it along. Thanks Martin -------------- next part -------------- An HTML attachment was scrubbed... URL:
2005 Sep 26
1
StripMSD or extension parser bug?
For years we've had the following simple context for outgoing calls: [outtrunk] ; match any NANP, and strip leading 1 off exten => _1XXXXXXXXXX,1,StripMSD,1 ; dial outbound on trunk group 1 exten => _XXXXXXXXXX,2,Dial,Zap/g1/${EXTEN} But when I upgraded on Friday to the latest CVSHEAD, this no longer works. If I send 13115552368 to this context, I get a message like pbx.c: Channel
2004 Aug 17
0
RE: RE: dialing out
Nevermind. Figured this out. I needed the following in extensions.conf to enable outbound dial. exten => _9.,1,Dial(Zap/2/${EXTEN:1},70,Tt) Thanks -----Original Message----- From: Info [mailto:info@psgsite.com] Sent: Tuesday, August 17, 2004 9:27 AM To: 'asterisk-users@lists.digium.com' Subject: RE: dialing out Thanks to Greg Hill for pointing me to the 'sip debug on'
2004 Aug 17
0
RE: dialing out
Thanks to Greg Hill for pointing me to the 'sip debug on' cmd that helped me resolve the sip connection problem! The other issue I'm trying to resolve is configuring outgoing calls. I need to configure outgoing calls to use the FXO card in the PBX (zaptel device) via sip connected ip phones when a user dials 9. I need to support local and long distance dialing. Below is an excerpt of
2004 May 22
2
How to share Zap channels in 2 Asterisk servers
Hello I am trying to setup Asterisk on 2 servers PBX300 and PBX200. PBX300 has X100P card with 1 telephone line. PBX200 don't have any Zap device. Softphone from PBX200 can talk to softphone on PBX300 but no outgoing call from PBX200. I can call from PBX300 outside but I am unable to configure soft Phone defined in PBX200 to dial out side using PBX300 Zap devices. I am geting error
2003 Mar 21
8
Help with linejack as a trunk?
I have a linejack and a phone jack in my asterisk server working well between the SIP phones and the phonejack. what I cannot get to work is the outbound linejack Phone/phone0 trunk line? how can I get a SIP or Phone/phone1 phonejack phone to dial 9 then outside number and pickup Phone/phone0 and dial it? right now it accepts a 95551212 but busy's on the last digit 2. no outside dial.