similar to: PRI Error T100P

Displaying 20 results from an estimated 5000 matches similar to: "PRI Error T100P"

2003 Jun 25
2
Possible solution to Zaptel panics
Heya Mark (and others), Here's an update on my adventures while trying to debug the Zaptel-related panics, as discussed on this list a while back. While debugging the problem, I completely swapped the machine for an entirely different model (Supermicro dual Xeon 2.4GHz with 2Gb of RAM), put the cards in, recompiled * + Zaptel and administered my stress-test. The machine stayed up in excess
2004 Apr 12
5
T100P / ZAP / PRI errors
My PRI is being reset at least once a day with the following errors in the logs. zaptel, zapata, libpri, and asterisk are from CVS this morning.. This has been happening for weeks on all versions (including -stable). the T100P card appears to NOT be sharing an IRQ. xenon# cat /proc/interupts CPU0 0: 1203977 XT-PIC timer 1: 3 XT-PIC keyboard 2:
2003 Oct 15
2
Problem with T100P card in a new chassis
Due to some failed hardware on another platform, I've had to move a T100P card to a different chassis. After this move was completed, I am seeing some strange results on the T100P card that do not display to me any failure mode with which I am familiar. The card comes up, and shows "good" carrier and status, but Asterisk refuses to bring the D-channel up. Calls of course do
2005 Mar 22
6
IRQ headaches
Excuse my ignorance here, but I am desperately trying to isolate the IRQ for my TE110P card (shown below as t1xxp) Ive gone into my bios and disabled all usb , parallel, serial and some other devices, those that I needed to keep, I have moved off of IRQ 10 and onto IRQ 5, but everytime I boot up, I get usb-uhci and ehci_hcd using IRQ 10 as well as my Digium card. Does anybody know what these are
2004 Dec 21
1
zaptel ppp HDLC Receiver Overrun messages
I have a pair of sites tied together with a T1 line running zaptel PPP on either end. The system works, but I keep getting these messages in the kernel logs, and users are reporting connection problems (TCP timeouts, and hangs) especially under high usage. --snip-- HDLC Receiver overrun on channel WCT1/0/1 (master=WCT1/0/1) HDLC Receiver overrun on channel WCT1/0/1 (master=WCT1/0/1) HDLC
2004 Jun 10
1
mysql errors
Since updating * via CVS earlier this week, I've been having problems with cdr_mysql. Prior to that time my queries and cdr all worked fine. Now, even though my queries still work, I get the messages similar to this: ERROR[1211374384]: cdr_addon_mysql.c:203 mysql_log: Failed to insert into databas -- Hungup 'Zap/74-1' Anyone have any suggestions what went wrong?
2006 Apr 04
2
Fax over 2 bridged TE110P channels
Hi, I have an asterisk installation with 2 E1 cards Software version is Asterisk 1.2.6 Libpri 1.2.2 Zaptel 1.2.5 I'm having problem with fax transmission, let me explain better my setup: My fist TE110P E1 card is connected to the telco line the second TE110P E1 one to an Nexspan PBX so the server is basically sitting between the line, and the pbx. every call coming from the line is
2004 Aug 31
4
T100P No D-channels
Hi Last week I installed Asterisk (release1) with digium t100p single span T1 (wct1xxp) board on Dell GX270 pc configured for PRI. Asterisk/t100p is currently the only user of the t1 line. All worked well for about a half a day, PSTN to SIP phones to non-SIP IP phones etc. Alas, since then I consistently get multitudes of blue alarms on all b-channels followed by a loss of d-channel: Aug 31
2005 Mar 18
0
T100P: Can't Make/Receive Zap Calls (Long Newbie Blah)
All, Alright, I've looked around the internet, the voip-info.org wiki, and browsed the contents of this mailing list. While I've found a couple of scenarios that are close to this one, I haven't found one that uses my particular card (T100P). Without further delay -- I have successfully configured internal SIP services between a Snom 200 and a Windows X-Lite client and have
2005 Dec 28
6
ServeRAID 4Lx - Plain 2.6.12.6 works - Xen not
Hi *, I try to install Xen 3.0.0 on a IBM x342 with a ServeRAID 4Lx controller. The box boots with "plain" 2.6.12.6 (aic7xx- and serveraid-support included). It does not with a similar configuration of 2.6.12.6-xen0. Any hints, boot options? by Töns -- There is no safe distance. _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com
2003 Oct 28
1
Software FAX Modem--One Last Request For Help
Here's one last plea for help from the list before I give up on the totally cool software FAX modem concept in complete despair (for now, at least, until I have more time to dig into it).... I am simply not able to successfully receive a FAX no matter what device I transmit from or how I bring the call into Asterisk. My lastest effort was a call from a Pitney-Bowes FAX machine into an X100P
2004 Jul 19
4
FATAL: Module zaptel not found.
Dear Sirs, I'm running an Asterisk 0.9.1 in a Fedora Core 2 box. I installed a X100P card on my box and when i try to load modules i am rejected. When i type modprobe zaptel my Fedora respond : "FATAL: Module zaptel not found." . The same uccurs when i type "modprobe wcfxo" May you help me. Thank you in advance Juanjo
2008 Apr 03
1
rtc issue
Hi all, I have installed centos 5.1 x86_64. 2.6.18-53.1.14.el5 Everything seems to be working fine except that the rtc module is not working. cat /proc/interrupts shows: CPU0 CPU1 0: 129 0 XT-PIC-XT timer 1: 330797 0 XT-PIC-XT i8042 2: 0 0 XT-PIC-XT cascade 3: 4 0
2009 Jun 16
2
tdm loosing interrupts and latency
Hi I have come across a problem, with my tdp410 and soekris board (basically pc on a chip amd geode cpu). I am using the box as a firewall/asterisk box. The problem occurs when I drop ppp and I get dead loop dectiotn going, I seem to lose interrupts and get lots of messages in syslog from wctdm24xx saying missed interrupt increasing latency its out lined here
2005 Jul 24
1
Do I have to worry about interrupt sharing here?
Hello I am using a Junghanns QuadBRI ISDN card - the module name is qozap. If I like at my interrupt assignment, qozap is sharing interrupt 10 with libata and uhci_hcd. I think libata is the IDE hard drive module and uhci_hcd is a USB module. linux:~ # modprobe qozap linux:~ # cat /proc/interrupts CPU0 0: 12634579 XT-PIC timer 1: 10 XT-PIC i8042
2004 Nov 20
2
zaphfc sound problems
hi list. after my unsuccessfull experiences with mISDN i tried again to implement a zaphfc based solution. problem is: sound on calls via capi is stuttering/broken and therefore unuseable. my conf: - cel 1300, 256mb ram - avm b1 via capi connected to my outgoing ISDN - acer surf pci via zaphafc and crosslink cable with termination as internal bus - siemens gigaset 3035 as internal phone -
2004 Apr 12
1
Re: Booting error - Unable to specify channel 2:
> Subject: Re: [Asterisk-Users] Booting error - Unable to specify channel 2: > No such device I just went through all this as well. The best thing to do IMHO is to try to find a way to manually assign IRQ in the BIOS. Also, and this is what I didn't see at first, some slots SHARE IRQ. Avoid this! If you are not using USB at all, turn it off in BIOS if possible. Tell the BIOS
2003 Sep 23
3
Port problem
Hi All, I have an equipment loaded with 4 X100P (numbered 1-4)) and one T400P (numbered 5-8). Everything works fine except that I cannot use one of the FXS ports (number 5). If I configure zapata.conf to recognize it, the whole system voice quality suffers. I've tried already to switch PCI slots, with no results. Below is a snapshot of my /proc/interrupts, maybe this can shed some light on
2011 Dec 10
1
Unplugging DVI causes Disabling IRQ #11
I have some new PC hardware I'm using with the Intel H67 chipset. I created a bzImage I use for a PXE environment for a recovery mode, installing OS images, etc. The new mobo doesn't have a VGA port but instead DVI. Everytime I unplug the DVI cable it seems to cause "Disabling IRQ #11". After that the PC is basically unusable. The /proc/interrupts shows that hdd, usb, nic,
2005 Jun 06
5
IRQ Problems
Hello I just installed a TE110P in a Dell Poweredge 750 (rackmount), which is connected via crossover T1 cable to a adit 600. Anyway, I've encountered an array of errors, which I believe I have narrowed down to the 22 IRQ misses I encounter on zttool. I've noticed that the te110p and the usb device share an IRQ. Could that be the source of my woes? Would disabling the usb device in the