similar to: Cisco 7970 and Skinny

I currently have two Cisco phones, a 7960 and 7970. The 7960 has a SIP OS on it and the 7970 has a SCCP. When the 7960 powers up it loads OS79XX.TXT, SIPDefault.cnf, SIP000E3875266C.cnf, RINGLIST.DAT, and dialplan.xml. I have a Cisco SmartNet agreement with the phone so I have access to download the firmware. I recently purchased a Cisco 7970 phone and was in the process of configuring

Hi, After reading this valuable forum and the voip-info wiki and follow all the steps , but my Cisco 12SP+ remains unregistered. These are my config files: skinny.conf [general] port = 2000 ; Port to bind to, default tcp/2000 bindaddr = 172.20.1.1 ; Address to bind to dateFormat = D-M-Y ; M,D,Y in any order (5 chars max) keepAlive = 120 languaje=es allow = all ; disallow

Can't seam to make a call transfer. I tried dialing pound and transferring a call to extension 222. This just results in a disconnect. The exact steps a took were Dial pound, dial 222 and hangup. This is the result from the verbose output. Recieved Stimulus: Transfer(0) Collected digit: [2] Collected digit: [2] Collected digit: [2] skinny_hangup(Skinny/8077@duba-2) on 8077@duba Am I

I have a bunch of 7910's that I managed to get registered with Asterisk 1.2.14: managed5*CLI> skinny show devices Name DeviceId IP TypeId R Model NL -------------------- ---------------- --------------- ------ - ------ -- test7 SEP0004C1878F8E 192.168.0.226 6 Y 7910 1 The problem is that the phone resets when I attempt to make a call from it or place a call to it. If I pick up I have

I have gotten some cisco VIP 12 and VIP 30 IP phones that I would like to use with asterisk, I have set them up using chan_skinny. The phones work well, except the only problem is that it is like the cisco phones are muted. When I talk on the cisco phones I can hear my self through the ear peice, but the person who I am calling can not hear me at all. I have tried various cisco phones from various

We're using Cisco phones running skinny protocol. When I call other extensions I don't get a ringtone, although the remote end does ring and when answered we get clear two way audio. When I call a queue from a skinny phone then I don't hear the announcements. Likewise we don't hear music on hold on these phones, although we can see mpg123 in the process list and ls -l the fd

Hello I have an interesting situaltion and not sure if I am doing something wrong or it is a BUG. I Installed Rhino Channel on T1 line and connected Analog Phone on Rhino's Zap Channels. When I pickup analog phone and hangup without dialing any number , I am getting extra ring after hangup and if I dial any digit than there is no ring on Analog phone after hangup. Log's looks like this

Hi, I need help finding why my system is dropping calls.. I enabled debugging on my box in the hope it would lead me to the answer as to why my system is dropping calls but unfortunately nothing is jumping out at me.. I have attached the portion of the messages file for two calls that were dropped.. (numbers names and ip's have been changes to protect the innocent) Can someone give me a

In Asterisk 1.8, I used the following line in extensions.conf to allow me to pass "*82" in front of a dialed number, to disable the callerid block that's normally on that POTS line: ; disable callerid block exten => _*82.,1,Dial(${POTS}/${EXTEN}) But this seems to have stopped working when I upgraded to Asterisk 11.7. I get the following debug output, with a "no

Hello I have an interesting situaltion and not sure if I am doing something wrong or it is a BUG. I Installed Rhino Channel on T1 line and connected Analog Phone on Rhino's Zap Channels. If i pickup analog phone and hangup without dialing any number , I am getting extra ring after hangup and if i dial any digit than there is no ring on Analog phone after hangup. Log's looks like this

Hello I have an interesting situaltion and not sure if I am doing something wrong or it is a BUG. I Installed Rhino Channel on T1 line and connected Analog Phone on Rhino's Zap Channels. If i pickup analog phone and hangup without dialing any number , I am getting extra ring after hangup and if i dial any digit than there is no ring on Analog phone after hangup. Log's looks like this

Can anyone recommend a good voip provider? Thanks

Hi, I'm having problems using a TDM400P Card. I put my SIM card in a Nokia Premicell and connected it to a TDM400P card but when I make calls to the number, it hangs up automatically. The card also can't call out. Any ideas? I've searched the archives without much success. I appreciate all your help. Details: I'm using Asterisk 1.2.17 on Fedora Core release 5 (Bordeaux). On an

Hi Steve, I am having this problem in which RxFax is still holding the file after receiving a complete fax. Somehow the zap channel is still active but on the fax client it was sent successfully. If you call the line it is still busy. Changed from phase 3 to 4 >>> MCF: 8c HDLC underflow in state 8 Changed from phase 4 to 3 Slow carrier up <<< DCN: fb DCN with final frame tag

Problem: *Call* *waiting* comes in, I press flash to answer it, and the first caller gets disconnected after 3 seconds. This is all ZAP - no VOIP. System: Analog stations and trunks running on a pair of TDM400's. It does NOT have * call* *waiting* from the phone company, and I have enabled it in all my conf files. The trunks are set to FXSKS and the stations are FXOKS. I am not using *call*

Hi, We try ti hide the caller id at calls trought E1 in EuroISDN (Spain) using restrictcid=yes and doesn?t work. What can I do, thaks Pedro -----Mensaje original----- De: asterisk-users-admin@lists.digium.com [mailto:asterisk-users-admin@lists.digium.com]En nombre de asterisk-users-request@lists.digium.com Enviado el: mi?rcoles, 31 de marzo de 2004 12:00 Para: asterisk-users@lists.digium.com

_____ Von: Pascal Speck [mailto:p.speck@ewersbach.net] Gesendet: Montag, 5. September 2005 10:37 An: 'asterisk-users@lists.digium.org' Betreff: Timeout when Dialing - HELP When i try to do a call I get this message after a few seconds: I IND :TIMEOUT pid:1 mode:NT addr:51400102 port:2 --> l3id:10040 cause:16 dad:800759 oad:20 channel:1 port:2 --> lib: prim 34582

Howdy, 1 x TDM400P card with 1 x fxo module. 1 x BT Pots line. Location - UK Calls work fine outbound but i'm unable to pickup the inbound calls. Asterisk debug: Asterisk -vvvvvvvvvvcg *CLI> -- Starting simple switch on 'Zap/1-1' -- Executing Wait("Zap/1-1", "1") in new stack -- Executing Answer("Zap/1-1", "") in new stack

I'm running a setup with chan_misdn on a austrian PTP-line. When somebody dials in without an extension, he gets a busy signal. I don't see the call at all in asterisk. I *have* set immediate=yes in misdn.conf. And I *do* have an s-extension in my dialplan for the context used by misdn. Calls that provide an extension work fine. Attached is my misdn.conf and a verbose 3, misdn set debug