Eric Cooper
2014-Feb-12 23:23 UTC
[asterisk-users] how to selectively disable callerid block?
In Asterisk 1.8, I used the following line in extensions.conf to allow
me to pass "*82" in front of a dialed number, to disable the callerid
block that's normally on that POTS line:
; disable callerid block
exten => _*82.,1,Dial(${POTS}/${EXTEN})
But this seems to have stopped working when I upgraded to Asterisk
11.7. I get the following debug output, with a "no call pickup
possible" message as soon as I press the '8':
[Feb 12 18:17:39] -- Starting simple switch on 'DAHDI/2-1'
[Feb 12 18:17:39] DEBUG[2339]: devicestate.c:442 devstate_event: device
'DAHDI/2' state '2'
[Feb 12 18:17:42] DEBUG[5898][C-0000000e]: sig_analog.c:1600 analog_handle_dtmf:
Begin DTMF digit: 0x2A '*' on DAHDI/2-1
[Feb 12 18:17:42] DEBUG[5898][C-0000000e]: chan_dahdi.c:2145 my_handle_dtmf:
Begin DTMF digit: 0x2A '*' on DAHDI/2-1
[Feb 12 18:17:42] DEBUG[5898][C-0000000e]: sig_analog.c:1600 analog_handle_dtmf:
End DTMF digit: 0x2A '*' on DAHDI/2-1
[Feb 12 18:17:42] DEBUG[5898][C-0000000e]: chan_dahdi.c:2145 my_handle_dtmf: End
DTMF digit: 0x2A '*' on DAHDI/2-1
[Feb 12 18:17:42] DEBUG[5898][C-0000000e]: sig_analog.c:2121 __analog_ss_thread:
waitfordigit returned '*' (42), timeout = 0
[Feb 12 18:17:44] DEBUG[5898][C-0000000e]: sig_analog.c:1600 analog_handle_dtmf:
Begin DTMF digit: 0x38 '8' on DAHDI/2-1
[Feb 12 18:17:44] DEBUG[5898][C-0000000e]: chan_dahdi.c:2145 my_handle_dtmf:
Begin DTMF digit: 0x38 '8' on DAHDI/2-1
[Feb 12 18:17:44] DEBUG[5898][C-0000000e]: sig_analog.c:1600 analog_handle_dtmf:
End DTMF digit: 0x38 '8' on DAHDI/2-1
[Feb 12 18:17:44] DEBUG[5898][C-0000000e]: chan_dahdi.c:2145 my_handle_dtmf: End
DTMF digit: 0x38 '8' on DAHDI/2-1
[Feb 12 18:17:44] DEBUG[5898][C-0000000e]: sig_analog.c:2121 __analog_ss_thread:
waitfordigit returned '8' (56), timeout = 0
[Feb 12 18:17:44] DEBUG[5898][C-0000000e]: chan_dahdi.c:5075 dahdi_enable_ec:
Enabled echo cancellation on channel 2
[Feb 12 18:17:44] DEBUG[5898][C-0000000e]: features.c:7880 ast_pickup_call:
pickup attempt by DAHDI/2-1
[Feb 12 18:17:44] DEBUG[5898][C-0000000e]: features.c:7900 ast_pickup_call: No
call pickup possible... for DAHDI/2-1
[Feb 12 18:17:44] DEBUG[5898][C-0000000e]: sig_analog.c:2211 __analog_ss_thread:
No call pickup possible...
and then a busy signal.
I didn't pay much attention to the differences between Asterisk 1.8
and 11.7 since everything seemed to still work ... Can someone point
me in the right direction?
--
Eric Cooper e c c @ c m u . e d u
Hi Eric, Take a look at the call pickup code, maybe you need to change it to not conflict with your dialplan: localhost*CLI> features show Builtin Feature Default Current --------------- ------- ------- Pickup *8 *8 Blind Transfer # #1 Attended Transfer #2 One Touch Monitor Disconnect Call * * Park Call #3 One Touch MixMonitor 2014-02-12 21:23 GMT-02:00 Eric Cooper <ecc at cmu.edu>:> In Asterisk 1.8, I used the following line in extensions.conf to allow > me to pass "*82" in front of a dialed number, to disable the callerid > block that's normally on that POTS line: > > ; disable callerid block > exten => _*82.,1,Dial(${POTS}/${EXTEN}) > > But this seems to have stopped working when I upgraded to Asterisk > 11.7. I get the following debug output, with a "no call pickup > possible" message as soon as I press the '8': > > [Feb 12 18:17:39] -- Starting simple switch on 'DAHDI/2-1' > [Feb 12 18:17:39] DEBUG[2339]: devicestate.c:442 devstate_event: device > 'DAHDI/2' state '2' > [Feb 12 18:17:42] DEBUG[5898][C-0000000e]: sig_analog.c:1600 > analog_handle_dtmf: Begin DTMF digit: 0x2A '*' on DAHDI/2-1 > [Feb 12 18:17:42] DEBUG[5898][C-0000000e]: chan_dahdi.c:2145 > my_handle_dtmf: Begin DTMF digit: 0x2A '*' on DAHDI/2-1 > [Feb 12 18:17:42] DEBUG[5898][C-0000000e]: sig_analog.c:1600 > analog_handle_dtmf: End DTMF digit: 0x2A '*' on DAHDI/2-1 > [Feb 12 18:17:42] DEBUG[5898][C-0000000e]: chan_dahdi.c:2145 > my_handle_dtmf: End DTMF digit: 0x2A '*' on DAHDI/2-1 > [Feb 12 18:17:42] DEBUG[5898][C-0000000e]: sig_analog.c:2121 > __analog_ss_thread: waitfordigit returned '*' (42), timeout = 0 > [Feb 12 18:17:44] DEBUG[5898][C-0000000e]: sig_analog.c:1600 > analog_handle_dtmf: Begin DTMF digit: 0x38 '8' on DAHDI/2-1 > [Feb 12 18:17:44] DEBUG[5898][C-0000000e]: chan_dahdi.c:2145 > my_handle_dtmf: Begin DTMF digit: 0x38 '8' on DAHDI/2-1 > [Feb 12 18:17:44] DEBUG[5898][C-0000000e]: sig_analog.c:1600 > analog_handle_dtmf: End DTMF digit: 0x38 '8' on DAHDI/2-1 > [Feb 12 18:17:44] DEBUG[5898][C-0000000e]: chan_dahdi.c:2145 > my_handle_dtmf: End DTMF digit: 0x38 '8' on DAHDI/2-1 > [Feb 12 18:17:44] DEBUG[5898][C-0000000e]: sig_analog.c:2121 > __analog_ss_thread: waitfordigit returned '8' (56), timeout = 0 > [Feb 12 18:17:44] DEBUG[5898][C-0000000e]: chan_dahdi.c:5075 > dahdi_enable_ec: Enabled echo cancellation on channel 2 > [Feb 12 18:17:44] DEBUG[5898][C-0000000e]: features.c:7880 > ast_pickup_call: pickup attempt by DAHDI/2-1 > [Feb 12 18:17:44] DEBUG[5898][C-0000000e]: features.c:7900 > ast_pickup_call: No call pickup possible... for DAHDI/2-1 > [Feb 12 18:17:44] DEBUG[5898][C-0000000e]: sig_analog.c:2211 > __analog_ss_thread: No call pickup possible... > > and then a busy signal. > > I didn't pay much attention to the differences between Asterisk 1.8 > and 11.7 since everything seemed to still work ... Can someone point > me in the right direction? > > -- > Eric Cooper e c c @ c m u . e d u > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > New to Asterisk? Join us for a live introductory webinar every Thurs: > http://www.asterisk.org/hello > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >-------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20140213/a3a28d16/attachment.html>