similar to: no signal, mgcp

> Hello all, > Can someone help me on the problem which I have on MGCP phone test . I test mgcp - asterisk- zap. But I got several NOTICE message from rtp.c. > NOTICE[20501]: File rtp.c, Line 221 (process_rfc3389): RFC3389 support > incomplete. Turn off on client if possible > > -- Endpoint 'aaln/1@VG101-1-1' observed '9' > NOTICE[20501]: File rtp.c,

Does anybody has the expirience configuring Asterisk with Cisco ATA 186 MGCP firmware ? I have Cisco software v3.1.1 atamgcp (Build 040629A) Asterisk 1.0-RC1 On ATA i only put domain test. mgcp.conf looks like this [test] host = 192.168.195.55 context = default line => aaln/2 line => aaln/1 Asterisk CLI shows this: Jul 31 16:05:40 WARNING[135449600]: chan_mgcp.c:485

Hello folks, I'm trying to get an 8x8 DTA-310 running mgcp to work. I get no dialtone & can't get it to ring. My mgcp.conf says: ; ; MGCP Configuration for Asterisk ; [general] port = 2427 bindaddr = 0.0.0.0 [172.16.2.25] host = 172.16.2.25 context = default line => aaln/1 And here's the interesting bits of extensions.conf: [globals] ... TRUNK=H323/BYEXTENSION@pstn_gw ...

Hi, in following of a recent discussion I got to work on MGCP with the Cisco ATA186 again, and got it to work very nicely. However, there is a little thing with transfers I would like to get comments on: Call comes in from PSTN and goes to an ATA186 (MGCP) Call is answered and then, using flash, transferred to another extension If the extension is available, there can be an announcement and

Hi all, i am using CVS-HEAD-08/13/04-12:00:00-BRI-stuffed-0.1.0-RC4a with Cisco ATA-186 3.1.1 atamgcp We are used to make an special ;) blind transfer like (Flash)Number(Hangup before anyone answers or ring). Then * crashes (see below) if the man in the middle is an cisco-ata-186-mgcp If one waits until the last one rings, then hangup, everything is fine. If one waits until the last one

Hey guys, can you shead some light on this? I will copy my mgcp.conf and post below, but here is the problem. I can't get call waiting to work with my MGCP device. I already have one call going, and I can hear the second call come in, I flash over to it, but all I get is a dial tone, * puts the 1st call on mute/hold, but I never get the second, and it terminates. I flash back over and pick

Hello all, I'm looking for some help to try to understand why my CPE doesn't work good with Asterisk in MGCP. Here is what I want to do : - Register a TECOM AH4021 on Asterisk in MGCP with the following profile in mgcp.Conf : [general] port = 2727 bindaddr = 10.95.20.1 disallow=all allow=g729 allow=alaw 020202020202] context=mgcp host=dynamic canreinvite=no dtmfmode=rfc2833 nat=yes

Hi everybody, I have a MTA from Terayon that I try to make run with Asterisk using MGCP channel. The device is running with MGCP 1.0 NCS 1.0 Each time Asterisk try to send a Request (Request Notify, Audit Endpoint....) the device returns error 510 "Protocol Error" Does anybody have already meet this problem and provide me support to make run it ?! (I have already try to change

I have 1 IP phone (Swissvoice IP10S) and 1 POTS phone. When I dial the number for the IP phone off the POTS phone, the IP phone rings. But when I pick up the handset on the IP phone, I get a busy signal and this message on *: Aug 23 09:38:57 NOTICE[1142106560]: chan_mgcp.c:2243 handle_response: Terminating on result 502 from svip10@00059002042b-1 Here is the entire session. svip10 is the 1 and

Hi there, ::: i have an mgcp phone (iph-90) using the sample mgcp.conf for it (the dlink section). i've tried both asterisk stable and development release but i'm getting the following error when i lift the receiver: . .. in stable branch: -- MGCP mgcp_new(MGCP/aaln/1@gw52302432-1) created in state: Down while the phone is giving me busy tone . .. in development release:

Just by the way, do anybody knows if call pickup of a call to a sip extension from a mgcp phone is supposed to work (even if sip keeps ringing). The scenary is as follows: 3@mgcp02 (ext 136) calls sip/julia (ext 133) and after It starts ringing 2@mgcp02 (ext 135) dials *8. Nothing happens, only 135 gets congestion tone, 133 keeps ringing and in the asterisk console I get: --

Hello group I just update to the newest CVS now I'm not able to get asterisk to start. No error during the make or make install I did a make clean before the make;make install Any help would be great!!!! Here is the output asterisk -vvvvvgcd Parsing /etc/asterisk/asterisk.conf Parsing /etc/asterisk/extconfig.conf == Binding realtime_ext to mysql/realtime/extensions_table == Binding

Looking at the error I tried moving chan_modem* out of the modules folder and asterisk started and its working again... Not sure what changed in the chan_modem_i4l.so but removing it from the folder fixed my problem. -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Eric Hall Sent: Sunday, January 23, 2005

Hello, I`m try to make the attended transfer work Dlink DG-104S via FLASH, when somebody calls my phone I pickup and press flash to get a second line to call another extension. When I press flash I hear no dialtone, and only a long and then small beep. When I try to dial digits I hear again those long+short beeps, but the extension dialed is not ringing. If I pres flash again I get back to

Hi. I'm new in Asterisk with MGCP. I set up a MGCP user agent and start asterisk with the next configuration files. '--------------- extensions.conf ---------------------------------------------------- [general] static=yes writeprotect=yes [globals] ap1 => mgcp/aaln/ap200@64.76.148.186 [macro-apl1] exten => s,1,Dial(${ARG1},30,Ttmr) ;exten => s,2,Voicemail(u${MACRO_EXTEN})

hi all I'm being spammed by these messages in the console (see below) and sound doesn't work with today's cvs. I rolled back a week, and it works fine. In addition to the sound problems, I had to enable inband dtmf squelch on the dilnk mgcp phones. if not, each pressed key was counted twice NOTICE[245776]: File chan_mgcp.c, Line 710 (mgcp_rtp_read): MGCP ast_dsp_process

If you're using MGCP, we need your help. There's a patch in bugs.digium.com that needs testing by the community. Please spend some time testing and adding your comments to the bug tracker. The author writes: ------------------ I'm trying to make work Asterisk against a Cisco IAD2431 with chan_mgcp. Since chan_mgcp assumes the Line package is the default which is not the usual with

I am trying to dial a mgcp extention from my sip phone and i am getting this error message. anyone got any idea? error I> -- Executing Dial("SIP/2204-5dc2", "MGCP/aaln/1@10.0.1.150") in new stack May 19 22:30:01 NOTICE[1251156800]: chan_mgcp.c:1104 find_subchannel: Gateway '10.0.1.150' (and thus its endpoint 'aaln/1') does not exist May 19 22:30:01

Hi, I picked up a router with 8 voice ports that supports MGCP, but it has several options that I am not familiar with or do not seem apparent in the mgcp.conf. Enter the default IP address for the Notified Entity: [0.0.0.0] Enter the listening port of the Notified Entity: [2427] Enter the IP address for MGCP signalling (Data): [192.168.0.210] Enter the local port for MGCP signaling (Data):

Hi All, I'm trying to hook up asterisk (CVS-HEAD-02/09/05-13:44:11 ) to a ADIT 600 via MGCP. Got it working really nice but now have a pretty bad problem: 1. When I perform a flash on the telephone, I usually get a second dialtone, but when I dial, dialtone doesn't break. If I flash back and forth a few times, it will eventually give me no dialtone.. here if I dial, it successfully