similar to: Windows Drivers for Wildcard FXO Card

Not to sound like a broken record but...... Is there any word on the availability of the FXO cards for the TDM400P? I have an application that would benefit. If it has been dropped please let me know. Thanks Gene Kochanowsky

> Hi! > >> We are in the process of an Asterisk call center deployment using IAX2 >> G711 ulaw softphones. Outbound sound quality is terrible. RESPONSE: This is Bill McCready from PCPhoneline.com . To address your sound quality issues, you may want to check out our VTA1000 Skype+SIP+IAX2 Tri-Mode Gateway which plugs into the USB port of a Windows computer. You can use it

It seems that the Apollo MD3200 winmodem sold my newegg no longer uses the MD3200 chipset. At least the $13 version I ordered arrived with a different chipset. I made them aware of the issue and hopefully they will be changing their description soon. Anyway, I'm looking for a new source now, anyone know where to get these cards cheap? I know there is ebay, but I'm thus far getting sellers

Now that the X100P is no longer being offered by Digium, what is the best solution? I seem to have run into a few posts where people talk about problems they've had with their X100P clone cards (dropping calls, echos, etc) other people seem to not have any problems. Of the three chipsets that will work: Intel 537EP, Ambient MD3200, and Motorola 62802 (as seen here

It seems the information out there on this topic was confusing enough to cause me to waste a lot of time, and that this topic is rehashed periodically. So now it's my turn.... I had a modem with an Intel 537EP chip on it and thought it might work with the zaptel drivers. Initially, it seemed the only issue would be the PCI device & vendor codes. Then, I ran into the problem that

Hello everyone. I hope that this isn't a sore topic, but I've spent a week now reading through everything I could dig up from the archives on this topic, and I'm not yet satisfied with any conclusions presented there. I've also spent a few days hacking on the Asterisk code, trying to understand how things work better, and I'm still not ready to give up. I well-realize

We are looking at building a storage platform based on Dell HW + ZFS (likely Nexenta). Going Dell because they can provide solid HW support globally. Are any of you using the MD1200 JBOD with head units *without* an MD3200 in front? We are being told that the MD1200''s won''t "daisy chain" unless the MD3200 is involved. We would be looking to use some sort of

This is a system for our lab. I have no problem getting rid of X100P clones. But I am just curious why can they work. Even the drivers are not loading correctly. -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Kerry Garrison Sent: Tuesday, May 02, 2006 10:51 AM To: 'Asterisk Users Mailing List -

Did anyone have a way to make codec negotiation work with Asterisk? This is something I would love to have working as well. I won't need PSTN -> G729 mixing. Just SIP -> SIP using G729 for calling remote offices via VPN, but everything else use G711. -----Original Message----- From: Brancaleoni Matteo [mailto:mbrancaleoni@espia.it] Sent: Wednesday, July 16, 2003 11:32 AM To:

Thanks to everyone for your quick responses to this question. I'm very excited about the Asterisk project, and the growing community seems to be very active these days. Hopefully when the time comes for our county's transition to VoIP we may be able to go for an Asterisk-based solution. -- Tony Kava Network Administrator Pottawattamie County, Iowa -----Original Message----- From:

I've just give a look to the website http://www.voip-info.org/wiki-Asterisk+Hardware If I understand very well, the Intel modems marked with 537 or MD3200 chipset should work with Asterisk ?! If it is true, I'd like to know how to configure Asterisk ? Thanks a lot. --------------------------------- D?couvrez le nouveau Yahoo! Mail : 1 Go d'espace de stockage pour vos mails,

Hmm, I don't have /etc/modprobe.conf, and wctdm is giving me problems. Which device is it talking about? [root@asterix /]# modprobe wctdm /lib/modules/2.4.20-8/misc/wctdm.o: init_module: No such device Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters. You may find more information in syslog or the output from dmesg

Salve Salve Galera. Tenho a seguinte situacao: Uma placa MD3200 ligada em uma linha telefonica comum(PTSN) e funcionando "belezinha"... Tenho configurado um URA, onde ele atende a ligacao que chegou no canal e solicita o numero do ramal de destino da liga??o: Acontece que ao discar o ramal de destino, ele nao encaminha a ligacao, ficando mudo e posteriormente caindo a liga?ao. Fiz

X101P with Ambient md3200 chip on it, with the zaptel wcfxo driver.... Just an indication of how many people have got this to work would be useful. Cheers Mark.

Does asterisk support the intel 537/md3200 chipset? I don't want to start any flames here, I know all about using generic crap in asterisk,[*] which I really don't approve of other than for testing, but I have a customer demanding a generic chipset for his one backup analog line. He will not spend the money for a Digium card and says he will find another company if I can not provide a

Hi. I'm working with i4l with asterisk CVS-02/21/03-13:59:12, plus i4l (chan modem i4l *dsp patched* and kernel 2.4.19 patched to disable dtmf). All seems ok (apart some echo issues that seems gone with mec2 aggressive suppressor), but outgoing dtmf doesn't work . or at least I hear the very first part of the dtmf, but then it seems suppressed. here's my modem.conf [interfaces]

Hi. Has anyone provided an easy way to rotate asterisk log files into /var/log/asterisk. I want to do that, because I prefer to have full logging enabled in the debug file and the messages file, but could became pretty big. Same apply for cdr-csv files. I wanted to setup a logrotate rule, but was thinking if I must use a kill -HUP to asterisk. (never tried HUP with asterisk... don't know if

Hi. I'm experiencing that bug with flash on zaptel. That's the problem: Zap/A call Zap/B Zap/B flash transfers to Zap/C Now Zap/A is online with Zap/C Till now all ok... but now if Zap/C wants to transfer again, it can't... the debug says that it got a WinkFlash when call not up or ringing (as attached below, Zap/10 is Zap/C in my example) Apr 2 09:14:01 DEBUG[32789]: File

Hi. I'm getting a strange sip issue, with latest cvs. I was tring the *8 extension for call pickup on sip, but I forget to define the callgroup & pickupgroup in sip.conf . Now when I dial *8 from the crisco phone and hangup, the channel in asterisk don't go down and I'm not able to dial from the phone again. If I do a softhangup on the rem. console it does nothing and the

I was wondering if the accountcode flag works with sip channels. I was looking into the debug and ,even if I have the line accountcode=XXX into the users sections of my sip.conf, I don't see it logged into the cdr. Matteo Brancaleoni mbrancaleoni@espia.it Emmegi System Administrator EspiA - EMMEGI Srl - e*solution provider Uffici: Via Pascoli, 37 20129 Milano - Italy Sede Legale: Corso