similar to: VoicePulse Connect Problems

Is there anyone out there who has VoicePulse Connect working with DTMF? I've been unable to get it to work from the start, and the recent VoicePulse updates did not help. A caller to my DID's hears Asterisk, but pressing DTMF does nothing: On call setup "iax2 debug" shows: ----------------- Tx-Frame Retry[-01] -- OSeqno: 001 ISeqno: 002 Type: IAX Subclass: ACK

Asterisk Users, Has anybody use Voicepulse Connect for Asterisk? I am trying to cover all my bases because in the past, I got burned with poor quality of service, along with failed DTMF tones with 3 different SIP Providers (Vitelity, Broadvoice, and Teliax). I am running Asterisk 1.2.13 on the Debian Etch system, using the SIP protocol. Any insights would be great. Thanks. -John

Does anyone know what happens if you try to have 5 concurrent outgoing channels with VoicePulse Connect? Does it give you an error message or a reorder or something? I'm worried about using them as my primary carrier if this is the case. I noticed that they supposedly only allow 4 channels for free and then you have to pay $20 a month extra per channel. I'm guessing this is for inbound

We are developing an IVR application and when I am testing locally on my machine using a softphone (iaxcomm) the digits I press for GET DATA work every time. I am testing with a local extension that goes right into my routine. However when I try to call in to the system using an analog or cell phone GET DATA drops some digits that are pressed. There doesn't seem to be a pattern to which

I am trying to set up IAX with Voicepulse. When I turn on debugging I get the following message when I call my PSTN number: NOTICE[1142106560]: File chan_iax2.c, Line 4321 (socket_read): Rejected connect attempt from 66.234.228.132, request '3017275115@VPWS' does not exist Any help would be GREATLY appreciated. Thanks, Isaac isaacmcdonald@attbi.com

I'm a bit displeased at the way this happened. I received an email from VoicePulse. Here's some excerpts: ------------------ >We're sending you this important update so you can take advantage of improvements we've >been making to your VoicePulse Connect! service. >We've been working hard on improving the audio quality and reliability of your Connect! >service,

I want to collocate an * box somewhere, where better than where voicepulse chose to put their servers? They probably did their homework and selected someplace where good handoff to the pstn can be found, right/ -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050520/9f5975b8/attachment.htm

Hey all, I am dialing a DID through VoicePulse Connect. The number is answered by a main menu type of IVR. The configuration is as specified in both the wiki and VoicePulses documentation. The call comes through without a problem, but when the caller enter any keys they are either not recieved by * or they are ignored. With SIP I would typically put a dtmfmode= line under the peer and

I have working SIP numbers with broadvoice, and just added a DID from http://connect.voicepulse.com/ . The calls answer, but DTMF is not recognized. With "iax2 debug" active pressing DTMF does nothing. Zilch. Zero. A friend tried a different IAX2 connection, and got the same results. I see the following in the archives: On Fri, 2004-04-09 at 10:12, Robert Jackson wrote: > Hey

I am terribly sorry to bother the list with such generic and bizarre problems, but I have been racking my brain with these for the last week working on it for at least 60 hours. If anyone can even point me in the right direction I would be eternally grateful. So without further adu here are my woes: I have * (2004-04-09 CVS) running on a P4 1.6Ghz CPU, 512MB RAM, Debian "Sarge", and

Until recently, I was using Broadvoice for my in/out calling thru Asterisk. I was extremely pleased to see that Broadvoice was actually passing the callerid info (number and text) that I had set up on each device in my SIP.CONF file. I had PSTN users tell me that they were actually seeing name and extension info when I called them from the Asterisk box. Last week, due to numerous user quality

All: I am trying to use Voicepulse as my incoming line and want the caller to simply dial the extension of the party they want to reach. Here is my problem: - the first time they dial it works fine and I see the following on my console Aug 24 23:14:31 DEBUG[-1126876240]: chan_sip.c:4408 build_route: build_route: Contact hop: <sip:6035057098@66.234.228.137> --

Ok sorry for not being specific. I am having a problem when people outside call in to my number which terminates at VoicePluse then The send IAX to me and I do not get any tones. People press buttons but it just goes to the next dialplan fall through. It happens 60-70% of the time. extentions.conf [general] static=yes writeprotect=no autofallthrough=yes clearglobalvars=no priorityjumping=no

Is anyone else having really bad problems with Voicepulse over the past few days - terrible call quality, dropped calls etc.? Or is it a problem our end? Arrgggh. Makes you want to go back to POTS :-( Simon -- Simon J. Coles President & COO, Amphora Research Systems http://www.amphora-research.com/ EMail: simonc@amphora-research.com Phone: (513) 697-4764

Greetings, I have been experimenting with Asterisk for a few weeks and finally decided to take the plunge and purchase a few DIDs for inbound calling. Our attempts at IAX/IAX2 connectivity with VoicePulse have been less than successful. We get "Registration Refused" errors from Asterisk whenever we launch the server. The front-line support folks at VoicePulse suggested that we are

Which would you recommend as far and quality and pricing to connect to asterisk (including DTMF issues)/ -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050125/bf7bf081/attachment.htm

My goal is to have only 1 primary phone number that can seamlessly "pool" multiple VoicePulse accounts. Let's say I have 3 accounts with VoicePulse Connect 212-555-1000 (primary) 212-555-1001 212-555-1002 When I receive inbound calls on 212-555-1000, I want to "forward" or "roll over" the connection to 212-555-1001 and 212-555-1002 so that the 212-555-1000

I have 1.2.12.1 Voicepulse using IAX I get about 30-40% issues with not having the DTMF tones work. I have 3 questions #1. Voicepulse says they are sending them, Is there some setting I can adjust to make sure my end is working? #2. I have set the Dialplan to play a sound "Operator" then go to a SIP phone. I would like it to write Caller ID Time .... to a file I can read and find

In the absence of "The Definitive Guide to Asterisk Dial Plans" book, I'd like to do something possibly unique with the formatting of extensions in my dial plan, and am having trouble. We use VoicePulse connect, which gives us local DID for inbound and outbound calls (even though DTMF tones are not working in Voice Pulse Connect at the moment). To dial local numbers, you have to

I can't seem to dial out with Voicepulse Open Access service using *. Incoming works fine. Another user posted a few weeks back that they were having problems and there are some threads at dslreports.com about this as well. Maybe someone here can figure out what the issue is from the sip debug info below. I am at a loss. The audible error message from Allison is 0984 (from VP server) Here is