similar to: IP Blue Skinny Client with Asterisk

I have Asterisk up and running and it is working great with my SIP phones. However, I have some "Skinny"-protocol Cisco 7960s. Does Asterisk support the Skinny protocol? I've seen some references to Skinny in the software. If so, should I stick with Skinny with the 7960 or convert to SIP? If anyone has some Skinny confs they would send me I'd be much obliged. If I should

has anyone seen this? -- Starting Skinny session from 192.168.13.102 -- Starting Skinny session from 192.168.13.102 triton*CLI> Oct 15 13:44:05 WARNING[213019]: File chan_skinny.c, Line 2243 (get_input): Skinny Client sent less data than expected. Oct 15 13:44:05 NOTICE[213019]: File chan_skinny.c, Line 2301 (skinny_session): Skinny Session returned: Success Oct 15 13:44:05

hi! i had some good news regarding the cisco 7920 and the internetworking with asterisk (and possibly SIP ?). Status: chan_sccp.so not coredumping anymore :-) Phone contantly in reboot loop [see below] :-( Reboot Loop means: ------------------ Phone auth's with AP Phone gets IP from DHCP & TFTP Server Phone loads OS7920.TXT Phone loads SEP<macaddr>.CNF.XML Phone loads

I assume there are several people on this list that have Cisco Call Manager implementations under their belt.... We are beginning a call manager implementation and the first question I asked Cisco was, should we use SIP or Skinny. Cisco is pushing me towards Skinny, saying that I will lose some functionality with SIP. They also say that most of their customers implement skinny. I see two

I have a few 7960 Skinny phones. I've edited the skinny.conf file, but I'm a little unsure as to how get the phone to figure out which ip address it should register with when it boots. How do I do that? I already have a tftp server for my SIP based phones. Do I need a tftp server for skinny configs at all? And if so, can it be the same tftp server as the SIP ones use (I'm not sure

Can skinny work behind NAT? I have a Cisco 7910 using SCCP behind NAT that has one way audio. The called party cannot hear the calling party who's using the 7910. skinny.conf ; ; Skinny Configuration for Asterisk ; [general] port = 2000 ; Port to bind to, default tcp/2000 bindaddr = 0.0.0.0 ; Address to bind to dateFormat = M-D-Y ; M,D,Y in any order (5 chars max)

Hello, I tried to configure a cisco 7905 IP phone using the skinny channel but I had not much luck. The relevant portion of skinny.conf is: [cisco1] device=SEP000F3487F8E3 callerid="Alex" <123-456-789> mailbox=500 callwaiting=1 transfer=1 context=default threewaycalling=1 line => 500 ; Dial(Skinny/500@cisco1) I set up the tftp server, and prepared the following

Hi All, I'm thinking of creating a new asterisk server using the latest 1.4 stable release to replace my ageing Asterisk SVN-branch-1.2-r7231 (its been a while!). My only concern - my phones are Cisco 7960's (with sccp firmware 7.2 loaded) and to support them better, I remember compiling in a skinny(?) driver to replace the (from what I could tell) basic in built sccp support. After

Hi i have to do the following setup: 1 - i receive a call on skinny protocol 2 - i forward the call to a sip user I think that the skinny phone must be registered on asterisk, in a particular extension, for example: [skinny_internat_ext] 987,1,Dial(SIP/user@host) And if the skinny phone dials 987 i make the call to SIP/user. But how can i do that if the skinny phone isn't registered to

Is there a place where I can find documentation on the Skinny protocol in Asterisk? I did a search, but I cannot seem to find much... I'm looking for information on how to get a Cisco 7960 with the CM image on it to work with asterisk.. Is it support for Skinny in asterisk even mature enough to be able to do this? Thanks, - Andre

At the present time you have to have a VALID ip address in bindaddr for Skinny to work. If bindaddr is either 0.0.0.0 or simply commented out all packets requiring the IP address contain 127.0.0.1. I forgot their nick, but someone in IRC recommended we make Asterisk be smart enough not to pick that interface, but I'm not sure of that is the problem or not. I simply have not had the

Hi, can i set up my asterisk for: - receive a skinny call in a specific context (yes, i have already compiled asteirsk with h323 support) - forward the call to a sip user A - make the sip user B join the call and create a conference between skinny caller, A and B maky thanks

I could use some skinny/Cisco help here. Was finally able to get the phone registered to * but whenever someone tries to call that phone it freezes and reboots itself. Same thing happens when you pick the handset up off the 7960G; it locks and reboots about 5 sec later. Here is what * shows when I plug the phone in: -- Starting Skinny session from 64.72.107.1 Device SEP000F3442E4A7 is

Greetings: I have a working configuration for SCCP on our LANS which doesn't route RTP correctly to a skinny phone behind NAT registering from a remote public IP. Configuration: asterisk 1.4.35 servicing only skinny phones trunked to asterisk 1.2.40 which services chan_phone FXS, zap FXO and SIP phones; both instances of asterisk are behind NAT and run on the same host (using different base

Before I got down the path of converting a Cisco 7960 I have over to SIP I wanted to try and set it up using Skinny. The phone registers ok with Asterisk. When I call a SIP softphone extension on my network the call is made and I can answering it. However no voice is heard over the call. When I debug Skinny on the console after the call has connected I see the following messag: Recieved Alarm

Hi All; Again, the Cisco IP Phones 7942G and using Skinny: I upgraded the firmware to version 8.5 (skinny) and I am using skinny channel (chan_skinny) and the skinny.conf file. The phones are registering, but when we use them to place a call, we only hear tooooooooooo in the handset and we do not hear voice (even when we dial the digits, we only hear toooooooo .. but it dials and destination

If you have been paying attention, you already know this, but this weekend I have spent time ironing out the various details with my chan_skinny code that has been out there, if you knew where to look. I believe I now have all basic features operational and am going to be working on getting the class 5 (hold, transfers, call waiting and caller*id, etc) operational in the comming week(s).

Hi all, I bought a couple phones for really cheap just for a simple solution. I'm trying to get a few 7910 to work with *. I'm just not sure how to get them to work. The 7910 just sits there "configuring IP" Here is a copy of my skinny.conf. the extensions.conf is default. I just want to bring the system up in default before a start making changes. Do I need to make

Hi all, I'm writing my graduation theses : analysis VO-IP protocols , and I cannot find any documents about Cisko Skinny Client Control Protocol. I have Cisco CallManager and some IP-phone and I'm sniffing traffic between that, but I don't understand, how this protocol works. Clearly i'm looking for description of SCCP commands and explanation some basic SCCP scenarios or what

hi All, Sorry to repost but................ I have a server setup that runs sip no problem. I want to try a cisco phone. how do I a) Tell if I have skinny support loaded b) Load it onto a debian system Many thanks