similar to: PSTN incoming - both SIP & H323 always arrive in default context :-?

I just started service with Broadvoice.com and everything seems to work. However, apparently my understanding of incoming sip contexts is less then what I thought it was. Could someone point me in the right direction? (* on a public address, CVS-HEAD-07/12/04, C7960 phones) In my sip.conf I have: [general] port = 5060 bindaddr = 0.0.0.0 allow=ulaw tos=0x18 ;sets ip tos bits (=lowdelay and

Hi Users, Administrators and Pavel Jezek, You prefer chan_h323 from asterisk tree and it's of course that use channels by tree is very good. But in 1.2.x, the chan_h323 is very simple and the chan_oh323 is so bad. And I work with chan_ooh323, that it's too from Digium and work good! And I am Studing one possible change to Asterisk 1.4.x , but in 1.4.x the oh323 channel don't have more,

Hi, Someone released a succefull interconnection in H323 with WTL equipement ? I'm trying to do that with an IPNx. But get dead air. With chan_oh323 it's fine, all works. With chan_h323 => dead air. The configuration is GW to GW. This is my configuration from h323.conf: [general] port=1720 bindaddr=my.ipaddr dtmfmode=rfc2833

Hi All. I'm using RedHat 9 I configured the chan_h323 and asterisk from CVS. This is the scenario SJ_lab_phone(sip) ---------------> Asterisk -------------> H323 GK --------------> PSTN I have tried all codec's and always the same result, the called phone will ring without dropping for how ever I allow it to but as soon as it is answered it immediately gets disconnected.

Hello All, I am trying to setup a SIP to H323 system using SER, Asterisk And GnuGK. Following is the configuration: CISCO ATA (NAT) -> SER -> ASTERISK -> GNUGK My Cisco ATA is registered with SER and When I dial a number, SER forwards the call to Asterisk, and Asterisk forwards the call to the GateKeper. This is ok, call reaches the gatekeeper, however the gatekeeper drops the call

Hi, what's the difference between h323 and oh323 modules? which one should I use? Regards. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20030722/3d3edb73/attachment.htm

The hack below is for OpenH323, not Asterisk. This is not an Asterisk problem AFAICT. I am posting it here so that any other Asterisk user with a similar problem might benefit from it. I may or may not post it to an OpenH323 list, but since both variants of the H.323 channel in Asterisk use non-current OpenH323 versions, it may not be of any benefit to anyone anytime soon if I went that route!

Hi, I'm wondering if there are any plans on adding secondary gatekeeper support to asterisk h323 channel drivers. Also I've noticed that chan_h323 is crashing asterisk at startup if primary gatekeeper is not available. Wouldn't it be a more correct behavior if it doesn't crashing but continue registration attempts in the background? Didn't test it with chan_oh323. Thank you.

I'm trying to compile channels/h323 and chan_h323 from CVS-STABLE, on Fedora Core 3. Firstly, despite the warnings in h323/README, I decided to try using the distro-specific versions of openh323 and pwlib. Of course, the Makefiles in channels and channels/h323 assume that openh323 and pwlib have been specially compiled in $HOME, so I modified the Makefiles to look for headers and libraries in

Is there anyone who is currently using Asterisk as a production H323 gateway? And using which combination of asterisk and H323 (chan_h323, chan_oh323?) The main issue is interoperability with other H323 parties (Cisco AS53xx, Nextone, etc). Searching the mailing list it seems that both h323 and oh323 are not so stable, is it only an impression or using h323 is really not so advisable?

Hi all, i have tried to connect to a clarent gatekeeper. I have used both of h323 drivers chan_h323.so and chan_oh323.so. But no one can register to this gatekeeper. Our ip is activated on this gatekeeper. Maybe, i do wrong anything.... I have only set the "gatekeeper" option in the h323.conf or oh323.conf to the ip address from the gatekeeper. gatekeeper=x.x.x.x But no one of the

Hi all Asterisk Gurus. I am really badly in need of help. Asterisk is very lovely software, but has one big disadvantage.. lack of documentation.But let's get to the point. 1. Is it normal that I get such a crappy quality with iax, some drops and clicks? Could anyone with some similar setup check my quality and say if this is what the people are so excited about? ( I used to work as a speech

Hello, I am moving topic from asterisk-dev list to asterisk-users list. Did anyone succeed receive incoming calls in h323 and orient them to right context based on "host" identification? To summarise, I have quintum Gateway sending call to Asterisk box, and I would like to use asterisk as a protocol converter h323 --> sip. in h323.conf, I have [quintum_gw1] type=user

Hello, I can use directed call pickup using pickup application (between sip, iax, skinny cals), but unable to pickup call that is ringing on phone behind h323 gateway (using original h323 channel in asterisk), is this even suported? thx PJ exten => _*7.,1,Pickup(${EXTEN:2}) console log, when trying o pickup ringing line 324 (h323), from skinny phone (953) -- Executing

Is H323 built into the current CVS? If so, could someone give me an idea of a simple config? thanks, darran -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20030429/fffec1d1/attachment.htm

Hi, I installed H323, however when I make a call from SIP Phone -> Asterisk H323 -> Provider H323 the provider can hear me, but I cannot hear nothing. The asterisk is 1.2.6 with G729 license, and the asterisk is connect direct to internet with a public IP. Any thoughts? -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi all, if i make a call between one SIP soft-phone to an other soft phone over asterisk, i get a Segmentation fault after take up. The extension is : exten => _00.,1,Dial,OH323/${EXTEN}@<myip>|60|r This means, if a SIP client comes with 00* then dial to <myip> over H323. If the H323 client takes up, a Segmentation fault occures. But, if the extension is exten =>

I receive the following error when I try to call another H323 extension from another H323 when going through *. NOTICE[27669]: File channel.c, Line 1325 (ast_set_read_format): Unable to find a path from 1 to 8 NOTICE[27669]: File channel.c, Line 1296 (ast_set_write_format): Unable to find a path from 8 to 1 WARNING[27669]: File chan_h323.c, Line 528 (oh323_write): Asked to transmit frame type 1,

Hi, I use with asterisk gnugk a gatekeeper for h323 client. I don't understand why asterisk can't have the H323-ID (callerID). In the gatekeeper's monitor I have this H323-ID but not in asterisk. Does anyone know something about it, or how can I send a caller ID to asterisk ? Rattana -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hello, I have a strange h323 issue. After executing command "Dial("SIP/333-0d1dfe00", "H323/361737052390920 at ccg|5|tT")" at Oct 18 22:32:23. Meanwile I have sniffing traffic on port 1720. The call was established just at Oct 18 22:33:03 (New H.323 Connection created.) and also packet sniffer grabs the h323 invites at this time also. So my question is what