similar to: Asterisk Integration with Lucent Definity g3 si

Hi everyone, We have been working with Asterisk for a while now and would really like to expand its capabilities by fully integrating it with our Definity g3si and are wondering about other peoples experiences with similar setups. Thus far we have only been able to achieve a partial 1 way integration, but ultimately would love to route inbound voip calls to the asterisk out of the lucent.

Hi Everyone, So I have been further exploring the integration of our asterisk server and our lucent definity g3si system. I took the suggestion of setting up an isdn-pri line added the two way tie trunk and the signalling group, but can't seem to get the PRI signalling working on the asterisk correctly. I've set pri type to network on the lucent, and pri_cpe in zapata on the asterisk, but

I've successfully integrated * to a Definity G3SI PBX via PRI. On calls from the * box to a Definity display telephone a umlaut over an I appears at the beginning of the caller name on the Definity display. Anyone seen this before? Thanks... Bud

What an ACTIVE newsgroup! I'm in the early stages of researching Asterisk. My current environment is a small college (~1000 sets/~400 student sets), Avaya Definity G3si/Seimens Rolm Phonemail. As you can imagine, the maintenance, licensing, and equipment costs are HEFTY. So.. are there any small colleges/universities using PBX or Voicemail? If so, I'd be interested in your migration

Calling all Definity admins, Got a few questions about Definity -> Asterisk interoperability. 1) What are the options for integration? Can I hand off extensions from the Definity and vice versa? 2) Anybody have any working configs they would like to post? I've found and read the legacy integration on the wiki about the two systems. I've also googled and found a few threads that were

Does anyone know how to monitor * to see if they are receiving timing slips on a span connected to a T100P card? I am seeing b-channel restarts quite often and also getting "No D-channels available" warnings from time to time. Yesterday I had all the b-channels crash during a MeetMe Conference. Not good! This PRI is connected to an Avaya Definity PBX that is onsite and located in the

This is my first post, so please feel free to direct me to another list if needed. I am in the early stages of researching Asterisk. I administer a small Avaya Definity G3 switch (~400 users). Can anyone point my to resources/documents/actual implementation notes of using Asterisk's voicemail with an Avaya Definity switch? Many thanks, Brian Hudson --------------

Hi All, We have a Avia Difinity G3R to a Avia EPN connected through 2 dedicated T1 dsics, can I use an Asterisk solution to replace the T1's? If so can anyone give me feedback on what components I should be looking into to help me get started? Thanks in advance, Steve.

Hi List, Merlin Magix hardware v02 I'm trying to get asterisk to act as a voicemail server for a lucent merlin magix PBX that we purchased used. We have 4 FXO channels between the two PBXs on a Sangoma A200 card. The 770 dialgroup is working properly, in that calls to 770 are answered by Asterisk. The magix is sending mode codes in the format #XX#XXX#, where the 2nd block of digits

Does Asterisk work with Lucent or any other PBX phone systems????

Management just approved purchase of a Digium T100P and a T1 card for our Merlin Legend Switch. I will appreciate comments from anyone performing this installation before: - Which T1 card did you use in the Merlin Legend? - Did you require any special interface? (CSU/DSU, etc) - Any items to watch during installation. Also we will need to remove one of our old analog Trunk cards to accomodate

Hey Everyone, Thanks for helping with this integration, I finally got it working! I have inbound and outbound dialing from/to the asterisk box via a pri line! I would definitely like to contribute this information to the wiki so we can fill in some of the information gaps there. In the short term I wrote up what I did and scanned in all of the nescessary screen prints from the lucent into a pdf

Hello, We want to make H323 calls between asterisk and avaya(lucent) pbx. We create node-name,H.323 signaling group,trunk, but we can not make H.323 calls to asterisk. Also no warnings exist in debug. Instead of giving the IP of Asterisk ,i give my computer's IP and run SJPhone ith H.323 GUI. In this time, connection is established. SJPhone accepts H323 calls but Asterisk does not. Do

Yes, I can make a call on that extension from other definity phone, if you mean it. -----Original Message----- From: Ken Godee [mailto:ken@perfect-image.com] Sent: 30 ÉÀÌÑ 2004 Ç. 19:14 To: asterisk-users@lists.digium.com Subject: Re: [Asterisk-Users] Connecting Asterisk and Avaya Definity By E1. Incoming work, but not outgoing Roman Bessyadovskii wrote: > Hi All. > > I connect

You should run the 4ESS protocol ("a" on the Definity command "change DS1 board#) as the Definity may not send Display Name for the NI-2 protocol (settings "b" or "d") Remember to make the Asterisk zapata settings consistent with the Definity. On the Definity trunk group form Page 1, change "Codeset to send Display" to "0 (zero)", also make

Thanks. Is there a way I can log into the Merlin Magix to determine that? How else do I tell? ________________________________ From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Eric Germann Sent: Monday, February 05, 2007 8:16 PM To: 'Asterisk Users Mailing List - Non-Commercial Discussion' Subject: RE: [asterisk-users]

Hey All, I'll be configuring an asterisk box to be the voicemail server to an old Merlin system which had an octel 100 voicemail server that is now dying. My question is simple: do I need to stick an FXO card in the asterisk box? My logic is that if the Merlin Magix system is actually generating electrical current, then I would need to have an fxo card. Is this correct?

Hi All. I connect asterisk and definity by manual at www.voip-info.org/tiki-index.php?page=Asterisk%20Avaya. (I just only have E1, not T1 card). I see, that card work (in definity trunk status, and at asterisk == D-Channel on span 1 up -- B-channel 1 successfully restarted on span 1 -- B-channel 2 successfully restarted on span 1 -- B-channel 3 successfully restarted on span 1

I was just reviewing MAGIX Music Studio, and it advertises that it exports Ogg Vorbis. Does this mean I can have all the benefits of the Ogg Vorbis codec without having to learn how to "do" Ogg Vorbis"? I am simply interested in reducing the size of my standard .wav files. -------------- next part -------------- An HTML attachment was scrubbed... URL:

I am hoping someone could shed some light and point me in the right direction? I'm attempting to get callerid work between an Avaya Definity PBX and Asterisk via TE110P connected via T1/PRI Crossover PRI. From the Definity side I've searched endlessly and came with an example which we modeled as close as we can, but still no luck. While doing PRI intense debug span 1 in I see a couple