similar to: AW: Re: Again: 7920 Cisco IP Phone Skinny & SIP

hi! i had some good news regarding the cisco 7920 and the internetworking with asterisk (and possibly SIP ?). Status: chan_sccp.so not coredumping anymore :-) Phone contantly in reboot loop [see below] :-( Reboot Loop means: ------------------ Phone auth's with AP Phone gets IP from DHCP & TFTP Server Phone loads OS7920.TXT Phone loads SEP<macaddr>.CNF.XML Phone loads

Hi Jan, >the last 2 days i was working on getting the 7920 Phones to work with >Skinny & Asterisk; however no luck (yet). Same here, no joy so far. >Does anybody has a SEPDefault.CNF.xml and a SEP<mac>.CNF.xml handy for >me ? it should be documented at the cisco page, but it isn't :-( The default file should only get requested when the specific file wasn't found.

Hi All; Again, the Cisco IP Phones 7942G and using Skinny: I upgraded the firmware to version 8.5 (skinny) and I am using skinny channel (chan_skinny) and the skinny.conf file. The phones are registering, but when we use them to place a call, we only hear tooooooooooo in the handset and we do not hear voice (even when we dial the digits, we only hear toooooooo .. but it dials and destination

Hi Siggi, > > 7960 and then "Call Ended" on the Display (curious about that !!!). > > That seems to be normal for the 7920. I've sniffed the registration > procedure with Cisco's newest 3.3(3) CallManager (+patches), and it's > doing the same thing. Maybe that's some odd way of testing if the > CallManager ("CCM") really works... >

Hi Siggi/Jan, >If so, there's still a load version conflict (although I've >never seen a >7960 or 7940 care about the version communicated through SCCP): > >On the phone, press "Settings", then 4 for load information. >watch out for the "App-Load-ID". On my 7940, this is >"P00305000300". Yours >is most likely a smaller number... >

Hi, the last 2 days i was working on getting the 7920 Phones to work with Skinny & Asterisk; however no luck (yet). Does anybody has a SEPDefault.CNF.xml and a SEP<mac>.CNF.xml handy for me ? it should be documented at the cisco page, but it isn't :-( I still have the issue that the 7920 spits out "No Service - IP Config failed" but Asterisk is giving me sign that the

Hello I recently get a Cisco 7940G IP Phone and I try to make several things with it and I en counted many difficulties: 1.) I tried to unlock the phone and to set manually IP Address, Netmask, Gateway etc. I don't get any luck. 2.) I tried to upgrade firmware like they said with tftp server... I downloaded: P0S3-08-11-00.zip and I uncompressed the files in tftpboot directory. I don't get

I have Asterisk up and running and it is working great with my SIP phones. However, I have some "Skinny"-protocol Cisco 7960s. Does Asterisk support the Skinny protocol? I've seen some references to Skinny in the software. If so, should I stick with Skinny with the 7960 or convert to SIP? If anyone has some Skinny confs they would send me I'd be much obliged. If I should

Greetings: I have a working configuration for SCCP on our LANS which doesn't route RTP correctly to a skinny phone behind NAT registering from a remote public IP. Configuration: asterisk 1.4.35 servicing only skinny phones trunked to asterisk 1.2.40 which services chan_phone FXS, zap FXO and SIP phones; both instances of asterisk are behind NAT and run on the same host (using different base

Hello, I have tried to install this phone for hours now and I can't get it working. Maybe someone can help me :) I have searched for more info from everywhere but there isn't much about 7910 :( >From the CLI I get this: NAME ADDRESS MAC Reg. State ================ =============== ================ ========== telefon --

Hi there We have a Cisco VOIP environment here, with hard and softphones. I have a softphone account/etc, but I'm a Linux user and (as far as I'm aware) there is no Cisco softphone for Linux. However I can run Asterisk. So I was wondering if there is a way to "convert" a SIP phone transaction into a SKINNY transaction so that the Cisco environment thinks it is a Cisco

Hi, I have one Cisco IP Conference 7935. I'm trying to config the SKINNY Protocol. I config the skinny.conf file same like sample for Cisco 7910. When somebody call me my phone ring and answer the call but I can't hear anything, But the other people is hearing me very good. When I try to call somebody the * show me an error : RECEIVED UNKNOWN

Before I got down the path of converting a Cisco 7960 I have over to SIP I wanted to try and set it up using Skinny. The phone registers ok with Asterisk. When I call a SIP softphone extension on my network the call is made and I can answering it. However no voice is heard over the call. When I debug Skinny on the console after the call has connected I see the following messag: Recieved Alarm

Interesting notes on the 79xx series. The 7920 is the wireless phone; not mentioned here. For a more complete guide to Cisco's phones, see: http://www.cisco.com/en/US/products/hw/phones/ps379/products_data_sheets_list.html The 7902 is the "very inexpensive" Cisco phone, and it looks like it will be SCCP (Skinny) only. Twiddling my thumbs here waiting for the chan_sccp to

Hi All; Can anyone advise if using Cisco IP Phones in skinny protocol is fine or not? Or it is better to use it in SIP protocol? Regards Bilal

hi All, Sorry to repost but................ I have a server setup that runs sip no problem. I want to try a cisco phone. how do I a) Tell if I have skinny support loaded b) Load it onto a debian system Many thanks

Hi, We've just bought a new cisco 7965g and web are trying to connect it to asterisk. I've bought smartnet and downloaded cmterm-7945_7965-sccp.8-3-3SR2.exe cmterm-7945_7965-sip.8-3-3SR2.zip The zip file contains: Archive: cmterm-7945_7965-sip.8-3-3SR2.zip Length Date Time Name -------- ---- ---- ---- 2496963 11-05-07 10:06 apps45.8-3-3ES2.sbn 585536

Hi, I use Asterisk-1.4.22-3 (on Trixbox) and I have a problem with Cisco 7941G with firmware SIP41.8-0-2SR1S (but also with SIP41.8-3-1S), my problem is that Cisco phone isn't authenticated on Asterisk. In tftp directory I have: apps41.1-1-1-15.sbn cnu41.3-1-1-15.sbn copstart.sh cvm41sip.8-0-1-18.sbn dialplan.xml dsp41.1-1-1-15.sbn jar41sip.8-0-1-18.sbn load115 load308 load309 load30018

John Todd wrote.... > Cisco has an 802.11 phone called the 7920, which is apparently > shipping now. It is very expensive (>$550 USD) and only runs SCCP at > the moment, which is Cisco's proprietary VoIP protocol. However, if > it falls in line with some of Cisco's other high-end VoIP equipment, > that means it should have a trailing-edge SIP image running by

Hello, I tried to configure a cisco 7905 IP phone using the skinny channel but I had not much luck. The relevant portion of skinny.conf is: [cisco1] device=SEP000F3487F8E3 callerid="Alex" <123-456-789> mailbox=500 callwaiting=1 transfer=1 context=default threewaycalling=1 line => 500 ; Dial(Skinny/500@cisco1) I set up the tftp server, and prepared the following