similar to: Parking extension not working

Anyone having trouble parking calls? I haven't tried it in a while, but it seems to have stopped working. If I dial 700, I get a invalid extension. I have "include => parkedcalls" in the correct context, and I can dial 701, which tells me no call is parked there. Any ideas? Parking.conf is stock.

Hi! I tried to use Parking Calls I use Asterisk 13, but I can't park any calls and it returns me [Feb 3 16:56:11] WARNING[1693]: pbx.c:12543 ast_context_verify_includes: Context 'ramais' tries to include nonexistent context 'parkedcalls' What is the correct code for put in extensions.conf? Can be this example below? [parkedcalls] exten => 700,1,ParkedCall(701) exten

I have a dial plan that includes a company phone directory as a main menu option. If they just sit at the main menu, after 20 seconds, they are transferred to the operator. If the user picks an extension from the directory, they are transferred to the proper extension. If the called number is not available, they are transferred into VoiceMailMain. They leave a message, and hang up. The hang

When I first to the "add extension" the "show dialplan" has the lines that say "SIP/" but after I do a "save dialplan" and a "stop gracfully" and restart the lines with "SIP/" are gone. ************************ "Show dialplan" before: ************************ asterisk01*CLI> [ Context 'default' created by

Ok, a little patch that adds a little functionality to call parking. With that, you can pickup the older parked call, if many are in the parking lot. The default exten to do that is 750, but can be changed by setting "parkpick => exten" on parking.conf , like [general] parkext => 800 ; What ext. to dial to park parkpos => 801-820 ; What extensions to

Humm, thanks for your reply But whats is the code in parkedcalls context. Please, can you give an example? Thanks very much. 2016-02-03 17:15 GMT-02:00, Richard Mudgett <rmudgett at digium.com>: > On Wed, Feb 3, 2016 at 1:05 PM, Vitor Mazuco <vitor.mazuco at gmail.com> > wrote: > >> Hi! >> >> I tried to use Parking Calls >> >> I use Asterisk

I am having trouble getting park to work with SIP, I have these config files: /etc/asterisk/parking.conf [general] parkext => 8540 parkpos => 8541-8555 context => parkedcalls parkingtime => 45 /etc/asterisk/extensions.conf include => parkedcalls include => default [default] exten => 3874,1,Dial(SIP/3874|20|tT) Do I need something else somewhere? Is anyone using park and

I am using Polycom 501s with asterisk 1.2.4. When transfering to call parking wih "#1" -> 700 the user is able to hear asterisk tell him what extension the call was parked on. However, when I press "transfer" -> blind -> 700 . The user is not able to hear what extension the call was parked on. It seems like the polycom is hanging up before asterisk is able to

Hello, Recently we have been using asterisk 1.6 and everything worked ok, all our productions server are 1.6. Recently we have upgraded one to 1.8 and multiple parking call are not working, which worked pretty ok on asterisk 1.6. Are there any major changes in asterisk 1.8 related to park call and multiple parking lots. Bellow is my config from asterisk 1.6 which worked, I`ve tried this in 1.8

Greetings all. First off, thank you for your time on this. I have spent literally 12 hours searching every forum and article I can find, and I'm going cross-eyed, so I need to bother everyone with this. I am running * 1.2.37, and I am trying to get the hints working, so I can turn one of my SPA962's LED's red when someone parks a call. I have used Button #3 on my SPA962 to

Hello, all. With the assistance of very helpful folks, our brand new multi-tenant setup seems to be working smoothly from start to finish with just a bump or two. The biggest is parking. Now that we got most kinks worked out, I'm a little more comfortable in trying to resolve this. There seem to be two problems: 1. Parking assigns parking spaces from the default group no matter

Hi, I'm having problem with call parking. When I park call, either via transfer to xten or park digit sequence from features.conf, I hear the parking lot number read to me and the user gets transferred. However, MOH stops for the caller the moment user is transferred. The user can be retrieved by dialing the parked extension and voice resumes. If the parked user hangs up, the channel state

So, I can't figure out how to get the parkandannounce application to work the way I want it to... I have cisco 7960 IP phones using SIP, and this is what I have in my extensions.conf: exten => 700,1,ParkAndAnnounce(pbx-transfer:PARKED|90|SIP/${EXTEN:1}|internal,${EXTEN:1},1) exten => 700,2,Hangup and in my parking.conf: [general] parkext => 700 ; What ext.

Hello, all. I'm having a deeply frustrating time getting multiple parking lots to work and am wondering what I am doing wrong. I am using Asterisk 1.6.1.1. I defined two separate parking lots in features.conf as follows: [parkinglot_a100] ; SSI context => a100-parking parkpos => 900-920 findslot => next [parkinglot_a10] ; EBC context => a10-parking parkpos => 800-820

Hello, I was running a very simple test setup with * HEAD 7/15/2004 on Fedora Core 2 and things were working fine. Today I upgraded to RC1 and my asterisk service will no longer start. I downloaded the tarball, extracted, ran 'make', ran 'service asterisk stop', ran 'make install', removed all files in /etc/asterisk, ran 'make samples' and then ran 'service

We're using Grandstream GXP-2000 with programmed buttons to the first 5 parking lot extensions. When a call is parked, whichever parking lot extension it's parked on lights up red. We've never used the "announce" part and I'm wondering if there's an option I can't seem to find to disable the announce so the transfer happens faster. Thanks for any help, Ken

Hi list, For months everything worked super here in our setup. This week I implemented some new idea in our webbased calendar system. I thought it would be nice to have an option that tells asterisk you are not available for calls during an appointment. For this to work I could no longer use the ringgroup setup: Dial(SIP/10&SIP/11&SIP/12,40,tr) So I thought, why not use the Local channel

Does anyone know why the bt100 cannot park and pickup a parked call? attendant announces the call is parked at extension 701 but the call cannot be retrieved by any other phone. also, the bt100 constantly rings when the phone is hung up after parking. anyone experienced this? using the basic features.conf [general] parkext => 700 ; What ext. to dial to park parkpos =>

My company for various reasons has asked that I come up with a way to have previously parked calls be re-parked in the same parking slot. I have looked at setting up asterisk so that the receptionist chooses which slot to place a call, but I think there is an easier way. That is when I came up with the idea of "Sticky Park". Here is how it would work. A call would come in and

Hi all. I am trying following scenerio for call park & pickup. voice is flowing established between B & C, after call-pickup ( instead of A & B ). can anyone please clarify why it is happening like this, ( or ) do i need some more configuration for park&pickup ? A B