similar to: Oops!

Just curious if any of the Asterisk installers are doing anything special to protect themselves from a possible lawsuit caused by 911 failure during a Asterisk/computer crash? I realize that any traditional PBX or even a phone line can fail but, anything running on a computer is probably going to be less reliable than most PBXs. Anybody requiring customers to acknowledge and sign any kind of

Hi! I am new to Asterisk too, I got the similar problem and I would like to know how to get * to work behind NAT. When I have the SIP Debug turn on, I got the error 479 from FWD when * try to register with FWD, it looks like * is using the local IP (192.168.x.x) in the Contact field. I have put the nat=yes in the [FWD.Pulver.com] content, but it does not seems to make Asterisk aware the

I am just starting to deploy asterisk in our office to use as our primary phone system - we plan to use a Voicetronix OpenLine4 card as our PSTN gateway - but one thing at a time... haven't got that far yet. Currently, i'm trying simple IP to IP calls within the office using our Cisco 7960's phones running SIP. When I make a call between these two phones, the conversation is of a

-----Original Message----- From: asterisk-users-admin@lists.digium.com [mailto:asterisk-users-admin@lists.digium.com] On Behalf Of empire underground Sent: Friday, January 09, 2004 1:32 PM To: asterisk-users@lists.digium.com Subject: [Asterisk-Users] Screen Pop & Remote Agents > can I put a .csv file in the sql DB and have it dial from there? and will I be able to set a > Dial Plan to

Hi, i am recording a message, but it is always cut off at 40 secs. There are no time out configured. Gabriel -- The educated person is not the person who can answer the questions but the person who can question the answer.

I have set up a couple of test Asterisk servers and have never had a problem with sound. I've just done a fresh install on a dual 1GHZ PIII Asus box running Fedora Core3 with the Digium PCI Dev kit and following all the various Core 3 How-To's. I can make calls ok but when any sound is sent from the Asterisk box such as voice prompts and music on hold the sound is completely chopped up in

<P>hi everyone,</P> <P>I know this issue has been raised many times before, i think still the problem remains. When a call is made through a Zap channel, whether it is actually made or not (irrespective of whether, engaged, busy, or actually answered), asterisk logs it in CDRs as a call made. This makes it impossible to do an accurate billing. Has anybody found a way to overcome

Forwarded back to the list so others might get the benefit of the answers, and I get fact checked by others. -------- Forwarded Message -------- > From: Lee <leeb00@gmail.com> > Reply-To: Lee <leeb00@gmail.com> > To: Steven Critchfield <critch@basesys.com> > Subject: Re: [Asterisk-Users] udev or not? > Date: Fri, 10 Dec 2004 13:00:29 -0800 > On Fri, 10 Dec 2004

Supposed scenario: one PC(2GHz CPU), one card 4E1, and one Internet link. There is somebody he know (has experienced) how many concurrent call (Classical Phone->Voip) can handle Asterisk ? Thanks ! -- ______________________________________________ http://www.linuxmail.org/ Now with e-mail forwarding for only US$5.95/yr Powered by Outblaze

hi guys, do you have any suggestions on how to connect 2 TE410P via E1? (for simulation and testing purposes) asterisk1 --> TE410P ----> ? ---------> ? ---->TE410P -->asterisk2 -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20030907/698cd499/attachment.htm

We have 1000's of Remote Call Forward #'s across the USA / Canada, which forward into 1000's of 800 #'s in our call center. Is it possible to automate a solution where Asterisk could dial a given number, record the first 3 seconds of the call, save it to disk, and then go on to the next number, and just do this all day long ? We need to regularly check that the numbers work, for

Why does this person have my e-mail address ? ----- Original Message ----- From: <markogift@astriholics.org> To: <hackerwacker@cybermesa.com> Sent: Tuesday, November 23, 2004 1:13 PM Subject: Gift for Mark Spencer > Hello everyone! > > We have been thinking about something that we could do for Mark > Spencer as a holiday gift. We have decided to try to orgranize a

Can T400P be configured for nfas (one d-channel providing signaling for more than one span)? Thank you. Alex Zarubin -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20030522/f2b637a9/attachment.htm

Has anyone thought about an ISO file that could be used to make a CD for a bootable install for a "basic" Linux/Asterisk system? Just re-boot and config. -- James Taylor jltaylor@metrotel.net 903-793-1953 --

Does anyone have any general tips on how to get programs to work on Wine? I hear lots of success stories for various programs which I have failed to get working on my own machine. But then again, my own version of wine is a bog-standard installation without any special adjustments made to it. What are the steps usually taken to attempt to get a program to run under Wine? Or is that too

Hello, I am not great at figuring out compilation problems - usually I just curse and give up. Trying to compile Wine from binaries I get the following error, anyone knows what's wrong and can offer some help on how to get it to work? (the stuff at the top was cut out to save space) ----- make[2]: Leaving directory `/share/Emulators/wine-20010305/tools/specmaker' cd `dirname

With the increased traffic as of late, I'm wondering if it is time to split the list again. Specifically I am wondering if it should be split along the various VoIP protocols and zap hardware, then leave a general list that does configuration other than VoIP related? The hope is that those asking SIP or H323 questions could get help from the various supporters while the main list can deal

Will M$ ever stop!!.. Whats the bet their telecoms products will use non-standard protocols.. I really wouldn't like to run a telecom system on Windoze in the first place.. Full Story.. http://news.zdnet.co.uk/communications/0,39020336,39117099,00.htm

Greetings, I am running Asterisk with a T100P and a Zhone channel bank for over a month now. For the most part it works fine but from time to time (about once a week) the system will not let go of a line and will play the greeting over and over. Anyone calling gets a busy signal. If I reset Asterisk everything works fine. Has anyone seen this problem before and fixed it? If so what did you do?