similar to: Strange Call waiting problems - SNOM 200 & Grandstream Budgetone

Hello guys, I ask you to share your experience with your BudgeTone 100.... I have my asterisk @ work and I've bought a GrandStream BudgeTone (SIP phone) and I usually use X-Lite I have plugged my BudgeTone into my home network because I want to be called even at home. I succeed to register my X-Lite with Asterisk from home but I can't do that with my BudgeTone. (I don't know

I am setting up a small Asterisk system for use at home. I have one Budgetone 101, one Cisco 7960 and two Xten lite softphones. So far everything is working expect for an issue with the Budgetone. When a call is placed between the Budgetone and any other phone, the call is setup and sounds good. If I hang-up on the Budgetone, everything is ok. If I hang up on the other phone, the Budgetone

Hi, I am thinking about getting some of these phones to use with my Asterisk system.. So I would be interested to hear from the people who have tired and tested these phones.. What is the voice quality like using alaw/ulaw or G.729?? Are there any problems getting them to play nicely with Asterisk?? How sturdy is the construction (reciever, handset, buttons, cable connections, etc..) ?? How

I bought three plus two Grandstream BudgeTone 101 phones. The shipping cost more than the phone itself from Pulver store. The first shipping had one phone defect. Nothing on the display. (Can happen!) The second shipment had one phone with a defect display, but it still worked. The second phone's handset was defect too (microphone did not work). Changing the handset from this one to the

Does anyone know what the Grandstream Budgetone is going for $$$ in the US? I didn't immediately see pricing on the phones page. AJ

Symptom: Phone after about 15mins will stop functioning Problem: DHCP lease renewed but default route dropped Fix: Assign a static ip and problem is resolved. Upgrade to new firmware once it is released It turn's out that these phones have a few issue in 1.0.3.81 firmware. The phone may stop transmitting packets if configured with DHCP, if DHCP is being provided by certain devices. Netopia

Is anyone using this combination successfully? I have a dell 500sc running rh9 and asterisk 1.0rc1. It is configured with an x100p. I have a Sipura SPA-2000, laptop with Xlite and a Grandstream Budgetone BT-101. I have signed up with Voipjet (they use iax2). I also have an FWD number via iax2. I can sucessfully call back and forth to all devices via zap, sip, and fwd. I can successfully

Like many others on this list, I had been experiencing periodic lockups with my Grandstream products (Handytone 286 ATA & BudgeTone 101). The lockups consisted of seemingly dead devices, no dialtone or response, until I power cycled via software or hardware. The workaround had been to reboot the device every 30 minutes with a cron job. I contacted Grandstream and although they didn't

Just to toss in my very limited experiences with the Grandstream phone-- I haven't tested it enough to really know nor is my Asterisk config set up enough to fully try all the features. Mostly, it just works. It was very easy to configure and get running. I've been toting it around to clients as a show and tell exhibit and it has helped get people excited about the possibilities. Voice

I have two problems with Asterisk and my Budgetone 100s. 1. Sometimes when outside callers dial my Budgetone it will ring twice, then the caller will receive a busy signal. This happens intermittently and I cannot pin down the circumstances of when it works and when it doesn't. Asterisk logging doesn't give me too much info when this happens: *CLI> -- Executing

Hi there, I'm having problems with the Grandstream Budgetone 101 on hangup - "show channels"/"show channels concise" output is still showing the call's channels as active. The problem does not exist when I use SJPhone, so I'm assuming it isn't an Asterisk configuration issue. Has anyone seen this, or better, does anyone have a fix? :) Thanks, David. --

Maybe I'm loosing my mind but I've just noticed that if I put a call on speakerphone and I press speakerphone again it hangs up the call, you would expect it to take the call off speaker back on to the hand piece. I'm using V 1.0.5.22 firmware. Is there any other way to turn off speakerphone I'm missing? Cheers, Dean -------------- next part -------------- An

Has anyone seen/dealt with the Grandstream BudgeTone-100 producing double dialing with asterisk? Thanks JDT Example: (password input = 101) -- Playing 'vm-password' -- Incorrect password '11001' for user '101' (context = <any>) -- Playing 'vm-incorrect' -- Playing 'vm-password' -- Incorrect password '110011' for user

I have a client using a Grandstream Budgetone 102, but he is unable to register to my Asterisk server. About every 20 seconds, I get the following messages: Aug 11 11:27:17 DEBUG[1087740720]: chan_sip.c:748 __sip_autodestruct: Auto destroying call '3b4b68ec48200ab9@192.168.xxx.xxx' Aug 11 11:27:19 NOTICE[1087740720]: chan_sip.c:7336 handle_request: Registration from

Hello, I have been working on getting Asterisk up and running with a couple Grandstream hard phones (Budgetone 100s) and a couple softphones. Things work pretty well but we have discovered an odd problem. A calls B and then A can put the call on hold and pick it back up. A calls B and B can put the call on hold but cannot pick it back up. These tests are internal on the hard phones. The

Hello! I am considering mass deployment of Budgetones 102. According to their website, remote provisioning (configuration via TFTP) is possible. Anyone has experience with this? Is this really working?

Hello, I have a problem with asterisk and Grandstream BudgeTone-100. With default configuration everything works (in anonymous mode and fixed IP), but if Im trying to enable registering, it dos not work. I used 'sip debug' and verbose level 10, nothing happens if I switch telephone on (no messages about bad auth etc). As I understood, after switching phone on at first it will try to

I've looked through the archives - and see questions similar to mine, but no answers. What, if anything, can be done to get the incoming Caller ID to be presented on the Budgetone's Caller ID display? In all other respects the phone+Asterisk seem to be extremely happy with each other.

After reading about these $75 SIP phones on this list, I purchased a couple for evaluation. They do work with asterisk - and are good value for money, but as somebody commented: they are not yet perfect. I just wondered if anybody had managed to get either the message-waiting indicator or the conference button to work? Phil Skuse <phil.skuse@vicorp.com>

Hi, I'm considering giving the Grandstream BudgeTone-102 phones a try. I've been using Cisco 7960's to date, but the low cost of the Grandstream phones are hard to ignore. I have two questions: 1) Does the message waiting indicator on the BudgeTone's work with Asterisk? 2) The one line 12-digit LDC concerns me a bit. Is the LCD able to display both the CID number and name on