Displaying 20 results from an estimated 100000 matches similar to: "* and Cisco 7910"
2007 Feb 19
0
Cisco 7941/7961 w/Firmware 8.2.1 and NAT
Hi all,
I have a bunch of Cisco 7941's with SIP firmware 8.2.1 that work great
on a LAN with Asterisk 1.2.x but fail miserably when trying to use them,
through NAT, with a public Asterisk server.
We have a bunch of Polycoms and Aastra phones that work great with NAT
so I'm very familiar with NAT and Asterisk but not so much familiar with
the Cisco phones although we did get them to work
2005 Mar 27
1
[Asterix-users] CISCO 7910
Hi everybody !!! I'm a french student working on an Asterisk's projet . I
think it's very easy for you :
configure 2 CISCO 7910 and Asterisk in order to make call between both.
(Scuse for my poor english ;) )
I have install Debian and Asterisk thanks to the CD Xorcom Rapid.
I have set-up DHCP and TFTP servers for the IP phones.
On the tftp, i have put the *.bin files for my phone,
2008 Jan 16
1
Asterisk Now Beta 6 and CISCO IP 7910
Dear All,
Thank you for taking the time to read my message. I have just installed
Asterisk Now, and it seems to be up and running with no issues on my system.
The problem I am facing, is that I cannot find anywhere in the web
interface, to assign phones. I have a CISCO IP phone 7910 series, and I wish
for this to connect to the asterisk box. What's the best way of going about
this?
2006 Mar 29
0
Installing Cisco IP phone 7910
Hello,
I have tried to install this phone for hours now and I can't get it working.
Maybe someone can help me :) I have searched for more info from everywhere
but there isn't much about 7910 :(
>From the CLI I get this:
NAME ADDRESS MAC Reg. State
================ =============== ================ ==========
telefon --
2004 Sep 28
1
Newbie 2 PBX VOIP, protocol ?'s using Cisco 827 7910
I am replacing a dead pbx with *. There are four lines I will be using.
There is a Cisco 827-4v already in place so I will move the lines from
the pbx to it.
I am working with Cisco 7910 phones and I understand they use the
Skinny/SCCP protocol. I am not sure if I should use chan_skinny or
chan_sccp?
However my main question is with communication. Do I need to use the
same protocol between the
2004 Jan 13
1
cisco 7910 phone
Hi All
Will cisco 7910 ip phone compatible with Asterisk? I know that 7960 are
fine.
David Kwok
-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/x-pkcs7-signature
Size: 1878 bytes
Desc: S/MIME Cryptographic Signature
Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20040112/e8023f35/smime.bin
2008 Mar 02
0
Cisco 79xx users/consultants, 7970G color in particular share information (was: Re: asterisk-users Digest, Vol 44, Issue 3)
The documentation of how to use the 79xx series' phones and features
with Asterisk is really hard to find and put together. The higher end
phones like 7970 are more like converged PC+phone, a thin client to
telephony and network apps. But it's really hard to target it as a
development and deployment platform because the docs and techniques are
so obscure.
There seems to be a fair amount
2008 Jan 18
0
Cisco 7910 Handsets: Skinny protocol?
Dear all.
I have about 30 Cisco 7910 handsets, and my basic research has told me that
they are not SIP based handsets. Not to worry for now, I just need them to
connect to my asterisk server. They are giving me a bit of a hard time. Has
anyone here had any experience on how to do this? Documentation on the
internet is seriously lacking.
Best regards,
Mr Gabriel Ogunleye
IT
2007 Mar 29
3
Re: Problem converting a Cisco 7960 to SIP
Hello all,
I've got myself into a bizzare situation that I can't seem to get myself
out of... Was wondering if anyone had some advice that might get me 'over the
hill' on this...
Some background: PBX consists of an Asterisk box (running TrixBox), 4 Cisco
7960's, 2 Polycom IP500's, and now an additional Cisco 7960. The phones are
all on a separate LAN. There is
2006 Dec 07
1
Asterisk 1.4 + Cisco 7970
Hi All,
I recently received my Cisco 7970 and have it up and running with
8.0.4 firmware, with asterisk 1.4. Seems to function pretty great so
far, aside from a few issues.
Here is what I have noticed so far, anybody have any fixes for these issues?
1. Contrary to the forums and lists I've been reading - the phone
indeed does register. The
little registration animation stays on the screen
2005 May 12
6
Cisco contract for 7940/7960 firmware access
Maybe not the place for this but thought I'd post the info for others. I
purchased a cisco 7960 off ebay and needed to convert to SIP for *. I
know * supports SCCP but I wont go into that here. I'd read on
voip-info.org that a contract could be purchased for approx $8 to allow me
to download the firmware. I though, being in the UK, i'd get one through
a reseller in the UK.
2005 May 17
1
Obtaining Cisco Firmware painlessly?
Hi Everyone!,
I'm not sure if my previous request went through or not...It got
returned as not-deliverable??? Who knows!
Anyway, I need to get hold of the Cisco Firmware to upgrade a 7910G to
sip.
I know it can be a real pain in the butt getting hold of the firmware,
so any help in obtaining it relatively fast and painlessly would be much
appreciated.
Cheers
M.
-------------- next
2005 Jan 21
0
Cisco 7960 can't make/receive calls
I've got three 7960s running v6 SIP firmware. My Asterisk setup has
worked fine with grandstream devices, and basically, we're just
upgrading to use nicer phones.
Whilst I can make/receive calls from the 7960 to/from gossiptel).
When I try to place a call, I get the following
Jan 21 11:09:23 NOTICE[19688]: chan_sip.c:7271 handle_request: Failed to
authenticate user "30"
2007 Jun 25
1
Asterisk 1.4.5, Cisco 7960, call dropped when sip client put on hold/transfer
Hello,
I've been racking my brain over this for much of the day so I thought
the list would probably be more helpful. A few days ago I upgraded
from Asterisk 1.2 to Asterisk 1.4.5. Everything appeared to be working
properly.
However, on the first business day, we realized that when transferring
calls (not using call parking, using the built in transfer buttons on
a Cisco 7960) would not
2003 Dec 23
1
Cisco 7914 Expansion Unit (for 7960G IP Phone) & Help With 7960's Speed-dials
Hi,
Has anybody been successful in running the 7914 expansion unit for the
Cisco 7960G IP phone? For anybody unaware of what the expansion unit
does, it provides 14 additional buttons, with an LCD display. The idea,
is that with an expansion unit (a 7960 can take upto 2 of these units),
a user can either assign more speed-dial's, or can monitor line
status/account status. So, you can
2004 Jan 02
2
Cisco SIP license?
In order to use a cisco phone and the SIP image, do you need a license, or
just the firmware.
Is this like saying that you can get music, all you need is something like
kazza? Or if you get the phone and the image are you legit?
What does it take to get the lic?
Josh
_________________________________________________________________
Get reliable dial-up Internet access now with our
2009 Oct 22
1
Can't configure Cisco 7942 avec factory reset
Hi,
(I think) I followed instructions here (
http://www.voip-info.org/wiki/view/Firmware+issues+on+7940+-+7960 section
"Notes added Nov 2005, revised May 2006:"
at the bottom of the page) to factory reset a Cisco 7942 I wanted to
configure to SIP firmware.
When booting, I can see this requesting and obtaining file
term42.default.loads from TFTP server.
Then it would send a request
2003 Jul 16
0
Cisco 7910 compatibility
Hello,
I'm looking at getting some Cisco 7910G+SW phones through a local
liquidator.
Is anyone currently using these with asterisk?
Any special limitations with this one as compared to the 7940 and 7960's?
Will they work with SIP or are they stuck in Cisco-land with Call-Manager
only?
Thanks,
MATT---
2008 Dec 19
2
hardware needed for OCFS
Hi,
Does OCFS require NAS hardware to run or does normal PC hard disk work?
Thanks,
Pete
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://oss.oracle.com/pipermail/ocfs2-users/attachments/20081219/1bc9110b/attachment.html
2009 Jan 19
1
Cisco 7941G-GE with Asterisk and CTPSEP odyssee
I have just got a Cisco 7941G and am experiencing the exact same
problem (phone is requesting .tlv file from TFTP server and never asks
for .cnf.xml file). The phone originally had SCCP on it, but I
downloaded and flashed with the latest Cisco SIP image (8.4(3)
released 2009-01-13). In reading your message below, it looks like you
were going to try an incremental upgrade?did you have any