similar to: Beginners Question

Using DIAX softphone which seems to be working OK can get to VM/echotest etc in the demo context Am trying to setup FWD but get the following problems Can hear it ringing when dialing FWD no 612 for time. Connects but no sound from remote end. Does anyone have any suggestions. Softphone on 192.168.0.2 asterisk on 192.168.0.3 Netgear RP114 doing NAT to the internet port 5060 being forwarded to

Hi, I've compiled Asterisk cvs stable (few days ago) unde Suse 9.2 without any problems. We're using te110p and wcte11xp module that is autoloaded by Suse 9.2. Card goes green after reboot, but this meesages appear in logs: Mar 22 11:28:51 linux kernel: Zapata Telephony Interface Registered on major 196 Mar 22 11:28:51 linux modprobe: FATAL: Error inserting torisa

Hello all After install the Asterisk, setup the configuration file in the sip.conf and extensions.conf and type "asterisk" with start program. I don't have line card yet. But I found following error in the /var/log/messages. localhost insmod: /lib/modules/2.4.18-5/misc/torisa.o: init_module: Input/output error localhost insmod: /lib/modules/2.4.18-5/misc/torisa.o: insmod

/bin/sh: -c: line 0: syntax error near unexpected token `;' /bin/sh: -c: line 0: `if [ -n "" ]; then if [ -f ]; then mv -f .bak ; fi; cat .bak | grep -v "alias char-major-250" | grep -v "post-install torisa /sbin/ztcfg" | grep -v "post-install wcfxsusb /sbin/ztcfg" | grep -v "alias wctdm" | grep -v "post-install wctdm

Looking at my log file I found the following error: May 2 12:00:45 debian kernel: Zapata Telephony Interface Registered on major 196 May 2 12:00:45 debian kernel: No ISA tormenta card found at d0000 May 2 12:00:45 debian kernel: Zapata Telephony Interface Unloaded May 2 12:00:45 debian insmod: /lib/modules/2.4.20-8smp/misc/torisa.o: init_module: Input/output error May 2 12:00:45 debian

(I'm producing a writeup on all the things one run into building an * box. Which after a couple of boxes is showing up aplenty.) So this uses the working h/w and config's from another box. All I do is build in a new computer. Loading the modules I got: __________________________________________________ Zaptel Configuration ====================== Channel map: Channel 01: FXS

Hello - any help is greatly appreciated. I am trying to compile zaptel on debian 2.4.26-1-386. I have a single X100P card installed. When I run '/usr/src/zaptel/make clean;make install' I get the following: depmod: *** Unresolved symbols in /lib/modules/2.4.26-1-386/misc/torisa.o depmod: *** Unresolved symbols in /lib/modules/2.4.26-1-386/misc/zaptel.o /sbin/depmod -a depmod: ***

?Hola! torisa.c (from zaptel 0.50) says: #define MASTERVAL 0x41 /* Enable E1 master clock on Rev. B board */ Does that mean that there is a torisa revB? If so, are the schematics downloadable from somewhere? (www.zapatatelephony.org only has Rev. A ones) Does the Rev. A support E1? (just changing the DS2151 for DS2153, the DS crystal and closing the E1 jumpers, or something else is

It's nice to be able to define the list of asterisk modules we want to load from the /etc/sysconfig/zaptel file rather than directly in /etc/init.d/zaptel. I'm using nufone and don't require anything but the ztdummy (is the rtc-based module better, anyone?), so that's what I've put here. These are based on zaptel-1.0-RC1. John --- zaptel-1.0/zaptel.init.ole

Hi List, I am having some trouble with installing the latest version of ztdummy on a CentOS Kernel 2.6 system. I have installed a few Asterisk systems on Slackware Kernel 2.4.x without any issues, unfortunately there is no choice about this distro, or kernel as it has been preinstalled by someone else. And so I am in the dark with an unfamiliar distro and kernel. I am fairly sure the

i have error in install module of tor2. but it compile good. what happen ? ivr2:/usr/src/zaptel # make clean; make install rm -f torisatool makefw tor2fw.h rm -f zttool rm -f *.o ztcfg tzdriver sethdlc rm -f zonedata.lo tonezone.lo libtonezone.so.1.0 *.lo rm -f gendigits tones.h rm -f libtonezone* rm -f tor2ee rm -f core cc -I. -O4 -g -Wall -DBUILDING_TONEZONE -DSTANDALONE_ZAPATA -c -o

Hi guys, Thanks for your answers on my two questions yesterday. That's exactly what I was looking for, sorry for not noticing it myself, but I'm still getting acclimated to Asterisk and even Linux--from what I see so far, I love it. I've got another one now. Since my Asterisk install and configuration is fairly stable at this point, I'm interested it ensuring that during

Hi there, my * has no Zaptel or Tormenta hardware at all, also no ztdummy. However dmesg is full of Zapata Telephony Interface Registered on major 196 No ISA tormenta card found at d0000 Zapata Telephony Interface Unloaded and /var/log/messages shows tons of this: Nov 25 21:28:28 localhost kernel: Zapata Telephony Interface Registered on major 196 Nov 25 21:28:28 localhost kernel: No ISA

Hi folks. I am using a X100P card and after some random amount of time of correct operation, say 8-20 hours, the card starts acting up and producng horrid sound quality which is all broken up. All other channels appear to work fine. One thing I noticed, is that "zap show channel 1" always shows the "Actual Hookstate: Offhook" as soon as the telco line is plugged in. Is this

Ok so I read the Linux 2.6 related README and finally compiled propperly, I thought but at the end I notice that lscpi does report the cards, but I cant modprobe wcfxo nor zaptel and I do have wcfxo.ko in the /lib/modules/2.6.8/extra/ directory, so what gives? This is a Debian Sarge, thanks! # # make clean starts here # make[1]: Entering directory `/usr/src/zaptel-1.4.0/menuselect' rm

Hi, i can't compile the latest svn update from zaptel: /lib/modules/2.6.14-1.1653_FC4smp/build make -C /lib/modules/2.6.14-1.1653_FC4smp/build SUBDIRS=/usr/src/zaptel modules make[1]: Entering directory `/usr/src/kernels/2.6.14-1.1653_FC4-smp-i686' CC [M] /usr/src/zaptel/zaptel.o /usr/src/zaptel/zaptel.c:6193:5: warning: "CONFIG_ZAPATA_DEBUG" is not defined

Thanks in advance root@asterisk01:~# modprobe wcfxo /lib/modules/2.4.20/misc/wcfxo.o: init_module: No such device /lib/modules/2.4.20/misc/wcfxo.o: Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters. You may find more information in syslog or the output from dmesg /lib/modules/2.4.20/misc/wcfxo.o: insmod /lib/modules/2.4.20/misc/wcfxo.o

?Hola! I'm trying to understand the torisa design and i'm mistified by the upper part of the third page (generation of ALE and DWR from MEMWR and CS2..5) Can somebody explain me how the magic there works? Why can't just do ALE = ~(CS3 | CS5) and DWR = MEMWR ? (DS app note 326/452, "DS2141A, DS2143, DS2151, DS2153 Interfacing to a Nonmultiplexed Bus", at

I'm trying to figure out how to start *..... Rh7.3,CVS,TE410P,TA750 If I just try the way the docs spell it out "/usr/sbin/asterisk -vvvc" it fails...... /var/log/asterisk/messages Oct 3 22:23:34 WARNING[1024]: File chan_zap.c, Line 610 (zt_open): Unable to open '/dev/zap/channel': No such device Oct 3 22:23:34 ERROR[1024]: File chan_zap.c, Line 4930 (mkintf): Unable

Group Following the information located on http://www.asterisk.org/index.php?menu=download I get the following error installing the zaptel Any help would be great!!! Thanks [root@VoIPGW zaptel]# make clean; make install rm -f torisatool makefw tor2fw.h rm -f zttool rm -f *.o ztcfg tzdriver sethdlc sethdlc-new rm -f zonedata.lo tonezone.lo libtonezone.so.1.0 *.lo rm -f *.ko *.mod.c .*o.cmd rm