similar to: pridump

Hi, Does anyone have some experience with Nokia 32 Terminal (it is an analog GSM Gateway)? After a configuration I can make only incoming calls, I'm not able to do any outgoing. Nokia signalize an error (4 short tones), when I try to phone someone. I tried postpaid simcards as well as prepaid simcards with the same result. Does anyone try to connect this gateway to Asterisk PBX if so what

I do 'make pridump' from the libpri source directory and receive the following: # make pridump cc -o pridump pridump.o -L. -lpri -lzap -Wall -Werror -Wstrict-prototypes -Wmissing-prototypes -g /usr/bin/ld: cannot find -lzap collect2: ld returned 1 exit status make: *** [pridump] Error 1 I am new to all of this, so I am sure I am missing something obvious, any help will be appreciated.

Hi, I'm trying to build a call center application that allows attendants to come in the morning and dial a certain extension to make their extension available. I wouldn't like to use the AgentLogin app because their line would need to stay off-hook (is this correct?) Is there any SET channel status command that would allow me to do something like this? PauloHM -------------- next

Hi, I'm having random hangup problems with zap channels. If I turn busydetect off in Zapata.conf, * fails completely to detect a user hangup in the middle of a script. On the other hand, if I turn it on, everything works much better, but long calls tend to be hung up without a motive. Any other parameter that I can try? Any #define that I can tweak and recompile? Will callprogress

Count me in too. -----Original Message----- From: sip [mailto:sip@intology.com] Sent: Friday, October 17, 2003 1:56 PM To: asterisk-users@lists.digium.com Subject: Re: [Asterisk-Users] Beta testers for visual configuration tool for asterisk count me in ----- Original Message ----- From: "Paulo Mannheimer" <paulohm@instant.com.br> To: <asterisk-users@lists.digium.com>

Hi All, We've been developing for a while an IDE for Asterisk, and the time has come to open it for beta testers. You can check at www.instant.com.br/viv.html for a snapshot of the application. Current modules are Dialplan and VoiceMail configuration. As you may see, it is all-visual, with drag and drop support and integrated sound recording, saving and cross-checking, so you dialpland

Hi, I'm trying to use iaxcomm. I can place a call from the softphone, but when I place a call to it, when I answer I get ... NOTICE[16401]: File channel.c, Line 1094 (ast_read): Dropping incompatible voice frame on IAX2[paulohm]/3 of format GSM since our native format has changed to ALAW My iax.conf looks like this .. [paulohm] type=friend host=dynamic username=... secret=...

Hi, I would like * to treat a SIP extension as a normal extension, when it comes to the busy functionality. In other words, if someone tries to call the SIP phone and there is already an ongoing conversation, the new caller should get a busy message/tone Is there any parameter that I can set? Is this something that should be configured at my softphone? Best, PHM

Hi all, We are about to make our first channel bank install. This will be a one PRI outside connection and up to 70 extensions. As the schedule (and the budget) is pretty tight, I would like to learn a little bit more about general experiences with channel banks, like echo cancellation problems, Caller ID usage, etc. TIA, Paulohm

Hi, we are setting a 120-channel conference server and would like to learn if someone already did this (hardware, problems, etc...) Best regards, PauloHM

Hi, I'm testing an E1 with E&M signaling. Some of the problems I'm running into are the following: 1) if I try to configure any channel above channel 15, I start getting a "multiframe alignment error" on my telco test equipment. So I have my zaptel file only configured for 15 channels, like this span=1,1,0,cas,hdb3 e&m=1-15 2) When the test equipment tries to send me

Hi all, Please help me in installing Asterisk. I am getting the following error when trying to install Libpri [treepr at CDC5S3FB-174202 Asterisk]$ cd libpri-1.4.2 [treepr at CDC5S3FB-174202 libpri-1.4.2]$ make clean rm -f *.o *.so *.lo *.so.1 *.so.1.0 rm -f testprilib libpri.a libpri.so.1.0 rm -f pritest pridump rm -f .depend [treepr at CDC5S3FB-174202 libpri-1.4.2]$ make install gcc -Wall

Hi, I'm installing my first E100P. My zaptel reads the following: Span=1,0,0,ccs,hdb3,crc4 E&m=1-31 My Zapata.conf reads the following: Signaling = em_w Channel =1-15 Channel =16-31 After starting the zapter service I get: ZT_SPANCONFIG failed on span 1: No such device or address (6) ??? PauloHM -------------- next part -------------- An HTML attachment was scrubbed...

Hi All, Does anyone have any experience with the ArrayCom VoIP phone? I bought one a couple of weeks ago, it used to work quite well with * until I misconfigured one option. I now cannot make it work anymore, because the phone boots up, doesn't find a valid SIP gateway, resets itself and keeps rebooting indefinetely ;-( Their technical support refuses to answer my questions. Any hint on a

asterisk-users-request@lists.digium.com wrote: >Send Asterisk-Users mailing list submissions to > asterisk-users@lists.digium.com > >To subscribe or unsubscribe via the World Wide Web, visit > http://lists.digium.com/mailman/listinfo/asterisk-users >or, via email, send a message with subject or body 'help' to > asterisk-users-request@lists.digium.com > >You can

Hi All- I'm working on a project that will have remote (internet)access to an * server through SIP phones, either soft or hard ones. Does anyone have any experience to share about which SIP product they are using under similar conditions, as well as which codec is being used and bandwidth usage? TIA! PauloHM

Is H323 built into the current CVS? If so, could someone give me an idea of a simple config? thanks, darran -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20030429/fffec1d1/attachment.htm

Hi, I just want to ask if anyone has some experience with Alarmreceiver application in * 1.2? Is this application reliable (according to wiki it isn't)? I managed to communicate Asterisk (Alarmreceiver) with a burglar alarm, but it behaves very strange. Sometimes alarmreceiver is able to get some events but sometimes not. Maybe there are some other non commercial applications which work under

Hi, I?m having a serious problem at one customer. After 6 hours answering a PRI line, * stops responding in a very similar situation as described here ... http://lists.digium.com/pipermail/asterisk-users/2003-July/015391.html I took a look at "/proc/first * PID/fd" and there are hundreds of file descriptors; If I try to connect using asterisk -r I get the "broken pipe"

Anyone using it? I''ve tried but after about 5 min I always get kernel panic. My setup is based on nano.txt. I works well but only if CONFIG_IP_ROUTE_MULTIPATH_CACHED=n. I just wanted to play with the new mpath feature of ip. But enabling CONFIG_IP_ROUTE_MULTIPATH_CACHED always resuts in kernel panic. I''m not using any kernel patches from http://www.ssi.bg/~ja/ - are they needed