similar to: Which ISDM BRI Card for Asterisk?

Hello, I would like to have some comparison between E1 cards from Digium and those from Eicon for a VOIP - ISDN Gateway. How does they compare on the echo cancel point of view? Is the echocancellation code for E400 good enough for production environment? Best regards, Daniel -- Daniel ANDRE (mailto:dandre@iris-tech.fr) IRIS Technologies - http://www.iris-tech.com Serveur kwartz -

Hello, I can't have asterisk working without echo when I place a call from IP phone (SIP or H323) to a PSTN Phone. The called number as no problem with echo but there is a very audible echo in the SIP phone. This situation occurs either when connected with ISDN card thru i4linux driver and with my openline card from voicetronix. Do you have any suggestion fo that? Regards, Daniel ANDRE

Hello, As I have problems getting transfert call working with my grandstream SIP Phones, I woul like to know if it is possible to do it with a proper dial plan in exten.conf. I haven't found any information about that in the docs. Regards, Daniel ANDRE -- Daniel ANDRE (mailto:dandre@iris-tech.fr) IRIS Technologies - http://www.iris-tech.com Serveur kwartz - http://www.kwartz.com

Hello, Sorry for posting again my question about MGCP Phone and Asterisk But I can't use it. I'd like to know weather it is a pb of my confiuration (mgcp.conf), My IP Phone device or asterisk. I include my mgcp.conf file and may send some debug trace. Thank you for any feedback. Best regards, Daniel ANDRE ; ; MGCP Configuration for Asterisk ; [general] ;port = 2427 ;bindaddr =

Hello, I am building an asterisk PBX with some stuff to make a usable VOIP / PSTN Gateway. I use the following devices: SIP Phones from GrandStream for VOIP side OpenLine4 from voicetronix for PSTN Side I am building things step by step with some priorities. I have now a working system able to place and receive calls from/to pstn. Before attempting to bring other functions (like voice

Hello, I have just received an MGCP Phone for test purpose and I can't place a call from my MGCP Phone. I can call my MGCP phone from a SIP Phone. Here is my mgcp.conf: ; ; MGCP Configuration for Asterisk ; [general] ;port = 2427 ;bindaddr = 0.0.0.0 ;[dlinkgw] ;host = 192.168.0.64 ;context = default ;line => aaln/2 ;line => aaln/1 [192.168.10.10] host = 192.168.10.10 context =

I have just started to play with callgroups and pickupgroups.. I updates my * from CVS this morning (about 15 mins ago).. I have placed callgroup=1 and pickupgroup=1 into each of my 3 phone configurations in sip.conf.. I place a call from phoneA to phoneB, then I go to phoneC and dial *8# , the call does not get picked up by phoneC and continues to ring on phoneB.. Have I not configured

Hello, I have an issue getting the chan_capi module to load in asterisk cvs from today. Plain 2.4.20 kernel with melware patches for the Eicon Diva Server Bri card. I load the modules with: modprobe -v divas divacapi I load the firmware with: divactrl load -c 1 -f ETSI -vd6 Output in /var/log/messages is: Nov 9 19:26:26 voice kernel: Eicon DIVA - DIDD table (http://www.melware.net) Nov 9

well .. good news :) i've just put in txgain=1.0 rxgain=1.0 in my zapata.conf and upgraded the Grandstream Budgettones i'm using to version 81 of the software and all seems fine .. there is still an echo but after the first couple of seconds of call it vanishes, as the echocancelling kicks in .. so far my client is happy :) now .. i have one slight problem left .. although most of my

I have a SwissVoice IP10S but can not seem to get it to have dialtone or dial on *. Calls to or from 3001 don't work. Any ideas are appreciated. Robert mgcp.conf is: [general] port = 2427 bindaddr = 192.168.0.110 [ip10] host = 192.168.0.5 context = from-sip line => aaln/1 The portion of extensions.conf is: exten => 3001,1,Dial(MGCP/aaln1,20) exten => 3001,103,Hangup

Hello, I would like to know if voicetronix card (specially openswitch6 and 12) can be used with asterisk. Is there any driver for this card? Best regards, Daniel -- Daniel ANDRE (mailto:dandre@iris-tech.fr) IRIS Technologies - http://www.iris-tech.com Serveur kwartz - http://www.kwartz.com

Hello, I have just received an MGCP Phone for test purpose and I can't place a call from my MGCP Phone. I can call my MGCP phone from a SIP Phone. Here is my mgcp.conf: ; ; MGCP Configuration for Asterisk ; [general] ;port = 2427 ;bindaddr = 0.0.0.0 ;[dlinkgw] ;host = 192.168.0.64 ;context = default ;line => aaln/2 ;line => aaln/1 [192.168.10.10] host = 192.168.10.10 context =

Hello, Now that I have a nearly working configuration for my IP10S with * I wonder if anyone has done call transfert with this Phone. In the IP10S documentation they talk about the 'service key' wich is the key with the white dot on it. With this Key, it should be possible to have a menu with call transfert entries. This menu should (accordingly to the documentation) depend on the

Hello, Dos anybody use these card with asterisk? If so I'd like to have some tips on how to configure them. Regards, Daniel ANDRE -- Daniel ANDRE (mailto:dandre@iris-tech.fr) IRIS Technologies - http://www.iris-tech.com Serveur kwartz - http://www.kwartz.com

I have * with i4l installed and working - on a dumb eicon card. It seems in order to get DTMF out of the BRI (for business banking - etc) - I should change from i4l drivers to capi drivers. wiki help seems to be for the Fritz card only...??? I have ticked the suggested boxes in 'menuconfig', explored the capi4linux websites - etc... but am missing some magic. I've "modprobe

Hello, Does anyone know what driver to use with an "Eicon Diva Server 4BRI" card? My modem.conf: -------------- [interfaces] context=remote driver=i4l msn=16453 device => /dev/ttyds01 -------------- I get the following error: -------------------------- == Loading modem driver chan_modem_i4l.so => (ISDN4Linux Emulated Modem Driver) WARNING[8192]: File chan_modem.c, Line 383

Sorry for a slightly off-topic question, but I'm getting desperate. I tried to use asterisk to talk w/ ISDN line and tracked the problem to i4l. I have a Diva PCI 2.02 (S/T) card and am running RH8 w/ 2.4.20 kernel (first version that supports the 2.02 w/ hisax driver). The switch is a 5ESS running NI-1 protocol. The card sync's up and reports other traffic on the line, but fails to

Hello, I try to use Asterisk with an Eicon-card called "DIVA Server 4BRI-8M PCI" but I don?t get it to work. I?m running on RH8.0. The Eicon-card supports isdn4linux. In the modem.conf file i have put following: ----------- [interfaces] ; By default, incoming calls should come in on the "remote" context context=remote ; Modem Drivers to load driver=i4l ; Type of dialing

Hi Everybody, Has anybody tried the above (or indeed any other 4XBRI cards) successfully with Asterisk. As far as I can see the above mentioned card is an active ISDN card but supported by it's own I4L driver. This leads to interesting questions particularly regarding echo cancellations (which usually doesn't work on the cheap passive cards with one exception as far as I can see).

I'm looking for an ISDN card that will work for me using either the i4l or capi with asterisk under Linux. I'm in the US, so I need an ISDN-U interface. Can anyone tell me if this card will work for me? http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&category=14922&item=6700879965&rd=1&ssPageName=WDVW There are a lot available, and for what seems to be a good price, if