similar to: ATA-186 Double Digit problems

Hello, I want to enable call forwarding for asterisk 1.6.0.6 I couldnt seen any config or option on gui or extensions.conf about it. I found some dialing plans to enable it on web as follows: [apps] ; Unconditional Call Forward exten => _*21*X.,1,DBput(CFIM/${CALLERIDNUM}=${EXTEN:4}) exten => _*21*X.,2,Hangup exten => #21#,1,DBdel(CFIM/${CALLERIDNUM}) exten => #21#,2,Hangup ;

I used to be able to pass dial strings to IAX2 providers with # characters at the end of the string. This is how we end dial strings for international calls. So, I would like to be able to selectivity chop off any # characters at the end of string, only if they exist. Basically as follows (chopping off the leading '9' with ${EXTEN:1} syntax: EXTEN from Phone EXTEN for Dial String

On Sat, Jun 04, 2005 at 10:09:29AM +0200, Stefan Gofferje arranged a set of bits into the following: > Hi folks, > > there are some 3rd party patches available for chan_sccp which add a > feature and fix a few problems: > > http://www.sineapps.com/news.php?rssid=726 > > sccp_cli.c.diff <http://www.newace.com/asterisk/sccp_cli.c.diff> > Adds support for

ive got asterisk running with chan_sccp and three cisco phones (2 7910's and 1 7960). lots of bugs. when i press the speed dial button on either 7910, asterisk dies. also, if i dial from the 7910 to 7910, everything works fine. i can dial from or to the 7960 once, and then one of the 10's and the 60 die and try to reregister. if i take the 7960 out of the mix and remove its

I get the following message when I dial 74#. Does anyone have any ideas on what might be going on? If I don't require numbers to be terminated with # everything works as expected, but you have to wait for the digit timeout, of course. MESSEGE: DEBUG[1150520624]: File pbx.c, Line 1683 (ast_pbx_run): Oooh, got something to jump out with ('#')! -- Invalid extension '#' in

How can you store "pauses" in speed dials for the GXP-2000? I used something like 8005551212,,,1,7890 to dial the toll free number, wait 6 seconds (I'm used to the commas being a 2 second delay), pressing 1, waiting 2 more seconds and then entering 7890. However, when I press the speeddial button, the phone freezes. Thanks, Waldo

I don't think that will fix my problem. The hints on the individual user extensions (101, 102, 103 and 104 below) are working just fine. sccp.conf example of 1 user: [devices] type = 7970 description = User1 tzoffset = -6 autologin = 101,401 speeddial = 102,User2,102@wct-internal speeddial = 103,User3,103@wct-internal speeddial = 104,User4,104@wct-internal device => SEP000F90CEF9D3

I've added lines like this: speeddial = 123,test speeddial = 260,Bob in the [device] section for my 7921, but the speed dials do NOT appear on the menu (click right from the main screen). Am I missing something obvious here? Thanks MD -------------- next part -------------- An HTML attachment was scrubbed... URL:

I have an outgoing line that allows me to set my caller id. I want to be able to change the caller id when ever I place a call using this line. I would like my user to press 7, then be prompted for their 10 digit caller id number, then be prompted for the number they would like to call in the form 1NXXNXXXXXX. How can I accomplish this??? Right now I am using this script that users have to

Hello @List, i'm using a Cisco 7970 / 7914 phone with Asterisk 1.4 & sccp part of my sccp.conf type = 7914 (Cisco 7970 with 7914 phone extension) autologin = 117 description = Test speeddial = 10,Test (10),10@mycompany my speeddial line is for internal call howto call a external number eg. +xx467584933 ?? i want to press a button and call directly out thank you greetings, Daniel

Quoth: OCG Technical Support <support at ocg.ca> > >Although we've programmed the softkeys per the manuals, they seem to have no >effect (just dead). For example, our 57i is setup like this: I had similar problems and ended up using the speeddial inband functionality. FWIW, my 57i's setup like so: softkey4 type: speeddial softkey4 label: "*Park" softkey4

Hi - Has anybody been able to successfully remap SpeedDials on Polycom phones? The manual seems to indicate that you can, and I followed the advice in this list message: http://lists.digium.com/pipermail/asterisk-users/2005-October/129142.html The result I get is that the remapped buttons act as the VolumeUp button, rather than as a speed dial. My configs look like this: <Mac

We have 4 employees and we're running Cisco 7970 phones. Each phone has a unique SCCP line configured (in the autologin area of the sccp.conf file) for each employee. We have hints set up in the extension.conf file like the following: exten => 101,hint,SCCP/101 exten => 102,hint,SCCP/102 exten => 103,hint,SCCP/103 exten => 104,hint,SCCP/104 We have speeddial= lines set

created you must place it in your web directory on the server. =20 I chained the command and also wrote the output to an xml file in the web directory. The command looks like this: =20 'php /etc/asterisk/directory.php.txt > /var/www/html/directory.xml' =20 System Speeddials using Services Button =20 =20 For speed dials I modified the php code to look to a specific file in the

Hi all, Is there a "speed dial" type application in *? The NEC PBX we currently use has a feature which allows any phone to access a system-wide speed dail database simply by keying the speed-dial number and pressing the 'redial' key from any extension. Even using a vinella phone on an sli the user can dial 77+speedial# and access this directory. Does * have a similar

Hello I patche dmy 7970 with the current SIP image i have 2 lines on it via sip and 6 hint speeddials but it seems thats only a speeddial no infos about busy status or so comes to the speddial button. somebody can help me?

Hi, This is a message I already posted on the chan_sccp mailing list, but since this list has a lot of active members, I'm hoping someone might be able to help (And my problem is * related, so I guess it's ok if I post it here also ;) ). I'm trying to get SCCP ATA188s to run with Asterisk. The Asterisk box uses the latest Asterisk@Home image (Version 2.6). I have compiled and

Hello When a call comes in, I'd like to fork a Python script that broadcasts a message so that users see the CID name + number pop up on their computer screen, and simultaneously ring their phones. The following script doesn't work as planned: It waits until the script ends before moving on to the next step, which is Dial(): =========== exten =>

file is created you must place it in your web directory on the server.<br> &nbsp;<br> I chained the command and also wrote the output to an xml file in the = web directory.&nbsp; The command looks like this:<br> &nbsp;<br> &#8216;php /etc/asterisk/directory.php.txt &gt; /var/www/html/directory.xml&#8217;<br> &nbsp;<br>

Hi guys I have a lovely little irritation on my hands. I?ve been trying to set up DID-based routing in Hylafax, and I?ve come across one hell of a headache: