similar to: Mediatrix 1102 / 1104 authentication problems....

We just did an upgrade on our Asterisk to the CVS version and our Mediatrix 1102s stopped working correctly. Our Asterisk is connected to the PSTN with a PRI. Calls from the PSTN to the Mediatrix 1102 work fine. The issue is calling out to the PSTN from the 1102. Asterisk looks like it process the call just fine except there is no talk path. Get this, though: If you flash hook and then

Hi all. I'm evaluating a mediatrix 2fxs 1102. seems great (it has also supervised transfer, that's very needed in office environments and works well). the only I thing I cannot make work is the auth to my asterisk server. If I don't set a password into the mediatrix and *, I can call out, but still the registration goes wrong. using a password, nothing works. I've done some

We have a Mediatrix 1102 hooked into the network. Both of the attached analog phones and all of their features work, but in the CLI we keep getting "-- Got SIP response 481 "Transaction Does Not Exist" back from XXX.XXX.XXX.XXX " (Where XXX is the IP address of the Mediatrix ) every few minutes. I have changed most of the settings in the sip.conf multiple times and have done

I have a Mediatrix 1204 FXO gateway setup for SIP. I would like to know if anyone has gotten this item to work with Asterisk. I need to get a 2 or 4 port FX0 gateway working with asterisk. The Idea is the following. PBX at lets say any Hotel(Analog lines FXS) - FX0 Gateway(1204) -- {Internet} -- Asterisk - local IVR system. (IVR is not at present running Asterisk old dialogic system has FX0

I was wondering if anyone has encountered and overcome this situation: We've got a PRI to our Asterisk system and notice that if a call comes in from a phone on our network, both caller name and caller number are delivered in the D Channel setup message. If a call comes to our switch from off-network, i.e. the LEC, long distance, or a cellular provider, only the caller number is sent in

Hi all, I just got a Mediatrix 1104 evaluation unit -- a 4 port fxs sip gateway. There's no printed documentation shipped with the unit, but I have a piece of software for windows that shipped with a different model (which I haven't tried configuring yet), that uses snmp to set misc variables (ip settings, sip stuff, etc.). Fairly baroque interface & pretty slim on help...

I am attempting to use a Mediatrix 1204 to interface to multizone paging from Asterisk. I have 4 different paging interfaces and want to connect each of those 4 to an FXO port on the Mediatrix. The desired result is to be able to issue some SIP dial string from asterisk, seize the FXO port on the Mediatrix and then have a speech path. I am able to place calls over the Mediatrix when it's

Hello, Does anyone know how to conference a call on the SNOM 200 phone? Whenever I push the cnf/tran button it just hangs up on the active call. The manual says you have to push the cnf function key but it doesn't appear in the lcd on my phone. Thanks -Matt -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi, I have problems with Asterisk recognizing dtmf tones sent by Mediatrix 1104 FXS. I can not enter mailbox number (voicemail) or pin code (meet-me). Asterisk shows 'username not entered' when dialing in voicemail. Both asterisk and Mediatrix have set inband dtmf. Can anyone help me out ? Best regards, Dave

I'm having a problem getting outbound trunking to work using asterisk and an external SIP FXO. 7 digit dialing produces the following output: -- Executing Dial("SIP/mitel-fe17", "SIP/5925660@mediatrix-1204") in new stack -- Called 5925660@mediatrix-1204 -- SIP/mediatrix-1204-645e answered SIP/mitel-fe17 -- Attempting native bridge of SIP/mitel-fe17 and

I added those lines to my configuration, and i just see with ethereal that my client dial and the 1204 led turn on and they started to interchange packets, im newbie with asterisk i have been trying another sip server with mediatrix that work so well, but i dont know how to set it up? could u send me all the configuration i need step by step? ----- Original Message ----- From: "Wojciech

Dear Group, I have been able to configure my Asterisk BOX to receive calls from Mediatrix 1204. I'm having problems sending calls out via my Mediatrix unit. The SIP Invite is sent to the Mediatrix but the Mediatrix unit sends back a Status : 480 Temporarily Unavailable. This is my configuration on Asterisk; exten => _78996.,1,Dial(SIP/${EXTEN:5}@192.168.6.52) exten =>

Hi all, I just picked myself up a Mediatrix FXO SIP gateway to play around with and hook into Asterisk but have no documentation. Are there default passwords or IP's that I need to know if I do a factory reset? Or better still, would anyone have a User Manual they could send my way? Any help would be appreciated. TIA. Jamie

I have the user manual, I'll send it to your email tonight when I'll be in my home. I have an APA III-4FXO too, until today I can't put it to work with asterisk. Kind regards, Miguel Date: Fri, 03 Sep 2004 16:07:59 +1000 From: Jamie Carl <geek@j-code.net> Subject: [Asterisk-Users] Mediatrix APA III-4FXO (or 1204) help. Anyone with user manual? To:

i'm new here and i need help on how where can i get software version 4.0.x of the mediatrix and how can i install it... mediatrix unit im using has a software version of 2.4.9.57. i would like to use H.323 not SIP... please need help asap!... hope to hear from anyone of you soon.. thanks in advance! ------ eder _______________________________ Do you Yahoo!? Win 1 of 4,000 free domain

I recently purchased a Mediatrix 1124 from an auction of a company that went out of business. It came with nothing other than the unit itself. In digging thru the Mediatrix web site, and various google searches, it looks like it only supports SNMP setup, and only with their software (or the correct MIB). However, Mediatrix doesn't appear to let you download said software or MIB from

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi list, I'm getting a strange problem with a Mediatrix 3631 Gateway connected to the PSTN via an E1 PRI link configured for Euro ISDN signaling. The Mediatrix sends incoming calls from the PSTN to an Asterisk server via SIP: this works fine. But when the caller hangs up, the Mediatrix doesn't send "Bye" to Asterisk, so the call is

Dear Group, I have my Asterisk box working with a Mediatrix 1204. I have 2 questions; 1) I do not seem to get a Call ID on the call coming via the Mediatrix 1204. I was wondering if anyone had this configured and if they could share this with me? 2) How do you route a call based on caller ID on Asterisk. At the moment I'm routing calls via DNIS. Thanks and Regards Shad Mortazavi

Possible Mediatrix 1204 fxo sip gateway workaround Need some feedback from experienced * users relative to this workaround please please please. Problem: The mediatrix 4-port fxo gateway does not provide any mechanism for * to select which "port" an outbound pstn call will use. (See lots of previous posts over the past four days for more detail if needed.) Our reseller has been

I have successfully implemented 1204 in semi production environment. Just want to share that it works very well, through the firewall (NATed). Unfortunately, it can not register with the server (and authenticate) but otherwise everything is fine. The audio quality is very good. Regards, Wojtek -------------- next part -------------- An HTML attachment was scrubbed... URL: