asterisk users - Feb 2004 - Mediatrix sip fxo gateway workaround?

Possible Mediatrix 1204 fxo sip gateway workaround

Need some feedback from experienced * users relative to this workaround
please please please.

Problem: The mediatrix 4-port fxo gateway does not provide any mechanism
for * to select which "port" an outbound pstn call will use. (See lots
of previous posts over the past four days for more detail if needed.)

Our reseller has been working with Mediatrix to find a way for *
to send pstn calls to a specific port number on their 1204 4-port fxo sip 
gateway. The proposed work around (below) sets a unique-but-well-known 
CallerID prior to sending the call to the 1204, and the 1204 filters on 
the CallerID sending the outbound call to the designated port. (The 1204
_does_ have such filtering/routing capability.)

Since this unique callerid is _never_ forwarded to the US pstn providers,
does anyone see any technical or management problem with using this approach
both in the short and long term???

I'm thinking this is an acceptable workaround since it does not require
micro-managing the dialplan, the 1204, etc. In my case, I'm not very
concerned
with scaling the solution since we could only hope business would increase
to the point where four additional pstn analog lines were needed. ;)
(FWIW, a 3,congestion statement can be added to the proposed statements.)

Thoughts anyone?
Rich
> Ok, you need to use the net2pstnsourcefilter  to make this work. In this
> example you need to set port 1 to 1111, 2 to 2222, 3 to 3333, 4 to 4444 .
> Then with the extension configuration below, and number starting with 9
will
> go to port 1 with the 9 removed from the string sent. Any number starting
> with 8 will be sent to port 2 with the 8 removed from the string sent and
so
> on. It works like a charm on my 1204.
> 
> [SIP]
> exten => _9.,1,SETCIDNUM(1111)
> exten => _9.,2,Dial,SIP/${EXTEN-1}@66.45.103.2
> 
> exten => _8.,1,SETCIDNUM(2222)
> exten => _8.,1,Dial,SIP/${EXTEN-1}@61.45.103.2
> 
> exten => _7.,1,SETCIDNUM(3333)
> exten => _7.,2,Dial,SIP/${EXTEN-1}@61.45.103.2
> 
> exten => _6.,1,SETCIDNUM(4444)
> exten => _6.,2,Dial,SIP/${EXTEN-1}@61.45.103.2

Rich,

If the Mediatrix uses the Caller-ID field to select which channel to 
use, then you really have no
choice but to do that.  As you pointed out, the Caller-ID info is not 
(and cannot) be passed to
the PSTN line.

Rich Adamson wrote:
>Possible Mediatrix 1204 fxo sip gateway workaround
>
>Need some feedback from experienced * users relative to this workaround
>please please please.
>
>Problem: The mediatrix 4-port fxo gateway does not provide any mechanism
>for * to select which "port" an outbound pstn call will use. (See
lots
>of previous posts over the past four days for more detail if needed.)
>
>Our reseller has been working with Mediatrix to find a way for *
>to send pstn calls to a specific port number on their 1204 4-port fxo sip 
>gateway. The proposed work around (below) sets a unique-but-well-known 
>CallerID prior to sending the call to the 1204, and the 1204 filters on 
>the CallerID sending the outbound call to the designated port. (The 1204
>_does_ have such filtering/routing capability.)
>
>Since this unique callerid is _never_ forwarded to the US pstn providers,
>does anyone see any technical or management problem with using this approach
>both in the short and long term???
>
>I'm thinking this is an acceptable workaround since it does not require
>micro-managing the dialplan, the 1204, etc. In my case, I'm not very
concerned
>with scaling the solution since we could only hope business would increase
>to the point where four additional pstn analog lines were needed. ;)
>(FWIW, a 3,congestion statement can be added to the proposed statements.)
>
>Thoughts anyone?
>Rich
>
>  
>
>>Ok, you need to use the net2pstnsourcefilter  to make this work. In this
>>example you need to set port 1 to 1111, 2 to 2222, 3 to 3333, 4 to 4444
.
>>Then with the extension configuration below, and number starting with 9
will
>>go to port 1 with the 9 removed from the string sent. Any number
starting
>>with 8 will be sent to port 2 with the 8 removed from the string sent
and so
>>on. It works like a charm on my 1204.
>>
>>[SIP]
>>exten => _9.,1,SETCIDNUM(1111)
>>exten => _9.,2,Dial,SIP/${EXTEN-1}@66.45.103.2
>>
>>exten => _8.,1,SETCIDNUM(2222)
>>exten => _8.,1,Dial,SIP/${EXTEN-1}@61.45.103.2
>>
>>exten => _7.,1,SETCIDNUM(3333)
>>exten => _7.,2,Dial,SIP/${EXTEN-1}@61.45.103.2
>>
>>exten => _6.,1,SETCIDNUM(4444)
>>exten => _6.,2,Dial,SIP/${EXTEN-1}@61.45.103.2
>>    
>>
>
>
>
>_______________________________________________
>Asterisk-Users mailing list
>Asterisk-Users@lists.digium.com
>http://lists.digium.com/mailman/listinfo/asterisk-users
>To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
>  
>