similar to: zap show channels -> No such command....

Hi, in response to a previous posting regarding getting the x100p to work, I was told to run "zap show channels," but when i do i get "no such command 'zap'" There was a previous posting on this, but the guy never posted the solution. thanks, Imran

Hello. Was just curious to know if anyone is working on a graphical interface to Asterisk using X windows, or something else similar. Thanks! David -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20031113/2718fd7e/attachment.htm

Hi all, Our Asterisk box sends calls outbound via either SIP (through our VoIP provider) or an E1 PRI (directly connected via a TE410P). When we dial a number that is engaged via our VoIP provider we get the following on the Asterisk console (numbers and IP addresses changed to protect the innocent): -- Called 12345678@sip-outbound -- Got SIP response 486 "Busy here" back from

Hi I am using a 4FXO , TDM400P card I am able to call outside , after modifiying extensions.conf with exten => _9X.,1,Dial(ZAP/1/${EXTEN:1}) using this , I can only dial through one of the port , Actually I want to dial outside using round - robin search After reading the manuals , I have plans to modified the above line as exten =>

I am installing one asterisk, to establish connection with my PABX Siemens, in ISDN, link went up normally, also I obtain to internally call the branches the PABX, normally, but when I try to dial for the PSTN, through pabx with the command exten = _ 19xxxxxxxx, 1, dial(zap/g2/${EXTEN}, 30) asterisk, reports me the following error: -- Executing Dial("SIP/8110-a729",

Hi All, Is it possible to go beyond 250 concurrent ZAP channels with some tweaking or workaround ? Meetme uses zap channels, so we could have a max of 250 conference ports. Is it possible to higher this ? "An Asterisk system can only handle a *max. of 250 concurrent ZAP channels*. This is due to the design limit (255) within the ZAP channel driver." Thanks, ~Vamsi -------------- next

Hi guys/girls, We are running a TDM04B card with Asterisk in a Linux box that has 15 GS102 extensions and 1 SNOM190 phone which we are using as an operator console. The FXO ports in the TDM04B are plugged directly into our telecoms provider's analogue lines. Something I've picked up with the SNOM is that sometimes when there are two active incoming calls via Zap channels and the first

I have 2 Asterisk servers that communicate with IAX2 between them and support multiple SIP clients each. Only one of them has Zap channels to the PSTN. I've been having problems because the Zap channels do not hang up when a sip client of the external server makes a call to the PSTN. SIP --- Asterisk ---- IAX2 ---- Asterisk --- Zap The local * server is using

Hi, For debugging purpose, it might be useful to repeat every 30s or so, pri show span and zap show channel commands have the results merged with /var/log/asterisk/full log file? Any better idea than running an dedicated shell script with a "asterisk -rx pri show span 1" line ? Regards -------------- next part -------------- An HTML attachment was scrubbed... URL:

I was playing around with the Flash Operator Panel, and came smack into a brick wall. We have a * box linked to a legacy Meridian System using a EuroIDSN link (TE405p) with 10 channels enabled. I also have several SIP extensions. What I wanted to do was to have a button for each of our (say) 32 users, 5 of which are on SIP. That leaves the other 27 on Zap. A potential of 27 users on 10

Let say I have a server located in Europe and one in North America. The 2 servers are connected together with iax2. Both server are connected to phone lines in there own country. If I want that when a user call a north american phone number from the server in Europe it use a zap channel on the server located in North America and also if someone in North America dial an European phone

Hi, I'm running CVS-HEAD-03/19/05-11:15:15 on Fedora Core 3 with Digium TE410P card. Calling into meeting rooms that have been configured with the p option works fine. From ZAP extensions the # key does not work to exit, however from SIP extensions the # key works fine. This makes me believe that somehow the DTMF doesn't get through the ZAP interface. After furter experimenting

Please can someone help me with the following two error messages: Error 1. I have loaded the Zaptel dirvers and everything is ok with ztcfg. I have configured Zapata.conf and everthing looks good but it apears the Zap channels dont load when starting Asterisk. When I make a call to one of the fxs port I get the following error message. -- Executing Dial("SIP/39-b204",

I have made bri-stuff.0.0.2rc19 to work (I think) but I can not achieve any in-dialing nor I can dial out; this is what I have from "pri intense debug span 1" command ---------- *CLI> pri intense debug span 1 Enabled EXTENSIVE debugging on span 1 -- Executing Playback("SIP/201-a862", "tt-weasels") in new stack -- Playing 'tt-weasels' (language

Hi, i have an asterisk box running with E100P (E1) line as PSTN gw. Sometimes zap channels hang and i couldn't make any PSTN calls but SIP calls are still fine. When this happens I also couldn't restart/reload asterisk from the CLI. I have to kill the asterisk process and run safe_asterisk again. any ideas? asterisk*CLI> show channels Channel (Context

Hi, A most peculiar and vexing problem for you all. I hope I have been verbose enough without being a firehose ;) The set up: I have a channel bank, using the r1t1 rhino driver with a rhino T1 card (the channel bank itself is a very legacy piece of equipment)- this supplies FXS for all the house phones. Also, a Wildcard TDM400P, using the wctdm module with 1 FXO module, this supplies FXO to the

Hello All, I remember there is a way to use two Asterisk servers and allow one to see a virtual trunk that makes it so server B can use the ZAP channels on server A. Does anyone know where I can find this? I am racking my brain trying to remember the terminology. It was like creating a 24 channel virtual T1 connection from server B to Server A that allowed server B to not have any ZAP

I have 12 T1's going into 3 servers, 4 in each into "Digium, Inc. Wildcard TE410P Quad-Span togglable E1/T1/J1 card 3.3v (rev 02)" cards. Each "group" of T1's have the primary D on 24 and the secondary D on 96. The first server (ts20) and the last server (ts22) can playback "demo-congrats" fine. The "middle" server (ts21) cannot -- just dead air.

What are the meaning of these Zap show channel output? Caller ID string: Owner: <None> Real: <None> Callwait: <None> Threeway: <None> Confno: -1 Propagated Conference: -1 Real in conference: 0 DSP: no Relax DTMF: no Dialing/CallwaitCAS: 0/0 Default law: ulaw Fax handled: no Pulse phone: no Echo Cancellation: 0 taps unless TDM bridged, currently OFF Actual Confinfo: Num/0,

Hello I am trying to setup Asterisk on 2 servers PBX300 and PBX200. PBX300 has X100P card with 1 telephone line. PBX200 don't have any Zap device. Softphone from PBX200 can talk to softphone on PBX300 but no outgoing call from PBX200. I can call from PBX300 outside but I am unable to configure soft Phone defined in PBX200 to dial out side using PBX300 Zap devices. I am geting error