similar to: multitech.

I've gotten asterisk running fine with several Grandstream phones as well as linphone on my PC. Now the last step is configuring the multitech MVP 130s that I have to send outbound calls to the POTS lines attached to the MVP130s. I'm having issues with the outbound and inbound telephone book entries I believe. The multitechs work fine when configured to talk to each other at remote

We recently had a customer install that went horribly wrong. Serious echo (pots lines into a cac cb) that, although * did a good job getting rid of alot of it, could not get rid of it all. We tried everything, every canceller, gain setting, etc... combination possible to no avail. Both the vegastream and mediatrix boxes also could not get rid of all of the echo. So, on an off chance, we

Hi List, I have a Multitech H323 Gateway MVP400 box with 1 phone on port FXO 1. I have Asterisk ruuning in Fedora Core 3. Both are in the same network. But I can't figure what I have to do in Asterisk to make that box work. What files I have to configure? Can anyone help me? I will really appreaciate youu help. Luis. _________________________________________________________ Do You Yahoo!?

Hi All, We have a Avia Difinity G3R to a Avia EPN connected through 2 dedicated T1 dsics, can I use an Asterisk solution to replace the T1's? If so can anyone give me feedback on what components I should be looking into to help me get started? Thanks in advance, Steve.

Dear all, I have a problem with constructing a nested loop. I have two matrices: pnr: 800 rows 14 columns where rows are 40x20 meaning that 40 rows belong to one of twenty objects in the matrix pnr mvp: 20 rows and 14 columns I want to: calculate a distance value with the first 40 rows of pnr but 20times with the 1st row of mvp then the next 40 rows of pnr and 20times with the second row

Hi all, This my first mail in the community. My name is Manolo. I'm new in Asterisk. My objective is to control some radio using Asterisk via web. In google I could see that the application app_rpt had this goal, but currently is not in the new Asterisk 1.8 or higher. Thinking in future, I thought the easer way to do that is to buy some RoIP unit and do the communication with

Everyone, I have a centos 5.10 machine set up to be a fax server using hylafax+ with three multitech MT5634ZBA modems. I am still in the testing phase of using this system for production, and during my tests I have detected a problem I have not been able to solve except for unplugging the modem from the usb port and plugging it back into the usb port. In the middle of a fax production of

hi .. i've just converted myself back to a newbie by trying to experiment with some new stuff .. I have connected two grandstream Budgettone 100 phones to my asterisk, and trying to experiment with them .. I am trying to get into the asterisk sample basically .. when I dial 1000 asterisk receives the call, but I do not hear any sound on the phone. Dialling from phone to phone direct (via

Ok, I am back from my thanksgiving holiday, and I find there was a big snow storm here in Seattle. Apparently during the storm there where multiple brown out/black outs. I have struggled since day one to get a high quality PSTN gateway configured with my very long loop and Mac based asterisk. I originally tried the HT-488, which had multiple issues, and was unacceptable. I then purchased

In zfs_mount() function, when we process a mount by a regular user through the delegated administration, the comment states: /* * Make sure user is the owner of the mount point * or has sufficient privileges. */ This makes sense, but the code doesn''t match the comment. The code ensures that user is the owner of the mount point _and_ can write to the directory. Or does "has

Colleagues, We're in the process of standardizing on Sprint PCS and Cingular phones on a national basis (~ 50 properties, 1000's of lines). I manage an Asterisk install at one location. I've been looking at the Multitech CellFinder CDMA for Sprint as a dial backup solution. Basically, it's a CDMA to POTS gateway, tied to a PCS account. We would see it as a trunk line and I

We have an application for Asterisk that will require connecting 144 fax ports into the system. Faxes will route externally over a PRI. The 144 ports are for local fax machines within the building. Not all will be faxing simultaneously. We just need to be able to provide ports in the building to plug in lots of fax machines. The plan is to run an Asterisk server for about 100 phones and these

Sorry if I post in this forum, this may be not the right one, but I hope to find in here some experts which could help me out. I have in one location 8 extensions from a Panasonic PBX ?KX-TD1232? connected to FXO Ports on an MultiVoIP Gateway from Multitech. On the other location I have 8 SP5100 IP-Phones from Micronet as remote extensions. Between the locations I have a VPN.

System info: Red Hat Enterprise Linux Server release 5 (Tikanga) Kerlen 2.6.18-8.el5 SMP x86_64 Samba version 3.0.23c-2 Eth0 && Eht1 bonded to bond0, 2Gbps. /etc/samba/smb.conf attached below... I?m seeing very slow transfers from Samba.... I?m not sure how else to describe it. If I try and copy a 4GB DVD image from the server to any Windows box (XP, 2003, 2008,

Ok, we got it working with 176x144 resolution. The following string produced an image that was not falling behind too much for too long - basically a little when it was getting TONS of movement, and then catching up fast. "65 58 110 0 1 1 90 8 120 1 1 " Now, we need to get this working on a 320x240 resolution, too (as sadly VP3 does not support 160x120. Seems to be a little senseless,

Hi All, Just installed our very first asterisk system, and we love it! I cant believe the different things you can do with it, just great =] My question is: How do I configure my system to play an mp3 file when a caller gets put on hold? Thanks in advance, Steve.

Hi, I am trying to build the driver for the TI USB 3410/5052 family of devices. Specifically, I am trying to hook up a MultiTech GSM modem. I have the source for the driver which came with the modem. However, I beating my head against the wall trying to get around the usb-serial.h not found error. I have found references saying usb-serial.h has been moved. Even though I have pulled

Hello all, When attempting a classification tree using mvpart, I get the following error: > thesis2.mvp=mvpart(bat_sp~., data=alltrees.df) Error in all(keep) : unused argument(s) (c(TRUE, TRUE, TRUE, TRUE, TRUE, TRUE, TRUE, TRUE, TRUE, TRUE, TRUE, TRUE, TRUE, TRUE, TRUE, TRUE, TRUE, TRUE, TRUE, TRUE, TRUE, TRUE, TRUE, TRUE, TRUE, TRUE, TRUE, TRUE, TRUE, TRUE, TRUE, TRUE, TRUE, TRUE, TRUE,

I have 8 lines coming into an existing PBX system and am looking for a cost effective way to replace the existing system with Asterisk. We need some of the features in Asterisk, including its ability to support remote offices (long distance savings). At first glance this appears to require a T100P card and a channel bank, but that seems rather expensive. My estimated price on that would be

Hello, We put the DirectShow filters on hold till the release of our software (next week) and will integrate it into the first patch. Till then, our customers will ahve to live with a VP31 vfw hack. Now, my problem is that I need to integrate the vp31vfw.dll setup into a MSI file, because spawning another installer is not exactly an option. Can anyone post a list of complete registry keys that