similar to: Actiontec's Internet Phone Wizard and Digium's S100U

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I've tested the S100U unit in two different computers both with different USB subsystems. The one it worked the best in used the usb-uhci USB driver. The other system uses the usb-ohci USB driver. To make sure it was not the installation, I used the same hard drive that had asterisk in both systems. And I moved the X101P and S100U between both

We have a S100U which we were using as our sole internal phone extension. Today it died. Picking up the phone now results in a brief dialtone followed by bursts of random static and crackling noises and then a second or two of fast-busy followed by silence and more crackling noises. I've tried the hardware attached to a couple of different machines as well as a couple of different phones.

Hi, I have been trying to figure out why the S100U is not performing very well on RH9.. Here is my thinking..( may be totally wide of the mark but here goes anyway) I remember reading somwhere that the sound system used by RH has changed... Does the S100U not depend on the sound subsystem?? So what I think is that the sound subsystem in RH9 and the S100U are not happy working together.. Does

Yup there is the tigerjet unit... has anyone found any others BUT which there might be a hope that iaxclient and diax could actually get a bell ring ? Gary

Hi, I have got a hissing/humming noise on my handset that is connected to the S100U USB device.. I was running a CVS version of * that was about 2 to 3 weeks old and had perfect quality.. But that HDD died on me so I reinstalled and used the latest CVS, now I have this sound that is best describes as a similar sound to the noise a cpu fan makes.. Like a high piched hissing noise.. Any one

Hi, I'm trying to get an S100U that came as part of the dev kit light working. I have tried compiled EHCI as modules or directly into the kernel but the same problem happens both times: I connect the S100U and run modprobe wcusb - initially nothing happens (great - no errors, etc). Fairly soon the server will die. It seem to be related to communications with the S100U. For example if I

Hi Everyone, I've been using Asterisk now for a few months for my small office (which is mostly just me while other guys are always on the road so we rely heavily on telephones) - I'm very excited with Asterisk as it can do everything I've ever wanted to do with a PBX. I'm having a problem with an S100U USB --> Telephone interface. I haven't actually made it work yet

Hi all, this is another post about this problem. I installed from scratch a new Suse Linux 10.0, with latest stable asterisk. Moreover I add the lines to /etc/udev/rules.d/50-udev.rules, in order to let the driver create the /dev/zap....... When I plug into usb port my TigerJet adapter, I see on /var/log/messages Feb 24 14:55:02 srvlnx05 kernel: usb 1-2: new full speed USB device using

Hi folks! I'm using an X100P (connected to my phone line) and an S100U, and when I calls out from the phone connected to the S100U it is a very bad sound quality, it "pops" and "jitters" a lot. But internal calls from for example a SIP client to the phone on the S100U sounds good. Calls from an SIP client to the outside world using the X100P also works good! My second

I have an ATA box on my local LAN, talking to asterisk. On a remote LAN I have another instance of asterisk; that box has an S100U as its primary instrument. I set up an extension to dial between the two, sort of a "private line," and with the exception noted below, things appear to work just fine. That exception is echo. The "ATA" side of the conversation has a

I installed Asterisk as per instructions in the FAQ on the digium.com site. Double checked it. I also think they have a bug in the zapata.conf where the context should be incoming and not internal. 1) I hear no dialtone when I pickup the phone on the S100U. Asterisk sees the event and displays the message on the screen. I tried dialing but nothing happens. I hangup and * shows the hangup event.

After not having time to do anything with Asterisk for 2-3 months, I finally got a chance to get back into it. Unfortunately, I get the feeling that the S100U USB device that I purchased as part of the Developer's Kit (LITE) isn't working right. When I pick up the handset, all I hear is some either some low volume static or nothing at all. Only twice in the last week have I been

I've installed ipw2200-firmware-3.0-3.nodist.rf from RPMForge using yum OK. I've loaded the ipw modules with /sbin/modprobe ipw2200 and then /sbin/lsmod | grep ipw which gives: ipw2200 136873 0 ieee80211 33417 1 ipw2200 However, when I run system-config-network I don't see Intel Coporation PRO/Wireless 2200BG (eth1) in the list of adapters. Also, when I

--- Raja Chidambaram <raja_chidambaram82@yahoo.com> wrote: > Date: Wed, 3 Aug 2005 06:27:05 -0700 (PDT) > From: Raja Chidambaram > <raja_chidambaram82@yahoo.com> > Subject: Phone interface hardware > To: Asterisk-Users@lists.digium.com > > Hello All, > > We are in the process of putting together an asterix > based phone network in our office. The

Dear people of the help list I am drying to analyze my data using the 'lmer' function and I keep having problems. This is the model: > fm1<-lmer(dbh~spec+scheme+(1|Plot),data=d, REML=FALSE). I analyse tree size (dbh) of 3 different species (spec) and 3 planting schemes (scheme). I have 5 plots, which I hope to model as a random factor. (However, the subsequent output is based on

My system seems to be generating a call on its own... Unfortuately I can't give much more information.. I have an X100P and an S100U.. My Modem and the X100P share a common line.. When I am on the internet (which is most of the day) * just sits there and does nothing (apart from when I am testing ideas for the dial plan), but at night when I am sleeping and the modem is not connected then

Hi, I have CentOS4.1 up to date and I get on boot: ipw2200: Detected Intel PRO/Wireless 2915ABG Network Connection divert: allocating divert_blk for eth1 ipw2200: ipw-2.2-boot.fw load failed: Reason -2 ipw2200: Unable to load firmware: 0xFFFFFFFE divert: freeing divert_blk for eth1 ipw2200: failed to register network device ipw2200: probe of 0000:03:03.0 failed with error -5 My understanding

Hi everyone, Is it possible to use tapply(x,y,mean) if not all groups of x by y are of the same length (for example if you have one missing observation)? I tried tapply(x,y,mean,na.omit=T) but it doesn't work! Steffi -- --------------------------------- Stefanie von Felten Doktorandin ETH Z?rich Institut f?r Pflanzenwissenschaften ETH Zentrum, LFW A 2 Telefon: 044 632 85 97 Telefax: 044

Hello, Where can I find docs/specs about USB FXS device (S100U)? How much does these adapters cost? Thanks in advance, Thomas

Anyone know how many RENs an S100U can drive? Or where I can get some sort of booster? I'm trying to drive 2 gong-type ringers (IE, 2.0A REN). - awh