similar to: Lucent Partner extension to X100P

I'm running SIP between my Lucent TNT acting as a gateway, and an asterisk server. We have a PRI coming into the Lucent. Basically the problem I'm having is mostly on inbound calls but some outbound calls as well. I hear echo and sometimes some weird artifacting on calls coming in from the lucent. Everything routed over IAX to VoIP Jet or Nufone sounds fine. It seems like every 3

I've read the wiki and other resources on how to connect Vonage / Voicepulse and all these other services to Asterisk... We are attempting a connection to a Lucent iMerge. Lucent has told us that it won't work - but we feel confident that it will. Has anyone worked with the Lucent iMerge - or would be willing to help lend a hand? It is capable of H323 / MGCP. Even if I could make the

Hi, I am having some issues with a new server install in Singapore. Outbound calls work fine. Inbound calls are not picked up by Asterisk. Zaptel 1.2.25 and Asterisk 1.2.28 both built from source. libpri installed wctdm and zaptel load without error Jun 6 23:34:03 fs01 kernel: [211138.372933] Zapata Telephony Interface Registered on major 196 Jun 6 23:34:03 fs01 kernel: [211138.372937]

Is anyone out there using Lucent brand equipment to handle an incomming DS3, converting all 672 calls to SIP (as G729) and sending those to Asterisk/SER over ethernet? If you are and are willing to speak to my boss about your experiences (over the phone) with it, please contact me off list. We have a possible contract with a local CLEC to handle their long distance, and they want to send to

We have had quite a bit of success with our T100P and TE410P cards interfacing to Nortel Meridian PBXes and also to a Livingston Portmaster 3 using ESF/B8ZS and various combinations of E&M wink and ISDN PRI (usually in 5ESS mode). In the near future, I may also need to interface to a Definity via a T1. I was planning to use PRI--is that an option for you on your switch? -----Original

Hi everyone, We have been working with Asterisk for a while now and would really like to expand its capabilities by fully integrating it with our Definity g3si and are wondering about other peoples experiences with similar setups. Thus far we have only been able to achieve a partial 1 way integration, but ultimately would love to route inbound voip calls to the asterisk out of the lucent.

Hi Everyone, So I have been further exploring the integration of our asterisk server and our lucent definity g3si system. I took the suggestion of setting up an isdn-pri line added the two way tie trunk and the signalling group, but can't seem to get the PRI signalling working on the asterisk correctly. I've set pri type to network on the lucent, and pri_cpe in zapata on the asterisk, but

Calling all Definity admins, Got a few questions about Definity -> Asterisk interoperability. 1) What are the options for integration? Can I hand off extensions from the Definity and vice versa? 2) Anybody have any working configs they would like to post? I've found and read the legacy integration on the wiki about the two systems. I've also googled and found a few threads that were

Hello, I have a Lucent MAX TNT, (DS-3, 672 modem ports, 28 PRIs). I'd like to be able to direct an inbound fax call into my TNT, have it answer the fax and send the image file over to Asterisk, or some other system to deliver to an e-mail address(s). I'm not sure if I need Asterisk to any of the call control or not. I'd also like to setup a print queue and have outbound

I'm looking for someone familiar with setting up some of the more advanced features of the Lucent TNT, preferably someone with knowledge of Trunk Groups and choosing outgoing PRI channels based on call type and perhaps NPA-NXX We currently have 8 PRI's. 7 of them are for our dialup pool, the 8th is for our voip. We currently run the dialup PRI's to a seperate TNT We want to

Does Asterisk work with Lucent or any other PBX phone systems????

Hi All, I've got an MD3200 modem which is working as a Zaptel FXO interface for Asterisk (X100P clone I believe). It seems to work, but on incoming or outgoing calls I can hear the other party ok but when I speak, I hear my voice echo back at me (quite quietly but it's distracting!) on everything I say. The other party doesn't seem to hear the echo - they just say I sound a bit quiet.

Hey Everyone, Thanks for helping with this integration, I finally got it working! I have inbound and outbound dialing from/to the asterisk box via a pri line! I would definitely like to contribute this information to the wiki so we can fill in some of the information gaps there. In the short term I wrote up what I did and scanned in all of the nescessary screen prints from the lucent into a pdf

we're evaluating the use of a Lucent APX8100 E3/SS7 to SIP gateway for use in conjunction with asterisk, serving something like 4000+ lines. does anyone have experience with the APX8100 and it's integration with SIP on asterisk ? does the APX8100 handle SS7<->SIP signalling well enough to be used ? any anecdotes would be well appreciated. -- Regards,

I'm trying to connect an Asterisk system to an Avaya Partner ACS R6 system. The problem I'm having is that I cannot get the partner system to get CallerID over the T1 modlue. The partner is using the T1 with E & M signalling (which I don't think can be changed), and whatever I tried didn't work. My only option right now is to get FXS ports on the Avaya side plugged into the

Hello All, I have this strange problem, I can dial out with my sip phone and it seems to work relatively well, but when I call in, the line just rings and rings, I get no indication in asterisk that it's detecting an incoming call. The strange thing is that in ztmonitor 1 -vv the rx volume goes from around 99% when the line is idle to 0% as soon as the line starts ringing. I'm located

Hello folks, I've been trying to get T.38 over SIP working with calls terminated by a MAX/Lucent/Ascent TNT. As far as I can tell, SIP and T.38 are actually working perfectly; however, I can't get the TNT to properly terminate a FAX call. Does anyone have a working configuration for SIP and T.38 for calls from a TNT or APX? Here's a brief description/diagram of my test setup:

Hi all, I am new to asterisk, but experienced with Linux and Avaya/Lucent G3R hardware/software. We currently have a large inventory of spare Lucent 64XX phone sets. I'm considering setting up an asterisk system for a remote office, and would like to use the Lucent sets because they are cheap, and familiar to my end users. Does anyone know of a card that can drive these sets? I think

I've posted this before but before it was just wishful thinking. But now it has become a real need. Our boss has a 5 year grudge against Lucent. They had a Lucent here that would simply stop processing calls. No alarms. No nothing. I'm sure that in 5 years, new software has been released. I've got another guy running several AS5400HPX's telling me that you can only do about

With one IVR payment system, I noticed quite a difference in DTMF transmission between these two cards. The IVR missed nearly all digits from X100P, while receiving digits from TDM fine. Since neither card process or synthesize audio, what can the difference be? (This particular IVR has problem with some regular phone devices, too.) Yuan Liu