asterisk users - Nov 2006 - Lucent TNT Help

I'm looking for someone familiar with setting up some of the more 
advanced features of the Lucent TNT, preferably someone with knowledge 
of Trunk Groups and choosing outgoing PRI channels based on call type 
and perhaps NPA-NXX

We currently have 8 PRI's.  7 of them are for our dialup pool, the 8th 
is for our voip. We currently run the dialup PRI's to a seperate TNT

We want to merge these all on to one TNT.

I found out how to do dnis-or-voip for the call type on the voip line 
which allows me to set based on dialed number if its going to go to a 
modem or voip call, however, I'm trying to figure out
how to set up the TNT to have voip origination use a certain PRI in the 
pool as the primary and then fail over to the other PRI's.  I think it 
will probally involve setting up trunk groups, but I'm not entirely sure 
how I would set the trunk group for origination. Can anyone give me some 
friendly advice to try to figure this out?

-Corey

Hell we sold ours off about 2 1/2 years ago...so I am a little rusty on em 
now...
But this was always a pretty easy manual to look at: 
http://www.hal-pc.org/~ascend/MaxTNT/


----- Original Message ----- 
From: "Corey Frang" <corey@rockriver.net>
To: "Asterisk Users Mailing List - Non-Commercial Discussion" 
<asterisk-users@lists.digium.com>
Sent: Thursday, November 02, 2006 6:27 AM
Subject: [asterisk-users] Lucent TNT Help

> I'm looking for someone familiar with setting up some of the more
advanced
> features of the Lucent TNT, preferably someone with knowledge of Trunk 
> Groups and choosing outgoing PRI channels based on call type and perhaps 
> NPA-NXX
>
> We currently have 8 PRI's.  7 of them are for our dialup pool, the 8th
is
> for our voip. We currently run the dialup PRI's to a seperate TNT
>
> We want to merge these all on to one TNT.
>
> I found out how to do dnis-or-voip for the call type on the voip line 
> which allows me to set based on dialed number if its going to go to a 
> modem or voip call, however, I'm trying to figure out
> how to set up the TNT to have voip origination use a certain PRI in the 
> pool as the primary and then fail over to the other PRI's.  I think it 
> will probally involve setting up trunk groups, but I'm not entirely
sure
> how I would set the trunk group for origination. Can anyone give me some 
> friendly advice to try to figure this out?
>
> -Corey
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
> -- 
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.1.409 / Virus Database: 268.13.21/511 - Release Date: 11/1/2006
>
>