similar to: (no subject)

Hello, I resolved my echo issue using grandstream/estara etc etc sip phones and wcfxo interfaces from digium. I swapped out my via kt400 based msi kt4vl motherboard for an asus p4pe? i845? based motherboard and the echo has completly gone away along with aggressive suppressor option in the makefile. I hope this helps others. Brian J. Schrock Anistone Technologies, LLC 6926 Avery Rd. Dublin, OH

Like most others on this list I also have some really annoying echo whenever a call goes out to the PSTN from a SIP phone... SNOM/Budgettone -> Asterisk -> X100P -> PSTN I have tried every echo canceler in the makefile and turned on and off aggressive suppressor etc. etc. etc. tried 32,16,128, and 256 bridgetaps and I can get it reduced to only a few seconds on the intro of the call and

Hello, so far I've been using the latest tarball to compile celt into a multi platform library. gcc 4.2.1 under MacOSX 10.6 (Snow Leopard) is spitting out a few warnings. I wanted to check in the latest git repository to see if they might have already been fixed before reporting them. I would much prefer do so without having to install a git client on my mac, that is why I was looking for an

Hi, some time ago I tried to boot an isolinux boot loader from another one to be able to boot e.g. a Knoppix CD with its original boot loader and menus from a "main" isolinux on a multiboot DVD. This works for isolinux <= 3.07 now! However, newer isolinux boot loaders have some problems and the isolinux (e.g. of the Knoppix CD) loaded from the multiboot DVD's main isolinux

Hi all, I installed the estara softphone and had no problem registering it with asterisk. I could make calls to other hardware SIP phones (Cisco 7960) from the softphone, but I couldn't call the softphone from the Cisco 7960s. The asterisk console gave me an error message saying "unable to create channel" to my softphone. What could be the problem? I searched the archive with no

Hi, I did not find any hints in the web where to configure/setup/manipulate the rx/tx ring buffer allocation within dom0 for xen-unstable, maybe someone here can nudge me towards the right knob. The problem: when booting a handful of domUs and connecting them (comprising a small experimental IP network with links and nodes etc.), some interfaces that have been given by the configuration files

Hello people. I would like to know if someone knows about any applet to include in a web page to start calls. What I am looking for is something that doesn't allow users to change numbers, or any other option, so I can include it in my web page and force them to call to me and no one else. I have tried JIAXClient, but it allows people to call anywhere, and what I want is just a configurable

Hi, since 2.0.4 didn''t work with my notebook (see ''[Xen-devel] "general protection faults" in dom0 when loading intel-agp module'') I tried xen-testing. Now I''m on xen-unstable but I still get the following problem. X loads but doesn''t display anything more than the X cursor. The rootwindow looks kind of strange. Please see

Can anyone recommend a client / phone that runs on Windows XP, with either a sound card or some other hardware? Ideally free, but does not have to be. Thanks...

Hello everybody! I have some problems with my Astersk. I have an analogical OpenVox card and A Billion ISDN card (with mISDN). I load the modules with modprobe zaptel and modprobe wctdm. When I run ztcfg -vv I have this: Zaptel Configuration ====================== Channel map: Channel 01: FXS Kewlstart (Default) (Slaves: 01) 1 channels configured. ZT_CHANCONFIG failed on channel 1: No

Hi! I have been using pxelinux with memdisk to boot our workstations with our custom floppy, which is a MSDOS boot disk (actually it is win98) On one of the PC's I'm testing, a Fujitsu-Siemens which has an AMDtek based on-board network card and when PXE is activated, it gets an IP from the DHCP, then it finds the TFTP server, downloads pxelinux.0, executes it which causes the floppy to

I found this information on how to make XP have a dialpad in Windows Messenger which was awesome news HKEY_CURRENT_USER\Software\Microsoft\MessengerService\CorpPC2PHone (change it from 0 to 1 and a magic new choice to make phone calls appears) only to be crushed hours later when I realized It doesnt seem to do dtmf right. If i make an ext lead to AgentLogin for instance and press my

Hi. I have sjphone installed on windows and working except for dtmf. I read the docs for sjphone and it uses inband dtmf. I configired dtmfmode=inband but it still does not recognize it. Someone on the lists said that inband only works using alaw or ulaw but i tried only allowing that too but still no go. Hmm.. any other ideas? I can't get any other client to work on windows :-/ I

Anyone else seen this eth-device and what brings it up? [root at oh1mrr etc]# ifconfig __tmp1192348344 Link encap:Ethernet HWaddr 52:54:AB:DD:2E:D1 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:2094689 errors:0 dropped:0 overruns:0 frame:0 TX packets:1645734 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX

hi, i'm experiencying a strange problem with a mandrake 9.0 machine, kernel 2.4.19, samba (different versions, including latest). when I copy large amount of data from any win98 machine to a share directory on linux, after a random time the linux machine hangs; not responding even to ctrl-alt-canc, only possibility is to reset. I was using a realtek 8139 (driver 8139too) which I know

Gracias, Javier; Anduve buscando entre tus dos propuestas para mi encarables (plyr y reshape2) y presupongo que el problema es eso del ingenio que comentás, que hay que tener y no tengo. Los paquetes me vinieron igualmente re-bien, porque me di cuenta que no tengo por qué sufrir haciéndolo a mano cada vez que encaro algunas de esas situaciones. Pero lo de ordenar los datos para el MCA... el

Why standard Centos 5.2 kernel does not have a module "pata_via." I have an old motherboard and IDE drive. The standard kernel does not work. Kernel include a module "pata_via" only in centosplus. It is a bug?

Hi, does anyone have any idea whether VIA VT6102 "Rhine II" and Realtek RTL 8100 Ethernet chips are supported by FreeBSD? The hardware list for supported chips does list 'VT86C100A "Rhine II"' but according to VIA website VT86C100A is actually just "Rhine" and it is obviously not the same chip. (The 'VT3043 "Rhine I"' chip mentioned in

This is completely offtopic, but well, I run the list so there :) Please respond directly to me and not to the list, though, to save the people who don't want to listen to this discussion. I am looking for a small PC with very specific criteria; these machines are going into an industrial setting (which I cannot explain in detail); I was hoping someone on this list might have experience with

All, I have a problem with a new Seagate hard disk. The problem occurs when i go to install CentOS, i insert the cd and start the boot up process, when it gets to the section where it detects the hard disks, the driver is seems crashes, the message it produces complains about no one caring about a interrupt on IRQ11. The hard disk is a Seagate 200GB 8MB SATA150 NCQ drive, on a SilliconImage