similar to: Outgoing CallerID

Hello, I have som problems with my BRI/capi setup. I manage to call in to the system (some rows below). ---------------- -- Executing Dial("CAPI[contr1/16453]", "SIP/BYEXTENSION@janm|10") in new stack -- Called s@janm -- SIP/janm-63f5 is ringing -- SIP/janm-63f5 is ringing -- SIP/janm-63f5 is ringing ---------------- But I can't make outgoing calls from

Hello All! I have a strange problem with Cisco 7905. It is forwarding unanswered calls to VoiceMail even thought I have setup it not to. My ring timer on cisco 7905 is 60s, and my ForwardToVMDelay is 3000s. This means that call should never be forwarded to VM! This is true if I call from internal number then this happens on asterisk: -- SIP/104-6073 is ringing -- Nobody picked up in

I have some problems with busy detection and SIP. When I'm making a phonecall (out or internal) and someone else is calling me, the phone (Snom200) is ringing and leaving the first caller (no difference if I call someone or if someone calling me) in the background waiting. It doesn?t hang up the first call but the second one is overriding the first. Is there anyone that has experienced the

Hello, I am setting up a new (remote) server. I initially installed 9.2 RC4 amd64 because that's what the data center put in the drive for me. Shortly thereafter I downloaded 9.2-STABLE sources and compiled world and a generic kernel. While doing so the system became unreachable by SSH The SSH sessions appeared to connect but there was never any data returned. I could telnet to port 22

Hi, I just installed FreeBSD 9.0-release / amd64 on a new machine (Acer Aspire X1470). I installed from a usb memory stick (the default amd64 image), which I booted by pressing "F12" and selecting it from the boot menu on the machine. I installed on a SSD (which replaced the hard drive originally in the machine), using the default scheme for 9.0 (GPT). The installation was painless (many

Hi, an attach() call turned out to be my problem (see below). Thanks everybody for the helpful comments. - Jan -------- Original Message -------- Subject: Re: [R] Memory leak in R v1.5.1? Date: Wed, 07 Aug 2002 01:12:09 -0400 From: Jan Meyer <janm at mit.edu> To: Peter Dalgaard BSA <p.dalgaard at biostat.ku.dk> References: <Pine.LNX.4.31.0208061713050.2645-100000 at

Overnight I was running a zfs send | zfs receive (both within the same system / zpool). The system ran out of space, a drive went off line, and the system is degraded. This is a raidz2 array running on FreeBSD 8.1-STABLE #0: Sat Sep 18 23:43:48 EDT 2010. The following logs are also available at http://www.langille.org/tmp/zfs-space.txt <- no line wrapping This is what was running: #

Hi, I was trying to rebuild world on a FreeBSD 10 test system, that I had just installed. ZFS root was setup. I let the installation program do all the ZFS setup and configuration. I put root on a 5 disk encrypted raidz array. Besides the installer configuring 5 times the amount of swap space I asked for (asked for 8gb, installer put 8gb on each drive, for 40gb in total.) everything was working

Hello all. I have a supermicro 16 bay box with a LSI 9211-8i card. We use it for temp data storage, and we wanted to try the l4z compression. After updating the source tree to r247839: and doing a make buildworld cycle all works fine. But at boot time we get some warnings. make_dev_physpath_alias: WARNING - Unable to alias gptid/281951f4-a996-11e1-83eb-00259061b51a to enc at

Hi Guys, Has somebody encountered (significantly) different read/write speeds when using gmirror? I have 2xWD WD30EFRX RED drives which are configured as follows: $ gmirror status Name Status Components mirror/root COMPLETE ada0p2 (ACTIVE) ada1p2 (ACTIVE) mirror/data COMPLETE ada0p4 (ACTIVE) ada1p4 (ACTIVE) mirror/root is mounted

Hallo all, I am trying to get * with chan_capi and a ptp-ISDN with 4 lines on a AVM C4 card to work. But weather inbound nor outbound is working :( My capi.conf: ; ; CAPI config ; ; [general] nationalprefix=0 internationalprefix=00 rxgain=0.8 txgain=0.8 [interfaces] mode=immediate isdnmode=ptp msn=8993 incomingmsn=* mode=immediate controller=1,2,3,4 softdtmf=1 ;accountcode= context=demo

> On Fri, Aug 3, 2012 at 3:09 PM, Torfinn Ingolfsen > <torfinn.ingolfsen@getmail.no> wrote: > > Just a short update on this machine (Acer Aspire X1470) and the GPT / UEFI situation. > > Today I set up another partition, EFI system partition. The partyitions now looks like this: > > root@kg-vm2# gpart show ada0 > > => 34 250069613 ada0 GPT (119G)

Is anybody luck with Heroes of Might and Magic 4 multiplayer? All works fine but multiplayer, when I try to create game I see message box with "multiplayer_creation_failure" apper and log looks so: err:ole:CoGetClassObject couldn't load InprocServer32 dll dpnet.dll fixme:ole:CoCreateInstance no classfactory created for CLSID {934a9523-a3ca-4bc5-ada0-d6d95d979421}, hres is

Hello, I try to use Asterisk with an Eicon-card called "DIVA Server 4BRI-8M PCI" but I don?t get it to work. I?m running on RH8.0. The Eicon-card supports isdn4linux. In the modem.conf file i have put following: ----------- [interfaces] ; By default, incoming calls should come in on the "remote" context context=remote ; Modem Drivers to load driver=i4l ; Type of dialing

O.K. thanks a lot, Felix and Peer Oliver. But somehow asterisk keeps telling me while startup: [chan_capi.so] => (Common ISDN API for Asterisk) Jan 24 14:30:47 NOTICE[9796]: chan_capi.c:3271 load_module: Unused contr1 Jan 24 14:30:47 NOTICE[9796]: chan_capi.c:3271 load_module: Unused contr2 Jan 24 14:30:47 NOTICE[9796]: chan_capi.c:3271 load_module: Unused contr3 Jan 24 14:30:47

Hi, i use chan_capi 0.3.1 with asterisk (stable branch cvs) and 3 x c4 active ISDN card. From Controller 1 - 7 there are no problems making calls between asterisk and the pstn. But when i make calls from controller 8 - 12 i get on every controller (8 - 12) a segmentation fault in asterisk :( I tried different linux distributions (gentoo 2004.1, redhat 9.0 , suse 9.1) but same error.

Good day, does anyone have AstTAPI running for incoming calls, and would like to show some examples. My setting right now looks like this: sip.conf -------- [22] type=friend dtmfmode=info username=22 mailbox=22 secret=privat host=dynamic context=privat canreinvite=yes callgroup=1 incominglimit=2 extension.conf -------------- exten => 123,1,noop ;Hint(SIP/22) exten =>

WARNING[<pid>]: CAPI[contr3/123456]/178 already has PBX structure?? WARNING[<pid>]: CAPI[contr3/123456]/178 already has a call record?? WARNING[<pid>]: CDR on channel 'CAPI[contr3/12345]/177' already started WARNING[<pid>]: Thread 1109916592 Blocking 'CAPI[contr3/123456]/178', already blocked by thread 1116277680 in procedure ast_waitfor_nandfds

Hi, I am using FreeBSD 8.2 and went to add 4 new disks today to expand my offsite storage. All was working fine for about 20min and then the new drive cage started to fail. Silly me for assuming new hardware would be fine :( The new drive cage started to fail, it hung the server and the box rebooted. After it rebooted, the entire pool is gone and in the state below. I had only written a few

Hi everybody. I've just upgraded a box from FreeBSD 9 to 9.1 via freebsd-update. At the first reboot, the machine stopped with messages about GRAID : GEOM_RAID: Promise: Subdisk kjihgfedcba`_^]\[ZYXWVUTSRQPONM:0-ada0 state changed from NONE to ACTIVE The trick is that I've never setup any kind of RAID on that old box... Is there a way to completely disable GEOM_RAID loading on boot ?