similar to: E100P setup in Switzerland

Hi all, Just a little note for the records and archives. We see many small glitches / troubles in the mailing-list but rarely success stories ... Here's one : Asterisk is running perfectly fine in our setup : Debian 3.0 stable / Athlon 1.8, 256 MB Ram / Digium E-100P / Swisscom PRI isdn We have 6 companies (more to come) sharing the system in the building with a total of about 20

Hello. I can't find a gsm plugin for XMMS. How do Unix, Linux, BSD users listen to gsm samples ? Regards...Martin -- While you don't greatly need the outside world, it's still very reassuring to know that it's still there.

Hi all ! What is the current status of the Dialogic channel driver ? Is it available ? Is it commercial ?? Any info ? Thanks

Hello, I would like to make sure I am not going to shoot myself in the head, so I would appreciate if you could tell me if what I am willing to do is realistic (and will work) or not. I am willing to replace our office "London" phone system when a new E1 (G703) is installed later this month and I have the choice between using asterisk or a more classical hardware PBX. The planned

I've been googling and reading a lot, but I'm not getting any closer to getting an SMS sent via Asterisk. Prior to switching to asterisk, I used sms_client on an ISDN line to dial one of two Swisscom SMS centers: 0900900941 or 0794998990. My dialplan looks like this: exten => 0900900941,1,Goto(smsmotx,${CALLERIDNUM},1) exten => 0794998990,1,Goto(smsmotx,${CALLERIDNUM},1) ;

Has anyone a working /etc/asterisk/capi.conf example for Germany or Switzerland using the AVM C4 - ISDN Card. I try to connect asterisk to 3 wires BRI-ISDN (Swisscom). I appreciate your help and it would save me a lot of time, figuring it out by myself. regards, Claudio

I don't know if this is already common knowledge, and it's not specificly for Asterisk, but if you are using Cisco phones and want to roll XML applications, make sure you have "Connection: close" in your HTTP header. Without it screen loads are very sluggish. In PHP, do: header("Connection: close"); I whipped up quick-and-dirty PHP/MySQL/Cisco XML directory and

O.K. thanks a lot, Felix and Peer Oliver. But somehow asterisk keeps telling me while startup: [chan_capi.so] => (Common ISDN API for Asterisk) Jan 24 14:30:47 NOTICE[9796]: chan_capi.c:3271 load_module: Unused contr1 Jan 24 14:30:47 NOTICE[9796]: chan_capi.c:3271 load_module: Unused contr2 Jan 24 14:30:47 NOTICE[9796]: chan_capi.c:3271 load_module: Unused contr3 Jan 24 14:30:47

Hello, I made an interesting observation related to the "Clocksource tsc unstable (delta = -2999660320319 ns)" problem. In the log of ntpd I found: Oct 5 03:46:35 greenville-dom0 ntpd[4020]: kernel time sync status change 6001 Oct 5 04:03:41 greenville-dom0 ntpd[4020]: kernel time sync status change 2001 Oct 5 05:29:03 greenville-dom0 ntpd[4020]: kernel time sync status change

Hi- Perhaps someone with an E100P in hand can answer this: I just received an E100P from Digium (I normally buy quad boards) I noticed that the circuit board says "T100P" on it, and I assume that the T100P and E100P both use the same circuit board. Can someone please confirm that their E100P says "T100P" on the artwork? Thanks Scott Scott M. Stingel Emerging Voice

hi see below's conversation. it seems the e100p card doesn't work with BT. Any idea how this'll work against Telenor (norway)? roy <RoyK> does anyone know if I can trust the E100P to do full PRI stuff in .no? <cypromis> dunno about no <cypromis> I cannot use it in UK <cypromis> cause the framer has problems with system-x switches at bt

Hello, I have a E100P card from digium and I try to implement a conference bridge in asterisk. I wonder since I got the E100P card do I still need to load ztdummy for caller from h323 endpoints to work with Meetme? I load the E100P driver but i did not load the ztdummy driver. My h323 caller does not hear any voice play by Meetme. Looks like ztdummy is required as long as h323 is concern and

hi All, quit new to asterisk, can anybody tell me whether Wildcard E400P and Wildcard E100P support R2 CAS protocol. if they do, what is the value, i should set to 'signalling' parameter in the zapata.conf file? Surajee -------------- next part -------------- An HTML attachment was scrubbed... URL:

All, I'd like to buy an E100P Wildcard frm Digium, but i prefer to buy it in Europe (costs, ...). Could somebody point me to an european reseller ? Thanks in advance. -- Nicolas Cartron nc@ncartron.org

Hello, Thanks to members of the list things changed on my installation (asterisk + digium E100P with of course an E1 line). Here is my zaptel.conf : - span=1,1,0,ccs,hdb3 bchan=1-15,17-31 dchan=16 loadzone=fr defaultzone=fr - Output of zttool: - Alarms Span YEL/RED Digium Wildcard E100P E1/PRA Card 0 - [root@asterisk root]# head /proc/zaptel/1 Span 1: WCT1/0 "Digium

Hi ! I am trying to configure two E100P cards, but I am a bit confused with zapta.conf in what I am trying to achieve. The * will be connected to a pstn switch with two E1 PRI lines. The E1 lines will be used for incoming calls as well as outgoing calls. My problem now is what to put in zapta.conf, I would like to group all channels from both cards together (if that's possible). Does this

Just cross pairs 1-2 and 4-5 1 <--> 4 2 <--> 5 Never done an E1, but I think it's the same for a T1 4 wire cable. Tim Thompson Commercial Sales Engineer http://www.amatechtel.com (806) 722-2227 -----Original Message----- From: bam [mailto:bam@cqm.co.uk] Sent: Monday, December 29, 2003 9:12 AM To: asterisk-users@lists.digium.com Subject: [Asterisk-Users] E100P pinouts

Hi, i just received an E100P, this is the first one I have ever seen, and notice that the board reads T100P. Is this right ? The antistatic bag had a small label that has E100P written on it, and the card is a bit different than the T100P I already have, Does Digium use the same boards for both cards ? I don't have an E1 link here, can I test the card just by loading the driver and run

Hello list, i've got some problems getting a E1 line with a E100P up and running (germany). # cat /proc/zaptel/1 Span 1: WCT1/0 "Digium Wildcard E100P E1/PRA Card 0" HDB3/CCS/CRC4 YELLOW RED "YELLOW RED" sounds not so good. When launching asterisk, enabling pri debug on that span, i see outgoing attempts: ;---------- snip -------- > [00 01 7f ] > Unnumbered

Hi, I'm installing my first E100P. My zaptel reads the following: Span=1,0,0,ccs,hdb3,crc4 E&m=1-31 My Zapata.conf reads the following: Signaling = em_w Channel =1-15 Channel =16-31 After starting the zapter service I get: ZT_SPANCONFIG failed on span 1: No such device or address (6) ??? PauloHM -------------- next part -------------- An HTML attachment was scrubbed...