similar to: Audiocodes gateway and asterisk

Is anyone out there using an "AudioCodes MP108 8-Port FXO Analog Gateway (SIP)" with asterisk to support both inbound and outbound calling? If so, I'm interested to hear how it works, and I'd love to see some example confs (both in sip.conf and on the MP108). This product has been recommended to me by a SNOM/Asterisk-friendly distributor, but I would like a second opinion

Can anyone tell me the features of the Cisco 7905 with SIP? I mean things like number of lines, speakerphone, transfer buttons, etc. I've seen the Cisco material, but all it told me was how nifty it is and how wonderful the XML interface will be ;) Thanks, --Ernest

I bought a couple of Mediatrix 1204's a few of months back. (Perceived advantages were relatively low overall cost and size per port, and it isn't nearly as vibration sensitive as a PC would be.) Rich Adamson's review from Feb 1 is comprehensive, and the only thing I'd like to add is this: One "feature" of these units that absolutely infuriates me is its behavior for

Hi all! I updated my snom200 to 2.02t and now MOH from * don?t works anymore... only the MOH from snom server and if i clear the MOH server field in the phone i have no MOH at all..( with the transfer button, moh plays using a extension). Someone with that problem? I downgrade to 2.01s but nothing changes. Miklos -------------- next part -------------- An HTML attachment was scrubbed... URL:

I'm using the SNOM 200 latest SIP beta (so that I can have the GSM codec, etc). Everything seems to be working fine, but the music on hold doesn't play when I use the HOLD button on the snom. Any suggestions? Thanks, --Ernest

I'm testing out my SNOM 200 phone by trying to call out through NuFone. When I do so, I don't hear an echo at all (in fact I can't hear myself through the phone) but the callee can hear an echo when she speaks. NuFone tells me their network is totally digital and so can't be involved in an echo. This is all well and good, but the echo is still there. Any suggestions? As a

Hello, I'm helping a colleague (*) which has the following setup: ITSP --- <T.38 capable PJSIP trunk> --- Asterisk 13 --- <PJSIP>-- Audiocodes MP-112 --- <FXO/FXS> --- Fax machine My issue is the following : Audiocodes gateway reject INVITEs with 488 Not Acceptable Here It seems this gateway requires t38 settings to be present in SDP body in the very first INVITE. My

In response to the postings by Andrew Kohlsmith and Ernest W. Lessenger: Andrew, I modified the exten line in extensions.conf as you suggested. Unfortunately, It still does not work... Ernest, I spent approx. 4 hours reading list archives (and anything else Google served up) on how to configure iax.conf and extensions.conf to work with Voicepulse. Then, I sent an email to voicepulse

Hi List, I am trying to call from my asterisk box (1.2.18) to and audiocodes MP114. I keep getting an error from asterisk of -- Got SIP response 415 "Unsupported Media Type" back from XXX.XXX.XX.XX. Both box's are set up to use G729. Anyone have a hint as to what it may be ? Thanks. Dovid -------------- next part -------------- An HTML attachment was scrubbed... URL:

I have some Audiocodes units which appear to be running Linux, according to the unit's own "System Log" kern.warn Linux version 2.4.21openrg-rmk1 #2 Wed Aug 30 17:05:29 IDT 2006 However my contact at Audiocodes claims otherwise On 12/4/06, Yaniv Nizan <Yaniv.Nizan@audiocodes.com> wrote: > > > > I doubt that we are running Linux on the MP-202. Perhaps there is a

Has anyone used the AudioCodes MP-20x? http://audiocodes.com/Objects/Analog_Telephone_Adapter_Series_MP_20X.pdf Seems like a good device, but I can't seem to find anyone actually using them... -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20061022/6ca85b8c/attachment.htm

Is anyone on this list using and audiocodes FXO gateway? I have Asterisk(1.07 on OS X) setup and working fine, including SIP phones and IAX2 phones - I can make outbound calls just fine and receive inbound calls just fine. However, I can't seem to find the right series of DTMF settings on the AudioCodes to allow DTMF tones to be sent after an outbound call is connected(phone banking,

Does anyone have any information for me? Welinghton. Citando Welinghton Magno Guimaraes <welinghton.guimaraes at ufvjm.edu.br>: > Hello! > ? > I am setting up an Asterisk server with a Mediant 1000 (Audiocodes) > to make external links. Does anyone have any manual or instructions on > how to proceed? > ? > Asterisk ?=>? Mediant 1000 (AudioCodes) ?=>?

Ernest, I hadn't thought of doing that, though having that added protection would be nice. However, what I'm trying to do it have an incoming call at my home number follow me to my cell phone for selected numbers -- Since I already have three way calling, I'd like get Asterisk to essentially three way my cell phone into the call (or my office number, etc.) I understand the

Just a question, has anyone knows how to blank or factory reset an AudioCodes MP124-C/FSX/AC/SIP unit (it's a 24 FSX to SIP unit). I purchased them second-handed with no manuals (thank god for the internet!!) but i guess the pdf manual I have does not have the section of factory-reset. Also, any sucess stories with: AudioCodes MP124-C/FSX/AC/SIP

I have AudioCodes MP-114 and I'm trying to configure SAS (Stand Alone Survivability); when Asterisk is down the MediaPack gateway should forward the call IN/OUT through the gateway (without asterisk in the middle), but it is not working. I'm working with tech. support from the source I purchase the unit from they we are just emailing back and forth and the unit is still not working. Can

*** Now you just need a "phone" or "station" (FXS) device and a method of connecting it. *** So... essentially I need to spend another $125 US on a Wildcard TDM400P so I can plug in an analog phone? On the X100P description it says: "The X100P supports FXS Loopstart and "Kewlstart" (Loopstart with far end disconnection supervision). It can detect ringing and

Hello, I am trying the setup the TDM01B card. 1 FXO. I connected it to a regular home line. in the /etc/zaptel.conf, I have fxsls=4 In the /etc/asterisk/zapata.conf I have: signaling=fxs_ls language=en group=1 context=default channel => 4 When I start asterisk, I get this error: ERROR[10376]: chan_zap.c:6584 mkintf; Signaling requested on channel 4 is FXO Loopstart but line is in FXS

Jerry and Michael, many many thanks for your posts. Erick. On 5/24/06, The VoIP Connection <asterisk-biz@thevoipconnection.com> wrote: > Here are the step by step instructions for setting up a brand new Audiocodes > FXS gateway for use with an Asterisk server: > > Connect the gateway to a network switch and connect a computer to the same > switch. Then configure the IP

I'm having problem passing Caller ID to asterisk from AudioCodes MP-114 (FXO) AudioCodes is passing the caller ID to Asterisk but Asterisk is trying to interpret it as authentication: [Dec 31 11:41:07] WARNING[9752]: chan_sip.c:8553 check_auth: username mismatch, have <pstn-5665>, digest has <pstn-1270> [Dec 31 11:41:07] NOTICE[9752]: chan_sip.c:14316 handle_request_invite: