similar to: (still) channel problems

Hullo again, all :) If you're using * to run telephony in a real business environment, can I trouble you to write a short paragraph about the setup, and how you've found the migration / daily use? I'm simply trying to add weight to the business case for new * installs, especially for those who have a very conservative management structure. Like I say, I'm not looking for a case

Hello, Did anybody successfully tried upgrade Adtran TSU 600 to firmware which is working properly with T100P and asterisk ? B.

Hi All I have 3 GrandStream BudgeTone-100's which connect to an * box with a HFC-S based ISDN card using ISDN4Linux. I have setup the BudgeTone-100's to use Early Dial which for calling between the three phones works well, but for the external calls using the following extension exten => _9.,1,Dial(Modem/g1:${EXTEN:1}) Only the first digit is dial on the ISDN Line. Does anyone know of

I'm using tftp server that automatically loads on each reboot, for some reason the last 2 files fail to load each time. (and I think this has always been the case) Aborted 192.168.16.32 C:\Program Files\TFTP Desktop\1.0.5.18\cfg000b82005c24 Octet, Send 192.168.16.20 25 Jan 18:25 Error Aborted 192.168.16.32 C:\Program Files\TFTP

Hi Just recieved the above phone Does anyone have sip.conf and extension.conf example for the SIP phone working with the FXS w100p and the FXO tdm400d any help would be appreciated Thanks Robb

Hi, I'm trying to build a call center application that allows attendants to come in the morning and dial a certain extension to make their extension available. I wouldn't like to use the AgentLogin app because their line would need to stay off-hook (is this correct?) Is there any SET channel status command that would allow me to do something like this? PauloHM -------------- next

Count me in too. -----Original Message----- From: sip [mailto:sip@intology.com] Sent: Friday, October 17, 2003 1:56 PM To: asterisk-users@lists.digium.com Subject: Re: [Asterisk-Users] Beta testers for visual configuration tool for asterisk count me in ----- Original Message ----- From: "Paulo Mannheimer" <paulohm@instant.com.br> To: <asterisk-users@lists.digium.com>

Hi, I'm having random hangup problems with zap channels. If I turn busydetect off in Zapata.conf, * fails completely to detect a user hangup in the middle of a script. On the other hand, if I turn it on, everything works much better, but long calls tend to be hung up without a motive. Any other parameter that I can try? Any #define that I can tweak and recompile? Will callprogress

Hi, I'm trying to use iaxcomm. I can place a call from the softphone, but when I place a call to it, when I answer I get ... NOTICE[16401]: File channel.c, Line 1094 (ast_read): Dropping incompatible voice frame on IAX2[paulohm]/3 of format GSM since our native format has changed to ALAW My iax.conf looks like this .. [paulohm] type=friend host=dynamic username=... secret=...

Hi All, Can anyone tell me what are the <dev1> <dev2> parameters that I should use to run pridump? I took a look at the source code but couldn't figure this one out. Best, PauloHM

Hi All, We've been developing for a while an IDE for Asterisk, and the time has come to open it for beta testers. You can check at www.instant.com.br/viv.html for a snapshot of the application. Current modules are Dialplan and VoiceMail configuration. As you may see, it is all-visual, with drag and drop support and integrated sound recording, saving and cross-checking, so you dialpland

Hi, I'm testing an E1 with E&M signaling. Some of the problems I'm running into are the following: 1) if I try to configure any channel above channel 15, I start getting a "multiframe alignment error" on my telco test equipment. So I have my zaptel file only configured for 15 channels, like this span=1,1,0,cas,hdb3 e&m=1-15 2) When the test equipment tries to send me

I just got a Budgetone 101 and I have it hooked to my * box. I thought I'd read somewhere that we can program the buttons on these phones to send DTMF tones, thereby effectively programming them. However, according to the user's manual, they have predefined SIP functionality. My dialplan implements the festures I want (transfer, message, stuff like that), so for uniformity, I'd just

Hi all, We are about to make our first channel bank install. This will be a one PRI outside connection and up to 70 extensions. As the schedule (and the budget) is pretty tight, I would like to learn a little bit more about general experiences with channel banks, like echo cancellation problems, Caller ID usage, etc. TIA, Paulohm

Hi, we are setting a 120-channel conference server and would like to learn if someone already did this (hardware, problems, etc...) Best regards, PauloHM

Hi, I'm installing my first E100P. My zaptel reads the following: Span=1,0,0,ccs,hdb3,crc4 E&m=1-31 My Zapata.conf reads the following: Signaling = em_w Channel =1-15 Channel =16-31 After starting the zapter service I get: ZT_SPANCONFIG failed on span 1: No such device or address (6) ??? PauloHM -------------- next part -------------- An HTML attachment was scrubbed...

Hi All, Does anyone have any experience with the ArrayCom VoIP phone? I bought one a couple of weeks ago, it used to work quite well with * until I misconfigured one option. I now cannot make it work anymore, because the phone boots up, doesn't find a valid SIP gateway, resets itself and keeps rebooting indefinetely ;-( Their technical support refuses to answer my questions. Any hint on a

Hi All- I'm working on a project that will have remote (internet)access to an * server through SIP phones, either soft or hard ones. Does anyone have any experience to share about which SIP product they are using under similar conditions, as well as which codec is being used and bandwidth usage? TIA! PauloHM

Hi, I?m having a serious problem at one customer. After 6 hours answering a PRI line, * stops responding in a very similar situation as described here ... http://lists.digium.com/pipermail/asterisk-users/2003-July/015391.html I took a look at "/proc/first * PID/fd" and there are hundreds of file descriptors; If I try to connect using asterisk -r I get the "broken pipe"

Hi folks, There was a bug with the GotoIfTime built-in command, under certain circumstances a variable contained garbage, screwing up correct time identification. I'm submitting now a patch to Mark so this can be fixed. PauloHM -------------- next part -------------- An HTML attachment was scrubbed... URL: