similar to: FCC/Euro/Aussie approvals on TE410P

I hate to bring this thread back to life, but... > it may be possible to get it supported, do you think the price >point is remotely competitive with Digium hardware? Also as I am not >about to divulge my information to them to look in the downloads >section, what is the licensing of their SDK? What is the licensing of >the driver? > >Steven >On Tue, 2002-11-26 at 14:52,

Just a couple of questions for Aussie users/resellers! I have only just started to look at asterisk a couple of weeks ago and have found some very intresting discussions and some useful info on what can and can?t be done with it and technology. The questions i have is, Are there people using it is Aussie?( I would say yes so prob answered my own question ) :) Hardware, is the digium

Since i'm sure there are others out there in the same position as me, being disappointed that the original T400P and E400P cards are no longer available from Digium, I thought I would pass on a place I found to get them. I needed the older card, since I didn't want to have to get a motherboard with 3.3v pci slots on it.

Where can I get E1 and/or Euro-ISDN specifications/data sheets? Are there specs for other E./G./Q./etc. protocols as well? Thanks!

Hi list, I use Dovecot's Pigeonhole Sieve implementation, and there is one little feature I'm missing: When a vacation message is sent, I'd like to keep a copy of that message in my "sent" mailbox. There is an RFC draft (draft-ietf-extra-sieve-fcc-09) for this, which adds a ":fcc" argument to vacation, but apparently it's not supported by Pigeonhole. I

Hi! Is there anyone that are using a E1-channelbank and have any tips about some type? Im looking at the TE410P and use one port for a PRI (Euro-ISDN, I think we're using some slightly modified version here in Sweden, but I'll check that tomorrow) and connect one port to a channelbank for 30 analogue telephones. It would also be great to get callerid on the analogue phones, so it would

http://yro.slashdot.org/article.pl?sid=04/08/04/2212251&tid=158&tid=95&tid=103 Probably some of you already saw this. Now, beyond discussions regarding the legitimacy of such a ruling (whether they have the legal, moral or whatever right to enforce it), there's the technical aspect. Suppose i provide VoIP services using Asterisk, and i fall under the incidence of the FCC ruling

I don't understand why so many government sites fail to provide some sort of feed to their daily bulletins. What I am venting about in specific are the Canadian CRTC and FCC sites, every day I have to go to the website and when I reach the content, usually it isn't even HTML but a Word or PDF file. So finally today I decided to do something about it and wrote a little app that scrapes

Hi Stephan, Thanks for your answer! > >> I use Dovecot's Pigeonhole Sieve implementation, and there is one >> little feature I'm missing:? When a vacation message is sent, I'd like >> to keep a copy of that message in my "sent" mailbox. >> >> There is an RFC draft (draft-ietf-extra-sieve-fcc-09) for this, which >> adds a

Hi, I am having some problems mentioned below, the box is in production live environment with traffic around 30 - 100 calls. I am running T/E410P in a Dual P4 xeon with HT disabled. I am using zaptel 0.9.0 and asterisk stable 1 release. There is no gui, just mysql, perl (small script) and asterisk. System runs very smoothly if the calls are around 40-50 and comes one by one , however sometimes

hi guys, do you have any suggestions on how to connect 2 TE410P via E1? (for simulation and testing purposes) asterisk1 --> TE410P ----> ? ---------> ? ---->TE410P -->asterisk2 -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20030907/698cd499/attachment.htm

Hi, I found E400P quad PRI card quite cheap (749USD): http://www.govarion.com/product_info.php?cPath=1&products_id=2&osCsid=68cdd6e3d08754 in comparison to te410p (approx 1500 USD ) http://www.digium.com/index.php?menu=product_detail&category=hardware&product=TE410P Now newer generation with HW echo canceling emerged (te411p). I'm not sure in what things those two cards

I have a TE410P running on CentOS 4 which (fortunately) is my test system. This card has been working flawlessly for the past few weeks. Today I did a cvs update to the latest head files, and the card is now not working. When I try a zaptel start, a series of messages appears on the console: Found TE410p at base address fdff0000, remapped to f8a34000 TE410P version c01a010b, burst ON, slip

Max TE410P card on an Asterisk Hello, Does anybody know the max number of TE410P/TE405P card we can put in an asterisk box? Thanks. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040504/f220d3ae/attachment.htm

Is digium gear AUSTEL approved? $25,000 fine for using equpment not approved by the Aussie gov't. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20030713/d8df8091/attachment.htm

for today we only have experience with BRI applications together with asterisk. is the following scenario possible and stable enough for production? FYI : We want to build a unified messaging application integrated with SIP. We have an E1 connection in Belgium with 100 msn's We would think about having 2 servers : Server A : Asterisk PRI card (Digium TE410P) Server B : Fax

Hi, I've been asked to find a server that is capable of running the Digium TE410P card. We usually get Dell PE servers and after a quick look I think the PE 1800 has the required slot: Six Total: 2 PCI Express (x8 lane & x4 lane); 2 x 64-bit/100MHz PCI-X; 1 x 32-bit/33MHz PCI (5v) and 1 x 64-bit/66MHz PCI Has anyone got this hardware, does it work with the card and asterisk? Thanks,

Dear List i have upgrade my * box with the latest CVS version of Asterisk Stable 1.0 and zaptel/libpri my system is MDK9.2 with 1 TE410P and seems work well for now but i have a little amount of traffic (25 IN/OUT calls) i only notice this Warning.. What kind of error is? ------------------------------- Apr 20 21:28:49 WARNING[147466]: chan_zap.c:5979 zt_pri_error: PRI: !! Got reject for

Hi- I have posted a photo of the TE410P Digium card on my site, so that those wishing to purchase a compatible motherboard can see physically what the PCI slot requirement is: http://www.evtmedia.com/TE410P.htm I believe the required slot is a 64-bit, 3.3 Volt PCI, most commonly found on Xeon-based motherboards. A 64-bit slot is longer than the TE410P board requires, but the PCI connector

Hi list, We have been trying to configure a Quad Span T1 card in a system running RH9. We have followed the instructions in the Wiki and searched the mailing lists, but so far havent got any success. Cable is connected to the first span, and module is loaded. Without loading the module the LED glows in red colour, but the moment we load module, it goes off. (No red or green) . We ran zttool