similar to: h.323 - success

hi all I'm trying to setup a dlink dph-100h phone (actually a dph-100m but with the h.323 software) with asterisk and chan_h323. AFACS, the dph-100h software can only be configured to point to a gatekeeper. I know I don't need to do this, but it's a test before I setup my Symbol Netvision phones (I don't have an access point for them now). First, this is what I have, and what

hi all I'm trying to use the manager interface to do some nagios (http://nagios.org/) integration, and I find some parts of it not really optimal. What I'd like to change, is to make \r\n\r\n an actual terminator, something it isn't today, AFACS. Below is the Status output - it shows Response, Message, \r\n, Status post, \r\n, Status post etc etc. Without a parsable terminator, I

hi all after setting up chan_h323, I don't get any ring indications on my Dlink DPH-100H phone. Any idea how to debug this? roy

List, The D'Link phones are not reliable at this time. I am trying to get them fix their Firmware to my specifications. It is half done so far. However there are still hurdles. below email is self explanatory. At present if you want to use these phones, you need to buy D'Link's SIP Server and run this as one of your SIP servers in the blend to call to Asterisk. Seshu Kanuri "G

Hi, list! I'm playing on an Asterisk@home installation, since a month or two. I've had no trouble setting it up 'n running. I've bought a couple of DLINK's DPH-140S SIP Phones, to use with Asterisk. >From this phones, I can make & receive calls with no trouble, but, when I try to use some "interactive" function (eg Directory or Voicemail), the phone seems

Hello Situation: I'm moving from a windows XP box to fedora 11. I used winXP to run skype with a dlink dph-50u USB adaptor so that I could talk on skype with my regular phone. Been working fine for months I'm now on fedora 11, able to run skype linux without problem, even the webcam work! Problem, cannot make the dlink dph-50u to work. After a lot of googling, cannot find anything. I

Hi All, I'm using Asterisk 1.2.14 under openSuSE 10.2 with kernel 2.6.18. I have Wildcard TDM400P card and D-Link DPH-120S and DPH-140S SIP phones. I would like to be able to pickup ringing extention from any SIP phone using Pickup() application. from my dial plan: [incoming] exten => s,1,Dial(SIP/somebody1|60|tTrR) [internal] include => outbound-local include => parkedcalls

Hello gentlemen, I am new here. I have a D-Link DPH-80S SIP phone (it's a non-US model), and I am trying to make it work with Asterisk. I tried versions 1.0.7 and yesterday's CVS and the behavior is the same. The phone registers with no problem, and can accept calls. But when I try to make outgoing call, there is a series of invite requests from the phone, to which asterisk responds

hi IIRC, Jeremy once said that chan_h323 could be used as a gatekeeper but perhaps lacking a few features as compared to gnugk. Is this possible? I have some dlink DPH-100H phoes here for testing, but they require a gatekeeper, and if I can do it, I'd love to keep gnugk out of this. thanks roy

After 20 cups of strong coffee and wasteing most of tonight and obviously doing lots of googling and emailing many people, i've concluded that dlink voip phones specifically DPH-80 dosent work with asterisk. If anyone has had anymore luck with these phones then me please let me know -- regards Vikram

I'm still a learning but I purchased a dph-140s to test with AAH 1.5. I think this is a rebadged ACT P104SLD which others seem to have working with *. It seems to be configured and registered similarly to the softphones I've been using just fine, but it does not receive or send audio (it will send audio to vm), or perform the loopback test. It seems to signal and receive calls fine. The

I've installed (maybe not sucessfully) wine 20041201, fst 1.6 and jack_fst-1.2. I'm using jack-0.99 When I try and execute jack_fst such as: #jack_fst Crystal.dll I receive the following error: err:dosmem:setup_dos_mem Cannot use first megabyte for DOS address space, please report can't connect to JACK I assume that the first error message is from wine. Is that true? I

I have been using the D-Link DPH-540 wireless VOIP handset, and I really like this phone. We had tried the UStarcomm phone, but the phone is used in a noisy environment and the volume wasn't loud enough. The "problem" with the D-Link phone is the Li-ion battery needs to be replaced and D-Link doesn't sell a replacement battery and I haven't found any after-market batteries.

hi all I just setup a new site, perhaps soon a wiki, to collect what's out there of useful backports from Trunk/1.4 beta back to 1.2. Take a look at http://http://www.asterisk-backports.org/ and judge for yourself ;) roy -- Roy Sigurd Karlsbakk roy@karlsbakk.net (+47) 98013356 --- In space, loud sounds, like explosions, are even louder because there is no air to get in the way.

Greetings, I''ve been using ferret with great results now for a while, but in the last week, I''ve been running into some issues. I will occasionally see this message: Exception Message: Lock Error occured at <except.c>:103 in xpop_context Error occured in index.c:5368 - iw_open Couldn''t obtain write lock when opening IndexWriter Which is accompanied by

hi using chan_capi, I get _lots_ of hanging channels after a while. This was first beleived to be SIP related, but I doubt it. below, 'roy' is on MGCP, and 'fax' is just a bridged dial if someone dials in, it's re-routed to another external number roy asterisk1*CLI> show channels Channel (Context Extension Pri ) State Appl. Data

see below I tried to call 98013356 from the following phone (from mgcp.conf) [iptlf03] host = 192.168.33.3 context = default inbanddtmf = 1 callerid = 22545062 line => aaln/1 Console output: == Spawn extension (capiring, 9988001133335566, 1) exited non-zero on 'MGCP/aaln/1@iptlf03-1' -- MGCP mgcp_hangup(MGCP/aaln/1@iptlf03-1) on aaln/1@iptlf03 -- Delete connection 4

hi all when I (using my D-Link DPH-100M MGCP phone) press #, I get told 'transfer'. I dial the new number and after that, * just tells me 'meep meep meep' [hangup] any ideas why? -- Roy Sigurd Karlsbakk, Datavaktmester ProntoTV AS - http://www.pronto.tv/ Tel: +47 9801 3356 Computers are like air conditioners. They stop working when you open Windows.

Hi all We have a 100kVA GE LP Series UPS. I can't find this series in the HCL, but other GE UPSes are listed. Would it be possible to somehow use NUT with this UPS? -- Vennlige hilsener / Best regards roy -- Roy Sigurd Karlsbakk (+47) 98013356 roy at karlsbakk.net http://blogg.karlsbakk.net/ GPG Public key: http://karlsbakk.net/roysigurdkarlsbakk.pubkey.txt -- I all pedagogikk er det

Hi everyone, I am thinking of working on the following ideas for my GSOC proposal based on my discussions with Olly and my own understanding. Rather than focusing on an entire perftest module, I have decided to focus on implementing performance tests for weighting schemes based on a wikipedia dump and in addition to that, build a framework to measure the