hi all when I (using my D-Link DPH-100M MGCP phone) press #, I get told 'transfer'. I dial the new number and after that, * just tells me 'meep meep meep' [hangup] any ideas why? -- Roy Sigurd Karlsbakk, Datavaktmester ProntoTV AS - http://www.pronto.tv/ Tel: +47 9801 3356 Computers are like air conditioners. They stop working when you open Windows.
> when I (using my D-Link DPH-100M MGCP phone) press #, I get told > 'transfer'. I dial the new number and after that, * just tells me 'meep > meep meep' [hangup]I have an idea why: --- mgcp.conf.old 2003-05-20 10:04:44.000000000 +0200 +++ mgcp.conf 2003-05-19 16:20:59.000000000 +0200 @@ -7,6 +7,8 @@ disallow=all allow=ulaw omsn => 22545060 +transfer = yes +threewaycalling=yes ; roy [iptlf01] -- Roy Sigurd Karlsbakk, Datavaktmester ProntoTV AS - http://www.pronto.tv/ Tel: +47 9801 3356 Computers are like air conditioners. They stop working when you open Windows.
*This message was transferred with a trial version of CommuniGate(tm) Pro* Hey all, I had this working but now I don't know what I've done to foul it up. I've been up all nite trying to figure it out and can't see what I've changed. Anywayz, I'm trying to transfer a call using hook-flash. Mainly so I get MOH when transfering and also to announce the call. I've got: threewaycalling = yes transfer = yes in my mgcp.conf file. It worked for me once, but now when I hook-flash on phone (A), I get MOH on the phone (B), but phone (A) gives a short low tone beep, then a short high one. ie, no dialtone. And then it does it each time I press a button on the phone. I can hook-flash back to the conversation no problems. What am I missing here? Regards, Jamie Carl Email: me@jazz-inc.net PH: +61-414-365-466