similar to: [Release] Skinny Support in cvs

Hi, Does anybody knows how to get this work? I have been searching all over and can?t find the way. Using chan_sccp tge phone can log in and has line tone. But the problem is that it is not able to receive nor dial out. Any help would be apprecieted. Thanks Javier --------------------------------- Sell on Yahoo! Auctions - No fees. Bid on great items. -------------- next part

Hello all, I am trying to upgrade the firmware on my cisco 7910 without using CCM. I was told that chan skinny is possibly capable of doing that and would like to make sure. I have P00405000600 firmware which I have put in version in skinny.conf. the phone basiclaly stops at verifying load. tcpdump shows nothing happening apart from small amount of traffic to port 2000 (skinny). Does anyone

Hi, After reading this valuable forum and the voip-info wiki and follow all the steps , but my Cisco 12SP+ remains unregistered. These are my config files: skinny.conf [general] port = 2000 ; Port to bind to, default tcp/2000 bindaddr = 172.20.1.1 ; Address to bind to dateFormat = D-M-Y ; M,D,Y in any order (5 chars max) keepAlive = 120 languaje=es allow = all ; disallow

At the present time you have to have a VALID ip address in bindaddr for Skinny to work. If bindaddr is either 0.0.0.0 or simply commented out all packets requiring the IP address contain 127.0.0.1. I forgot their nick, but someone in IRC recommended we make Asterisk be smart enough not to pick that interface, but I'm not sure of that is the problem or not. I simply have not had the

I am replacing a dead pbx with *. There are four lines I will be using. There is a Cisco 827-4v already in place so I will move the lines from the pbx to it. I am working with Cisco 7910 phones and I understand they use the Skinny/SCCP protocol. I am not sure if I should use chan_skinny or chan_sccp? However my main question is with communication. Do I need to use the same protocol between the

has anyone seen this? -- Starting Skinny session from 192.168.13.102 -- Starting Skinny session from 192.168.13.102 triton*CLI> Oct 15 13:44:05 WARNING[213019]: File chan_skinny.c, Line 2243 (get_input): Skinny Client sent less data than expected. Oct 15 13:44:05 NOTICE[213019]: File chan_skinny.c, Line 2301 (skinny_session): Skinny Session returned: Success Oct 15 13:44:05

Hi, I have a Cisco 7920 that I'm trying to get working with my * box. When the phone boots it requests XMLDefault.cnf.xml and SEP<MACADDRESSHERE>.cnf. I assume I set the line number, etc in the latter of the two. However I cannot find any reference to how this file is structured. Anyone know? I assume this is why I'm getting the errors below: Oct 17 19:47:24

Hey all, I have set up my cisco 30vip using chan_skinny because chan_sccp wont register. The problem I am having is, everytime a call is sent to the phone Skinny/200@jason it rings once, then asterisk segfaults. heres the output -- Executing Answer("SIP/4437821638-7588", "") in new stack -- Executing Dial("SIP/4437821638-7588",

Hi all: I've got some core dumps with chan_skinny. The client is ATA186 with v2.16.1.ms ata18x (Build 030814a). The * version is CVS-10/05/03-16:03:26. When I make a call, the phone connected with ATA rings only 1 time and * dies. Maybe I have some errores in ATA config. If someone has proven configs for ATA, please send me the details. Thanks in advance, Gus The logs: *CLI> Version

Hello. I have just installed Asterisk on my HP DL140 Fedora Core 1 Server. The server has two interface cards active. I have been unable to fix this error although all DNS lookup works fine. my /etc/host.conf contains order bind,hosts /etc/hosts contains # Do not remove the following line, or various programs # that require network functionality will fail. 127.0.0.1

http://chan-sccp.berlios.de/ 20050713 ftp://ftp.berlios.de/pub/chan-sccp/chan_sccp-20050713.tar.bz2 I didn't have a spare 7960 to use this week, so maybe some line issue is still present. - fixed a memory leak on database updates (dnd, cfwd*) - fixed old memory leak on unload (now unload chan_sccp.so and load chan_sccp.so work. It does reload the config when asterisk is running) - socket

Please forgive me my ignorance ... I've spent two days trying to find out something about the format of the default configuration file, which CCM produces. The only example I have so far is the one from the chan_sccp source. There were tons of references on entering the callmanager commands on a cisco command line - which I don't have (don't need thanks to chan_skinny + chan_sccp).

I have recently played with and did get a working copy of Asterisk functioning in the lab environment. Then when I moved it out of the lab and onto the outside of our firewall it functions as before except that I get a Connected to Asterisk CVS-08/21/04-12:16:04 currently running on 63 (pid = 1478) ??? -- Starting Skinny session from ??.???.114.131 (PIX (6.3) our firewall) Aug 26 14:48:34

Before I got down the path of converting a Cisco 7960 I have over to SIP I wanted to try and set it up using Skinny. The phone registers ok with Asterisk. When I call a SIP softphone extension on my network the call is made and I can answering it. However no voice is heard over the call. When I debug Skinny on the console after the call has connected I see the following messag: Recieved Alarm

Hi again, I found chan_skinny and that seems to work pretty good. the SCCP one filled out all the buttons really nice, but skinny seems to be working. How do I fill out the second line button on the phone with skinny.conf? Thanks much! ...Jeff

Hi, Does anyone have any experience with a Cisco 7961 + 7914 Operator Console setup and speeddials/BLF on Asterisk 1.4? Would appreciate feedback if this works reliably. I have a 7961 on skinny registering on an 1.4.19 box with chan_sccp and speeddials work fine so that part seems ok. I have no experience with the BLF part. >From googling around it seems that BLF on the 7914 only works with

Hi All Will cisco 7910 ip phone compatible with Asterisk? I know that 7960 are fine. David Kwok -------------- next part -------------- A non-text attachment was scrubbed... Name: smime.p7s Type: application/x-pkcs7-signature Size: 1878 bytes Desc: S/MIME Cryptographic Signature Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20040112/e8023f35/smime.bin

Does anyone have the .bin file(s) to convert a Cisco 7940/7960 back to the CallManager image? I want to start playing around with the chan_skinny addition, but it seems the .exe's from cisco want to open a connection to a SQL server or CallManager (which I don't have).

Greetings I was getting bad static crackle on a phone, so I reload from the latest CVS and did a make clean ; make install on zaptel, libpri and asterisk Now I get this error [chan_skinny.so] => (Skinny Client Control Protocol (Skinny)) May 28 13:59:42 WARNING[16384]: chan_skinny.c:2541 reload_config: Unable to get our IP address, Skinny disabled Urgent handler [chan_oss.so] => (OSS

Hi All; Again, the Cisco IP Phones 7942G and using Skinny: I upgraded the firmware to version 8.5 (skinny) and I am using skinny channel (chan_skinny) and the skinny.conf file. The phones are registering, but when we use them to place a call, we only hear tooooooooooo in the handset and we do not hear voice (even when we dial the digits, we only hear toooooooo .. but it dials and destination