similar to: E400P woes

I can't seem to hide and/or set my caller ID from *. I'm using a quite recent (three weeks or so) CVS with an E400P card. I have pridialplan=unknown in zapata.conf and I'm based in the UK. The relevant bit of pri debug looks like this (reformatted to fit 80 char width): > Calling Number (len= 4) [ Ext: 0 > TON: Unknown Number Type (0) >

Hi everybody. We have a problem with the configuration of the card, the cards work and we receive incoming calls but asterisk don't receive dnid. We have 5 servers with 1 E400P with the same problem and the telco told us that we need to configure the card to request it, how we can do this? Can you help me to solve the problem. Best regards, Carlos Fernández Puente carlos.fernandez@alisys.net

hi, I'm trying to configure my newly acquired TE410P card to work as 4 E1 spans. This is supposed to be a drop-in replacement to the earlier E100P card. However, on loading the zaptel module it gets configured as T1 spans basically doing a 'cat' on /proc/zaptel/1 thru 4, it shows 24 channels per span. After this ztcfg fails saying 'ZT_CHANCONFIG failed for channel 97'.

Hi, I have * set up as a PSTN->VoIP gateway (with an E1 with multiple numbers pointing to it). I'd really like to be able to dial out to a SIP server like so: exten => _X.,1,Dial(SIP/${DNID}@hostname) I.e. the remote SIP server receives a SIP INVITE with a "To:" header containing the dialed number (e.g. 02085555555@computer.company.com). This is equivalent to having a

Hi. I'm trying to do some custom call logging, and I want to call an AGI script from a hangup handler to log call durations and things. Although the script executes, it isn't retrieving variables from the AGI interface. Looking closer, I realised the variables are actually getting unset before the h extension is reached. [foo] s,1,SetVar,foo=bar s,2,Play(audio/a-long-prompt)

hi see below's conversation. it seems the e100p card doesn't work with BT. Any idea how this'll work against Telenor (norway)? roy <RoyK> does anyone know if I can trust the E100P to do full PRI stuff in .no? <cypromis> dunno about no <cypromis> I cannot use it in UK <cypromis> cause the framer has problems with system-x switches at bt

asterisk-users Any help will be appreciated. This card did not connect with E1 line how to loop E400P card to test ? now I loop the card. span 1 ---span2 RJ45 pins 1--4 2--5 but show : When calling ,showing error: app_dial.c:764 dial_exec: Unable to create channel of type 'Zap' Asterisk Ready. *CLI> -- Registered SIP '2002' at 192.168.139.59 port 3289 expires 120

Hi people. The latest version of my Ethereal plugin for IAX2 is now available here: - http://almaw.com/ethereal-iax2-plugin-0.3.zip A screenshot showing what you're missing is here: - http://almaw.com/ethereal.png The new version adds the following features/bugfixes: - Decomposes the CODEC fields for supported CODECs, complete with nice English descriptions. This gives you a

As mentioned on the devel list earlier today, I'm interested in writing an IAX2 plugin for Ethereal to make debugging IAX protocol implementation and simultaneous calls on normal networks easier. Anyway, I started work on it this evening, so it's not complete yet, but it's starting to look quite sensible: - http://raq626.uk2net.com/~al/ethereal.png A couple of people have

Hello, I've search through all of the lists and cannot find any descriptions of live monitoring (monitoring a phone call going on between an extension and a zaptel channel live from another extension while the monitoring phone is muted). I am aware of the monitor function which is actually a call recorder, but I'm looking for live monitoring from a muted extension. is this easily

Lets say I have an * at my business, with 7960 SIP phones. All the sip phones are registered using their extension number (like 305), but I would also like to put my SIP URI on my business card and in a name format, not an extension number (like lee.goodman), so that the SIP URI would read lee.goodman@asterisk.company.com. How would I set this up in extensions.conf? I got

Hi, Can someone send me a sample on how to get an E400P working with ISDN PRI signaling? What conf. files must I edit? thanks in advance Eduardo

Please rest assure that I have been following the * development for a while and understand the value the Digium hardware gives me vs any other vendor. Most of the people on this list probably know whats good for everyone else, but I like to find out for myself (I am not a CNN junky). Now the * site mentions Dialogic as supported hardware at: http://www.asterisk.org/index.php?menu=hardware It

I have 7965 and am trying to convert the firmware to SIP (SIP45.8-3-4SR1S). Does anyone have a valid XMLDefault.cnf.xml they could share? I have tried the version at voip-info<info.org/wiki/view/Asterisk+phone+cisco+79x1+xml+configuration+files+for+SIP&view_comment_id=14768#Troubleshooting>for the 7941/7961 but unfortunately /var/log/messages shows in.tftp stops sending after

On 03/11/03 00:25, Mark Spencer wrote: > As a side note, I strongly would like to see someone implement a > client using libiax2 which implements IAX2 instead of the (now > obsolescent) IAX version 1. I'm implementing a Java-based IVR server (and yes, I know Asterisk does IVR, and no, it's not flexible enough to do what I want and no, it doesn't integrate well with the Java

Beginner: How can a script be called after a calling user hangup? What's wrong with this: [incoming] exten => s,1,Playback,welcome exten => s,2,Record,msgfile:gsm exten => h,1,Goto(callscript,1,1) [callscript] exten => 1,1,Wait,5 exten => 1,2,System("SomeScript") Thank you -------------- next part -------------- An HTML attachment was scrubbed... URL:

<P>hi Everyone,</P> <P>We are configuring an ISDN PRI E1 with an E100P card, when you load the drivers, and starts the asterisk, cards also starts fine, givin following output,</P> <P>*CLI> <BR>&nbsp; == D-Channel on span 1 up<BR>&nbsp;&nbsp;&nbsp; -- B-channel 1 successfully restarted on span 1<BR>&nbsp;&nbsp;&nbsp; --

Hi all, Does somebody know how I have to setup my TE405P ? Is it correct my configuration below ? Otherwise, can somebody help me ? Thanks, Angel. zaptel.conf span=1,1,0,ccs,hdb3 span=2,0,1,ccs,hdb3 span=3,0,1,ccs,hdb3 span=4,0,1,ccs,hdb3 bchan=1-15 dchan=16 bchan=17-31 bchan=1-15 dchan=16 bchan=17-31 bchan=1-15 dchan=16 bchan=17-31

Hi all, inside my * is a E400P. The machine is a PII 400Mhz with 256MB Ram. OS is Debian woody. * is the newest cvs co. I have written a little callgen script which make outgoing calls through my *: #! /bin/sh set -e n=$1 # Nummer anz=$2 # Anzhal der Versuche anz2=$3 # Kan?le sle=$4 # Timeout bis zum n?chsten Versuch if [ -z $4 ]; then sle=0 fi s=1

Hi all, I'm about to start setting up my first asterisk/cti system in our test lab. I've read through all the documentation I can find and relevant posts in the list archives but can't seem to find anything explaining how to go about initiating an http request upon an incoming call. I basically want asterisk to request an uri on our intranet, which will pass call details to our