similar to: Final version of ZapScan

All, I know you can use, say, a 2620 w/2 port FXO card as a SIP gateway. Clearly you can use the 5300, 5800, and MGX8850 too. Does anyone know which cards, if any, exist for a 7206VXR to act in a similar capacity, either as a T1/PRI, DS3, or POTS FXO/FXS? What other Cisco routers can act as SIP gateways today? Thanks, Dave

I'm setting up a new AAH 1.0 box to replace my AAH 0.6 box. Though on the new box, I've installed a generic ebay X100P. I don't have my livevoip or voicepulse accounts set up yet on the new box (can both boxes be registered at the same time?). I've set up one IP phone (SPA841) with the new box. I have my SBC POTS line plugged into the fxo card. I set up everything in AMP.

Anybody have any experience pushing XML display data to a Cisco 7960? I am pulling data from a webserver now, but I have stuff, like queue status info, I'd love to be able to push at particular phones. A "pick up the damn phone" push message would be cool too. :) Dave ===================================================================== David C. Troy [dave@toad.net]

Hey folks, I have a T100P card with a PRI; when doing outbound dialing over the PRI, I can use SetCIDNum(2024561414|a) to force caller ID to display as "The White House" on a land line. This is apparently done as a reverse lookup by Verizon, as I do not hand the PRI the words "The White House" -- 202-456-1414 is an actual White House number. Using SetCIDName("Flying

All, I've been doing a lot of work on the Queue application and have some ideas I wanted to get some feedback on. Many people, myself included, have stated their desire for more/better queue statistics. We ought to be able to bring things up to a standard comparable to the established ACD apps. While some basic metrics (completed/abandoned calls, which agents last took a call, etc) can be

Hello, I've search through all of the lists and cannot find any descriptions of live monitoring (monitoring a phone call going on between an extension and a zaptel channel live from another extension while the monitoring phone is muted). I am aware of the monitor function which is actually a call recorder, but I'm looking for live monitoring from a muted extension. is this easily

I'm tring to compile fax applications on Debian system. the spandsp library compiles ok, and when i try to patch the make file in apps directory as is said in the instructions it returns errors. I'm using cvs version of asterisk . -------------------------- voipgw:/usr/src/asterisk/apps# patch < Makefile.patch patching file Makefile Hunk #1 FAILED at 35. Hunk #2 FAILED at 68. 2 out of

I have a pretty basic Mandrake 10.2 w/KDE 3.2 and I installed Asterisk-1.0.1-2mdk. I installed the source of main and contrib from ftp, so at the install time I accepted all the packages needed to be installed too. The installation went smooth, but when I try to execute asterisk (#asterisk -vvv) I encounter few warnings I end with an error. At this point I didn't touch any conf file, I was

I'm trying to install the SPANDSP software into Asterisk to support incoming (mainly) Fax. I'm following the info in http://www.voip-info.org/wiki-Asterisk+Fax. I downloaded and installed the spandsp software from ftp://ftp.opencall.org/pub/spandsp/ and followed the directions in several documents listed on the on the Tiki page. I get down to patch < Makefile.patch that fails with

Anyone successfully implemented a solution for allowing ZapBarge call monitoring only for a specific group of agents calls? The issue I see is that the feature only works on zap channels, and all of the agents (in many cases) are IP phones. Allowing ZapBarge and ZapScan on the TDM PSTN (t100p) interface has privacy issues for senior managers, but would allow all outbound zap calls to be

----- Original Message ----- From: <asterisk-users-request@lists.digium.com> To: <asterisk-users@lists.digium.com> Sent: Saturday, September 13, 2003 7:55 PM Subject: Asterisk-Users digest, Vol 1 #1279 - 16 msgs > Send Asterisk-Users mailing list submissions to > asterisk-users@lists.digium.com > > To subscribe or unsubscribe via the World Wide Web, visit >

When I load the asterisk 1.4 gui and log into "/asterisk/static/config/setup/install.html", it tells me "No Analog ports has been detected on your system". I have 2 Wildcard X100P cards that are properly installed. Ztcfg shows no problems. I also get the following message from the asterisk console " app_system.c:105 system_exec_helper: Unable to execute

Following is the last few lines of output when i try to launch Asterisk:- [app_zapscan.so] => (Scan Zap channels application) == Registered application 'ZapScan' [app_saycountpl.so] => (Say polish counting words) == Registered application 'SayCountPL' [func_cut.so] => (Cut out information from a string) == Registered custom function CUT == Registered custom

I need to get your thoughts on something.. :) I am trying to create a system to process the CDR call logs for department accounting.. I think there are two ways of doing it.. Either I can create an AGI that will run on the "h" extension and will lookup the last entry that matches the account code of the call that just ended in the MySQL CDR and calculate the call cost immediately..

Hi Folks, I've been searching for an specific feature on asterisk and I found an e-mail from "John Todd" asking for the same thing. http://lists.digium.com/pipermail/asterisk-users/2004-May/045882.html To be able to listen (zapbarge, zapscan or chanspy) an specific channel and can talk to one side (the operator). That feature is very usefull in call centers in Brazil so if you want

When I try to connect to * using a Cisco ATA 188 configured with a MGPC firmware (v3.1.1), I just keep getting this message every 30 seconds or so : May 10 10:08:21 NOTICE[7913]: chan_mgcp.c:1509 find_subchannel: Gateway '192.168.1.27' (and thus its endpoint '*') does not exist Using tcpdump, I have checked that the ATA188 (with IP 192.168.1.27 and port 2427) sends UDP packets to

I searched for "say number" in the * google archives and have not found reference to options for "say number". I would like to have * say digits instead of the hundreds and thousands. EG, "1234" would say one two three four.

Is there a way to clear the Queue stats? That is with out restarting *? I'd like to reset them daily and don't see a way to do that. Unless the only way is maybe a cron restart asterisk like every weekday @ 04:00?

Hi everyone! I was wondering... Does the musiconhold quality improve if the mpg123 processes run with a negative priority? If so, is there a way to make them start like that, so I don't have to renice them? Regards, Evert

Hi, Ive been struggling with asterisk for a few days now. I understand pretty much how it works and how to tie things together (SIP -> SIP internally works fine etc), but just cannot get asterisk to work with an X100P clone (its a Ambient MD3200, if that means anything to you guys). I have tried (initially) asterisk 1.07 with zaptel 1.07, and now Asterisk CVS-HEAD with zaptel cvs. Both give