similar to: H.323 channel problems

Hello I am getting ready to install chan_h323. Just updated my * with the latest code from CVS (12/08/03). I was reading the Readme file and confused. Quoted from the README NOTICE: Whatever you do, DO NOT USE distrubution specific installs of Open H.323 and PWLib. In fact you should check to make sure your distro didn't install them for you without your knowledge. Check everything out of

Has anyone here done this? I got it compiled just fine but when I make a call I do not get any audio going either way. The * box is not behind any sort of firewall or nat. My H323 client (gnomemeeting) is behind NAT but I have it set up properly to work through NAT and it will talk correctly with my other regular x86 box running H323. One odd thing I note is that when looking at the UDP traffic

hi all I'm trying to setup a dlink dph-100h phone (actually a dph-100m but with the h.323 software) with asterisk and chan_h323. AFACS, the dph-100h software can only be configured to point to a gatekeeper. I know I don't need to do this, but it's a test before I setup my Symbol Netvision phones (I don't have an access point for them now). First, this is what I have, and what

The gnome2 port is broken? I updated the ports tree two time today, but the result is: rss@DaeMoN:/usr/ports/x11/gnome2> sudo make install clean ===> Installing for gnome2-2.4.0 ===> gnome2-2.4.0 depends on file: /usr/X11R6/libexec/cdplayer_applet2 - found ===> gnome2-2.4.0 depends on executable: gnome-cd - found ===> gnome2-2.4.0 depends on executable: gnome-dictionary -

Hi all! I'm newie to asterisk and I've been trying to make it work in order to use it with Linux softphones (H.323, SIP or IAX, I don't mind) and none hardware phone. I'm using asterisk packages from Debian SID (my distribution), asterisk, asterisk-config, asterisk-sounds, asterisk-h323. I've still not tried with any IAX softphone (gnophone?) but with linphone (SIP) I've

Hi to everyone, I am dealing with my primer Asterisk installation and we are trying to set up a H323 server in order to use Asterisk to place calls between NM clients (also Gnomemeeting). I have a basic extensions.conf file: [general] static=yes writeprotect=no [default] exten =>

I'm having a problem with chan_h323 compiling for Asterisk. RedHat 7.3 PWLIB 1.4.11 pwlib_1.4.11.tar.gz OpenH323 1.11.7 openh323_1.11.7.tar.gz [asterisk@jonux h323]# make clean rm -f *.o *.so core.* [root@jonux h323]# make cc -g -pg -c -o chan_h323.o -pipe -Wall -fPIC -Wmissing-prototypes -Wmissing-declarations -DP_LINUX -D_REENTRANT -D_GNU_SOURCE -march=i686 -DPBYTE_ORDER=PLITTLE_ENDIAN

Use oh323. Download the openh323 and pwlib tarballs from openh323.org Follow Jeremy's instructions in the /asterisk/channels/h323/ directory EXACTLY! good luck Regards, Sean Langley, P.Eng Firmware Engineer General Dynamics Canada (403)730-1482 sean.langley@gdcanada.com > -----Original Message----- > From: Senad Jordanovic [mailto:senad@cwcom.net] > Sent: Friday, September 12,

sorry for top-posting, the two topics started with 2 different reason subject, but then we finished on the same problem. btw,the 2 show channel are reported above: the channel with DTMF working kcenter*CLI> core show channel SIP/pbx2-000004b9 -- General -- Name: SIP/pbx2-000004b9 Type: SIP UniqueID: 1467323106.1275 Caller ID: xxxx Caller ID Name: xxxx

Hi, trying to build the h323 channel driver that comes with asterisk works fine, but only as long as I use openh323-1.11.7. Unfortunately, that setup seems to have a bug which misguides one of the audio streams. (So while * can "hear" me, the phone remains silent.) I suppose that bug is fixed at least in openh323 CVS. At least, I got things mostly working using the external

Hello, Anyone else experiencing problems with the latest spandsp (pre3) and last libtiff beta? I'm getting 8 bytes long file, with the TIFF header only during such connection: -- Accepting call from 'XXXXXXX' to 'YYYYYY' on channel 0/2, span 1 -- Executing SetVar("Zap/2-1", "FAXFILE=/tmp/foch.tif") in new stack -- Executing

I am wondering if anyone has a working install of oh323 on fedora Core2. An replies would be appreciated as we need this urgently. Seshu Kanuri -----Original Message----- From: asterisk-users-admin@lists.digium.com [mailto:asterisk-users-admin@lists.digium.com]On Behalf Of steve@nexusuk.org Sent: Thursday, July 22, 2004 6:12 AM To: asterisk-users@lists.digium.com Subject: Re: [Asterisk-Users]

I've done some reviewing of the archives for G729 and H323 experiences. The landscape of that query isn't pretty - lots of pleas for help, and nor do I see too many "answers." I have a pending bid that requires some data before I can implement * on this particular solution. My question is perhaps a slightly differently worded one than has been asked before, but it may be

Hi all, For those of you people that use Agents (with Agentlogin, not AgentCallbackLogin) on a call center, I have this need: when the agent logs in, a channel keeps running all the time that the agent is logged in to receive the incoming calls. How do I know which agent logged in (code)? Right now, if I query the login channel, there is no information about which agent is logged on: #

Is H323 built into the current CVS? If so, could someone give me an idea of a simple config? thanks, darran -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20030429/fffec1d1/attachment.htm

Hi there ! I searched the whole web to find some helping information about H323 Control Protocol, but there is no way to find that information. We compiled and installed asterisk_0.9.0 + pwlib 1.5.2 + openh323_1.12.2 + 'asterisk-oh323_1.5 channel driver + wrapper' and configured the dialplan for using our H323 Endpoints which are ip200 Innovaphones. Besides, we also use Gnomemeeting but

Hello all, Encouraged by the successful "demo", I'am getting on with Asterisk CVS. I added 2 H.323 extensions in extensions.conf [default] include => demo exten => 701,1,Dial(H323/gm2@192.168.1.20/s) exten => 702,1,Dial(H323/gm2@192.168.1.25/s) With: - [demo] is defined by default in sample.extensions.conf - Asterisk server is running on host 192.168.1.20, on the

Hello to all. I do not know what is causing choppy music on hold when call comes in through E1 card (PRI).. but this channel info is somehow strange.. We use Alaw over PRI (and I think it's format number 8), But why is WriteFormat at 2 ????? Thanks! show channel Zap/1-1 -- General -- Name: Zap/1-1 Type: Zap UniqueID: 1136667936.0 Caller

In my test box I've installed chan_h323 and I've been testing it with Micro$oft netmeeting and openphone with success. I alos have in my installation a Cisco 1700 series router with an FXS card on it. On the router I places the g711-ulaw codec and it worked but I experienced one bad thing. When I made up more than three calls, in the first three calls I was able to transmit and

Heya, I changed the Makefile of the h323-channel-makefile (I downloaded cvs of a couple of hours ago) so that I don't have to rebuild pwlib and openh323, but can use the precompiled versions. I'm using pwlib 1.8.3 and openh323 1.15.2. There aren't many changes. I replaced OPENH323DIR with OPENH323INC ,which points to /usr/include/openh323 for me and OPENH323LIB, which points to