similar to: Brooktrout PRI-ISA48 card... info..

I have wanted to setup an Asterisk system for several months but have been unable to do so because I lacked the funds for a T1 card to connect my channel bank to the server. Recently, I acquired several Brooktrout T1/E1 interface (PRI-PCI48VC/PRI-PCI64V-C) cards for the PCI bus. According to the Brooktrout web site http://www.brooktrout.com/products/netaccess_pri_pci/specs.html Linux

Don't want the opening line of my post to be misconstrued. "Anyone familiar with the BrookTrout TR1034 Fax Board, supports T.38 and PSTN fax in an Asterisk environment?" That's a question, not a statement. Curious if anyone has played with one of these as an extension of an Asterisk server for T.38 faxing, did not mean to imply it could, should or would play well with

HI, I'm trying to config a span from port 2 of a DIgium T410p to a Brooktrout TR114-P8V-T1 card. I have a T1-PRI from the TELCO in port 1 (thru first port) working just fine with Asterisk 1.0.3 - been working fine for some time now. No problem with dialplan PSTN calls. Now I'd like to "route" specific DID numbers in thru the TELCO T1-PRI and out thru the second port (span) on

Does anyone on this list know of any Linux based apps that will work with Dialogic or Brooktrout that provides voice-mail/Autoattendant only?? It seems that Panasonic, Avaya, and Mitel all use Unix/linux based OS on their firmware for their proprietary voice mails. My wish list would be; A software that provides all of the drivers for a dialogic or brooktrout board Voice Mail Messages in WAV

Some guy on eBay is trying to sell the Grandstream Budgetone Phone 101 as the 102D. And to make matters worse he starts the bid at $90.00 Beware. http://search.ebay.com/search/search.dll?query=sip+phone&ht=1&sosortproperty=1&from=R10&BasicSearch= -- Costas Menico Meezon Software Corp 201-224-8111 costas@meezon.com --

I hate to bring this thread back to life, but... > it may be possible to get it supported, do you think the price >point is remotely competitive with Digium hardware? Also as I am not >about to divulge my information to them to look in the downloads >section, what is the licensing of their SDK? What is the licensing of >the driver? > >Steven >On Tue, 2002-11-26 at 14:52,

I have a DID with VoicePulse Connect, but the sound quality is horrible, it is often choppy and the caller's voice cuts out for 2-3 seconds at least once a minute, I have contacted VoicePulse many times, and they do not do anything about it! Does anyone have any similar problems? It isnt my Asterisk config because I have 0 problems using NuFone.

I'm trying to test a Diaglogic BrookTrout SR140 card. It uses H.323. Trying to find a way I could use my laptop to send a fax over H323 to the BrookTrout card for testing. Any thoughts? Normally I'd setup a FXS interface on a Cisco router and setup a h323 dial peer to the BrookTrout, but I didn't the router with me! ----------------------------------------- Disclaimer: This

I have upgraded my grandstream phone from firmware 1.0.3.78 to 10.0.4.30 and now I am having problems with early dial. On the older firmware earlydial worked fine with my asterisk server, but now as soon as I have dialed the number I get a congested tone, and the number 4 flashes up on the LCD screen. Has anyone had this problem, and if so, how do I fix it? -------------- next part

I am running ntpd on the same machine as asterisk in order for the grandstream phones to display the time. After a while the time display fails until the phone is re-booted. Has anyone run into this problem before? Is it simply a bug in the GS firmware? Sean

Hello everyone. This is a message I've sent before on Sunday, no one replied so I'm reposting it (guess not everyone's at work 7/7) I've got this really annoying and beyond-my-knowledge-to-debug problem. The line connected to my FXO port gets marked "out of order" by my telco operator. I don't know how to explain this further. If I dial my own number from a

I am using IAX to send a call to my cell phone. I want to be able to hit # and transfer it back into the office. I have added tTr to the dial command and hitting # prompts me for the transfer, but after I start dialing 103, it stops at 1 and tries to transfer it within nufone instead of my dialplan. This is the debug output: -- Called me@NuFone/1515480XXXX -- Call accepted by

Hello guys, i have been on this mailing list for some weeks now, and i was wondering if someone here has installed linux on the XBOX and use it as a dedicated server. Its a 200 USD computer and could make it perfect to asterisk, its little and doesnt really take much space. My question is could this make it for a stable server??? here are some links i found for linux on XBOX

Hi All, We've been developing for a while an IDE for Asterisk, and the time has come to open it for beta testers. You can check at www.instant.com.br/viv.html for a snapshot of the application. Current modules are Dialplan and VoiceMail configuration. As you may see, it is all-visual, with drag and drop support and integrated sound recording, saving and cross-checking, so you dialpland

Hi All, Can we stop this thread pl. This lady has no intentions to learn asterisk. She is just a troll and wasting our time. With her corporate attitude, what she expects is support that available with paid commercial products. Her company has enough money to buy commercial products, let she go there. Hey lady, whoever u are, dont waste our time. this is not for u. Lets move on to something

Folks, I've been following recent discussions regarding echo and echo training with much interest, since it's a problem we've never been able to eliminate here. We're facing two challenges presently, and they may be related (or not): a) Cisco 7960s in the office here echo back to our staff, but the customer hears decent sound. b) We've yet to be able to pass faxes through

Hi, I would like to set up a high density FAX/PBX server, am looking at using Eicon Diva E1 card with Asterisk and Hylafax sharing channels, is this possible. I know Extensions can be reserved for voice OR fax with the combination of chan_capi used for * voice, capi4hylafax on fax but then channels must be dedicated rather than shared ie. would like to be able to answer voice/fax on same DID.

I still can't get xapian core to build on windows so I guess it is kind of moot to begin with. Just wondering.

Hello all, I'm a newbee and i'd like to test some analog modems i have before purchasing any new hardware. I'm using: - Pentium 500 MHz - Several 56K and 33.6K analog modems (internal and external). - ISDN BRI 1 port card. - A LAN i've successfully tested some SIP sofphones. - An ordinary telephon line (and an ordinary phone :) ). I only modified

I have a question for the group. To get this running do I need any Digium Cards? I understand I will need them to connect to the public phone system. I'm looking at just using IP Phones or IP Softphones just to test this app. Thanks for any help you could give.