Displaying 20 results from an estimated 7000 matches similar to: "PRI Question"
2007 Jun 06
3
1.4 Zaptel/Sangoma Issues on CentOS
Any ideas? Sangoma support is closed for the evening.
I have the latest Sangoma drivers and Asterisk 1.4 everything installed.
When I fire up asterisk, I keep getting "Primary D-Channel on span 1 up"
repeated over and over. The B channels never come up. There are no
errors in any of the logs, zttool, or the wanpipe tools.
Intense pri debug output:
< Unnumbered frame:
< SAPI:
2003 Nov 21
3
PRI problems
I've got a couple of PRIs coming in from a SUMA 4 switch with some 800
numbers routed through it.
When the calls come in, I get the following message on the console and the
call never makes it through:
(800 number is fake)
Extension '8005551212' in context 'nonauthenticated' from '232102749585'
does not exist. Rejecting the call on span 4, channel 1.
I do have the
2010 Jun 21
1
DAHDI: Inbound BRI call, DDI not presented
Hello-
I have a system with one D410P and one B200P (both OpenVox). All is
well with the D410P, inbound and outbound, and I can initiate calls on
the B200P BRI span, but there may be something wrong with my inbound
BRI setup: there is no indication of an inbound call when I dial in to
it from the PSTN.
When I run "pri intense debug" and make a call to the BRI span, I can
see a
2010 May 17
1
PRI down due to chan_zap.c: No more room in scheduler....Got SABME and Sending Unnumbered Acknowledgement...Any thoughts?
Hi Guys,
Running the following with a Sangoma A101D PRI card:
*Asterisk 1.4.21.2*
*LibPRI version: 1.4.10*
No inbound or outbound calls can be made. In fact Asterisk CLI doesn't show
any activity. Problem goes away on restart of the system or maybe asterisk.
I see post about upgrading Libpri to 1.4.10.2 and then I see posts that even
that didn't work. Anyone can weigh in this please?
2009 May 22
2
BT ISDN-30 Pri getting 'stuck' on outgoing calls.
I've having problems with a BT 2 span ISDN-30/Digium TE205P asterisk
setup with outgoing calls not completing and requiring an Asterisk reset
to 'unstick' span 1.
Sorry this is a bit long but I'm completely out of my depth :-(
This system has been in use for some while and I recently upgraded it to
asterisk 1.4.24, zaptel 1.4.11 and libpri 1.4.9. I didn't change
2007 Jun 28
2
E1 not coming up
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Hello List,
since some days i run into the problem that one span on a TE407P is not
comming up correctly. With intense debug on that span i get:
< [ 02 01 7f ]
< Unnumbered frame:
< SAPI: 00 C/R: 1 EA: 0
< TEI: 000 EA: 1
< M3: 3 P/F: 1 M2: 3 11: 3 [ SABME (set asynchronous balanced mode
extended) ]
< 0 bytes of data
2005 Mar 10
7
Panasonic TDA200 E1 -> E100P negotiation issues
Hi, I hope someone can help me with this....
Asterisk 1.0.6 Zaptel 1.0.6 Libpri 1.0.6, 1 Digium E100P card installed
Panasonic TDA200 firmware v2.0.6 E1 Card Firmware 1.0.2
System is located in Australia, so as technologies go, I believe it is twist on the euro standard for the E1 signalling.
Here is the situation.
The TDA E1 card is set in cross over mode and I am using a functional
2005 Jan 09
5
Help in E1-T1 encoding
I have an asterisk with a TE110P configured as T1 which is behind a PSTN
gateway. This gateway has an E1 to PSTN and a T1 to asterisk. This T1 is
configured as Network and * as CPE.
Every call I receive in E1 gateway is directly switched to asterisk using
T1. Remember E1 is alaw. Both E1 and T1 have Natural Microsystems boards
with a very simple software.
When I call to E1 asterisk signalling
2004 Oct 07
1
T100P Pri Audio
I've been working on an asterisk box at work for a few weeks now, things
were finally starting to sail smoothly until I hit this head scratcher
this morning.
It's a rather intricate problem, so bear with me. Heres the scenario.
What works:
If I call from my sip phone -> sip phone everythings ok
If I call from sip phone -> external pots number ok as well
If I map one of our
2007 Mar 20
2
Problem with "AT&T Maintenance" protocol in PRI connection, no B+D channels available
Hi guys,
We are experiencing a problem with a T1 PRI connection. After trying a number of variations in the configuration files, the behavior is always the same: no B channels come up and the D channel doesn't appear to be working well. We can see there are AT&T Maintenance messages being exchanged by asterisk and the provider, CONNECT and CONNECT ACKNOWLEDGE, but that doesn't
2004 Jan 12
1
E100P - connected to Cisco
<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta http-equiv="Content-Type" content="text/html;charset=ISO-8859-1">
<title></title>
</head>
<body text="#000000" bgcolor="#ffffff">
Hi,<br>
<br>
have any one sucessfully connected E100P to Cisco? I am
2006 Mar 11
1
FW: I need to set NO CRC4 on zaptel.conf?
Hi all,
Can somebody help me out, to get the call going through to my provider?
I connected my A104D Sangoma card to E1/isdn and each I tried to make call I
get the errors below.
My protocol analyzer can see only setup info and release complete.
WIRELESS2*CLI> set debug 9
Core debug was 0 and is now 9
WIRELESS2*CLI> pri intense debug span 1
Enabled EXTENSIVE debugging on span 1
T203
2004 Jun 12
2
Sending SABME continuosly. Urgent help needed!
Hi, I'm trying to install an E1 PRI, and I need it working by
Monday, but although everything seems ok, I get no response to calls.
When I make a pri extense debug on span 1, I repeatedly get the
following:
Sending Set Asynchronous Balanced Mode Extended
[ 00 01 7f ]
Unnumbered frame:
SAPI: 00 C/R: 0 EA: 0
TEI: 999 EA: 1
M3: 3
2007 Oct 31
4
PRI over T1 calls dropping, cause 100
I have a T1 link from asterisk 1.2.23 (also tried with 1.4.13) to a Meridian
Option 61C. Calls either way drop with error "Channel 0/23, span 1 got
hangup, cause 100". Can anyone offer insight into the cause and
solution/workaround? (I tried upgrading to Ast 1.4.13, and upgrading
matching zaptel & libpri, put the problem is identical).
For testing, I tried a call from the
2004 Mar 18
4
zaphfc problem
Hi,
I have a partial working installation with zaphfc.
Incoming call :
For incoming call, seems work fine. But the sound is very bad with bounce
short crashing sound. Same sound with echo cancel off or on.
SDA work fine.
Another problem, it's seems that's zaphfc don't reset correctly the line. I
have one of my D channel how was busy even after stop communication.
Outgoing call :
2008 Jun 13
1
PRI crashing Asterisk
I have a user who's system crashes on pri hangup request. Tried 1.4.19.1 and
1.4.20 as well as the latest libpri no change
Progress is as follows......
< Supervisory frame:
< SAPI: 00 C/R: 0 EA: 0
< TEI: 000 EA: 1
< Zero: 0 S: 0 01: 1 [ RR (receive ready) ]
< N(R): 025 P/F: 1
< 0 bytes of data
-- ACKing all packets from 24 to (but not including) 25
-- Since
2014 Aug 01
1
Connecting Asterisk and BT Versatility PBX via NT BRI port
Hi All,
I've a BT Versatility PBX that I want to connect to my asterisk 11.9.0 box via BRI port in NT
mode but actually I wasn't able to get it working. I've another standalone PBX, it's a
Panasonic model, which works fine connected to the same port. The BT connected to a UK
BT BRI line works quite fine after roughly a minute once connected. The PBX can be
seen at
2006 Feb 16
1
Problem making outbound calls on TE210P using NFAS
Hello,
I'm running Asterisk@home 2.5
asterisk 1.2.4
zapatel 1.2.2
libpri 1.2.2
on a Dell Poweredge 2850 (1 CPU) with a TE210P
I have 2 t1 circuits using NFAS with dchan on 24 and no backup dchan. I am able to receive inbound
calls on all channels and can only make outbound calls on channels 25-48.
Attempting to make an outbound call on channels 1-23 results in congestion.
2008 Oct 20
2
ISDN PRI Caller ID problem
Dear All,
I am trying to setup an ISDN line from local telco on a digium card. The
problem I am facing is that I am not getting any caller id from the
telco. They say that they have enabled caller id.
Please help me out.
My zapata.conf
--------------------------------------------------------------------------------------------------------------------
[trunkgroups]
[channels]
2004 Jan 19
2
Lucent and ISDN-PRI
Hi Everyone,
So I have been further exploring the integration of our asterisk server and
our lucent definity g3si system. I took the suggestion of setting up an
isdn-pri line added the two way tie trunk and the signalling group, but
can't seem to get the PRI signalling working on the asterisk correctly. I've
set pri type to network on the lucent, and pri_cpe in zapata on the
asterisk, but