similar to: DTMF modes and external IVR systems over ISDN

I'm using happily this cheap phones, but I still have a little problem. Configuring the phone is extremely easy on * and I've a couple of them perfectly working, except when i try to call some toll-free number (in italy 800xxxxxxx ). If the number called is an IVR system, often with GrandStream (but also with Cisco 7905.h323) it's impossible to make the menu choices via the Dialpad.

Greetings, I need if possibile an explanation on how to manage the incoming callerid for an incoming call. Let me explain the situation: We have two different companies in this office that shares the same PBX (* box). Each company have its own number for the incoming calls. What i'd like to implement is something that, depending on the incoming line that is involved in the call, plays a

I have a North American BRI configured as National ISDN (NI-1) on an SBC (Nortel?) switch. SBC calls this "FastTrak ISDN", and it's surprisingly inexpensive -- less than two POTS lines. I've been trying to find an inexpensive PCI interface solution to connect this to Asterisk as voice lines. I prefer ISDN BRI over POTS lines because of the improved signalling, fast dialing,

Is there any way to run asterisk without a fxo card? I am looking only run SIP and a single fxs card.

Greetings. Today I've installed a fresh new E100P on a EuroISDN PRI. It seems to work well, accepting calls, but, when I start *, I have the screen flooded with this message: PRI got event: 8 (or 6) If i look into /var/log/asterisk/messages i've this Error: File chan_zap.c, Line 5341 (zt_pri_error): PRI: Read on 35 failed: Unknown error 500 Repeated indefinitely. Also, i've a

Hello all, i'm experiencing a list of unpredictables hangup on SIP phones using a PRI E100P Card. All i can see in logs is " WARNING[81931]: File chan_zap.c, Line 5402 (zt_pri_error): PRI: Read on 37 failed: Unknown error 500" I receive a lot of these errors in asterisk/messages. It doesn't seem to be strictly linked to hangups, since i have dozen of these messages per

Hi, I'me trying to write a function that will shuffle a vector. At the moment I'm baically making a vector of randomized indices and then making a new vector from the original one using these random indices. However, is there an alternative (more elegant) method to do this? I tried help.search('shuffle') but it does'nt return anything relevant. Thanks,

Hi All, Actually, I installed Dovecot on an OpenBSD server, however, after properly setting (assumed) the confs, Dovecot does'nt start. I don't know the reason but don't know how to debug. Where is the log about reason for not starting ? Thank you for helping. Regards

On 4/19/11 4:37 PM, Anton Korobeynikov wrote: >> llvm-gcc -O3 -emit-llvm hello.c -c -o hello.bc >> it shows to me i should install llvm-gcc4.5 >> when i have installed llvm-gcc 4.5 i get all the times a wrong bc file >> as output, because when i try to execute it with lli it says to me >> invalid signature. > There is no llvm-gcc 4.5. Report this bug to Ubuntu,

Zhang, Xiantao wrote: >>From 62895ff991d48398a77afdbf7f2bef127e802230 Mon Sep 17 00:00:00 2001 > From: Xiantao Zhang <xiantao.zhang at intel.com> > Date: Fri, 28 Mar 2008 09:49:57 +0800 > Subject: [PATCH] KVM: IA64: Add kvm arch-specific core code for > kvm/ia64. > > kvm_ia64.c is created to handle kvm ia64-specific core logic. > Signed-off-by: Xiantao Zhang

Zhang, Xiantao wrote: >>From 62895ff991d48398a77afdbf7f2bef127e802230 Mon Sep 17 00:00:00 2001 > From: Xiantao Zhang <xiantao.zhang at intel.com> > Date: Fri, 28 Mar 2008 09:49:57 +0800 > Subject: [PATCH] KVM: IA64: Add kvm arch-specific core code for > kvm/ia64. > > kvm_ia64.c is created to handle kvm ia64-specific core logic. > Signed-off-by: Xiantao Zhang

Hi, I currently use? Asterisk 1.0.7-BRIstuffed-0.2.0-RC7k on a debian sarge with a kernel 2.4.27 on a P4 3Gig with 1Gig of memory When i use i4l on any call, the called party ( on the telco operator side ) ear me with a delay of 1 sec after 1 minutes , 2 sec after 3 minutes and so on... After a quart hour, the delay make the conversation just

hello! I use flac 1.0.2 with xmms 1.2.5 . The problem appears when I use the scroll bar to listen a few second forward in the song ("seek to ..."). Then xmms does'nt react and stops playing music for a few seconds. After these few second xmms works fine again and plays the song. The length of these pause is longer when I want to listen near the end of the song; its shorter when

I need help creating a channel for my phone device (Quicknet PhoneJack). I have installed and loaded the driver and phone devices listen in /dev (phone0 - phone15). [phone.conf] mode=dialtone format=slinear device => /dev/phone0 fxoks=2 ;Quicknet PhoneJack [extensions.conf] ... exten=>_NXXNXXXXXX,1,Dial,Phone/phone0 ... When I try to make a call, I get the following output: Executing

>>  i would like to add the value of  the size od a basic bloc to this >>> global variable >>> how to convert the size of a basic bloc to integer? >> >> Size = number of LLVM IR instructions there? If yes, just grab the >> number, convert it to ConstantIn and use as an initializer / store to >> variable. >> > > There's a typo in the

I've to project and build a fresh new box with * on. Basically, i'll have this situation: The office is connected to the phone carrier with a PRI. I need to let users continue to use their analog phones in a office, and an IP-phone based solution on the remote office, that will call using outside using the PRI on the first one. PRI---> Asterisk ---> Analog phones |

After a long working evening yesterday, now my * box place and receive calls with H323,SIP and ISDN line. Calling from the office to an outside line, happens: - If I call a mobile number and the called answers, all goes ok - If I call a number at home/office, and it's answered , all goes ok - If I call a toll-free number with an IVR system, nothing happens: it continues to ring indefinitely

I need to configure an * box to connect to a primary * box which is attached to a PRI in order to make calls using both the same E1 connection. I know the best solution is to use IAX (altough i could connect the IP phones on the remote site directly to the main * box that is VPNed with the remote one). I've some doubt on how to config IAX to work in this situation. I think that: On the

I am trying to cluster some binary data using k-means . As the regular "kmeans" available from stats package in R does'nt provide the option to change the distance method. I was wondering there is any package available to specify type of distance measure to be used in k means clustering in R. Especially distances like "Jaccard" which is good for binary data.

Hello, I know there's quite a lot of topics regarding WoW and Wine, but I did'nt find any where WoW was installed on Windows and trying to run on Linux with WINE. So I have WoW installed on Windows XP (I'm not playing retail but private server if that makes any difference), and exactly it's WoW 3.1.3. When I try to run it with WINE, there appears a black screen, mouse cursor from