similar to: SIP with an iptables fiewall

I've read and experienced the echo problems with the X100P. Is Digium going to fix the problem or refund our money? I want to see this work because myself and other small companies out there use analog lines. I would trade up to T1 but that requires me to have at least 9 lines. If I did trade up, do the T1 cards work perfectly with no echo at all? I get echo with my directly connected

Hi, We have to servers set up in two different networks. We are able to connect calls via IAX and they work perfectly. We do not see caller ID from clients on either side. Our Grandstream phones say Eri and our XTen phones say Asterisk. We did a debug and I am pasting the output from both servers below. We tried setCallerId in several different ways. We see the value get passed to the

It would be nice if Digium updated the hardware compatibility list on asteriskpbx.org to indicate that the LineJACK can't be used for dialing out. I've seen several people on IRC be burned by not knowing this. --Eric -- BTEL Consulting 850-484-4535 x2111 (Office) 504-595-3916 x2111 (Experimental) 877-552-0838 (Backup Phone)

Anyone know what model and what support the new $100 Cisco has? http://biz.yahoo.com/djus/030428/1030001060_1.html -- Steven Critchfield <critch@basesys.com>

I've just down loaded Xten Lite and it is now build 1079. It now finds the NAT firewall type and has loads more to configure. But it doesn't work on my poor W95 tablet PC. -- Dave Cotton Directeur Linux Autrement 193 rue Marcel Cerdan 84270 Vedene 04 90 23 30 81 "Internet Sheriff Technology" revendeur en France <http://www.linuxautrement.com> IAX 17004902330

And it runs linux. http://www.zip4x4.com/ZIP4x4.htm Anyone seen one? bkw

Hello I Installed Asterisk on RedHat 9. I am currently try to configure minimum with two softphone talking to each other over the LAN. I am using X-Lite softphones from xten.com site. I defined 3 phones in sip.conf and also specifies in extensions.conf file. I am able to ring other computer but there is no voice exchange ( i can't hear any think except ring). Here is the portion of sip.conf

As I understand it (and my understanding is obviously incorrect) the switch => statement sells the Asterisk box to resolve (aka lookup) extensions by querying the remote Asterisk server defined in the switch => statement. The switch => statement is used to centralize dialplans. I've not used the switch => statement yet, I'm just trying to understand the ramifications of using

All, I have my * box NAT'd with all ports forwarded that are SIP related (based on Wiki). I also have nat=yes, externalip=WAN address of firewall, internalip=LAN network of *. I have my Xten soft phone on a PC which is NAT'd behind firewall with ports forwarded. I have also followed instructions on Wiki for Xten. I can authenticate fine, and sip show peers shows my extension is OK,

I've made some major changes to the way Asterisk handles file formats. I'd like feedback from people about any experience they have with these changes. They *may* improve playback performance for people who have had trouble with playback performance in the past. Mark

hi there! I have a couple phones connected to a sipura ata and if I go into *- IVR, I press options on the regular phones and it all works fine and dandy. then I connect an xten softphone, a new extension in my dialplan, I dial the ivr, * asks me to dial something to go through it, I press keys on xten, but nothing happens, * just times out through as if I did not press anything! is there some

Hello list, I'm observing what I believe to be inconsistent behaviour regarding "Newstate" AMI events for the "Ringing" state. As such I come to you asking for experience or advice: am I wrong or should I file a bug ? I present you a short introduction which I feel is relevant; however, if you want to go straight to my technical question, please scroll

Guys. Im writing this because Ive checked the wiki, Xten website and read a lot of docs and still cant figure out a way around the NAT issues. Maybe somebody else can give me some ideas from a fresh perpective. My test setup is this: Asterisk -> 2wire homeportal Firewall -> internet Computer with Xten eyebeam The asterisk box and the computer with xten beam are behind the same

I have d/l the iso (*@home 0.9) , built the * box and followed the directions in the * handbook and http://www.geekgazette.com/index.php?option=com_content&task=view&id=2&Itemi d=26. I created extension 200 and verified that * was running fine. Loaded Xten lite, setup the proxy for local ip (10.0.0.201) per the handbook. After turning off the Norton Firewall protection, I am able to

Sorry, I don't remember who was asking about this, but it seems that if you record a video message that contains the send video start, it will actually fire up the remote receive window. I.E. Previously I was using the recording section of voicemail to create my video IVR's. This meant that when I arrived at the section to record the message, I had already clicked send video in Xten.

Maybe its just me but I find this question a little confusing, the tone duration should have no impact on tone recognition and typically in my experience the duration of the tone is defined by how long the user holds down the button !? > -----Original Message----- > From: James Sizemore [mailto:james@deny.org] > Sent: 22 August 2003 17:33 > To: asterisk-users@lists.digium.com >

Dear Guys, I?ve test Xten Lite softphone to connect to my Asterisk Box but it registers all the three lines at the same time and if I try to dial an extension it tries to reach 3 Ext. at the same time, can somebody haved this trouble? and how can I fix it. Also, I ?ll like to have the Xten LITE or PRO Softphone (Lite is free and PRO about $50.00 USD) it can hanle 3 lines (lite) and 6 lines

I get the following message when I dial 74#. Does anyone have any ideas on what might be going on? If I don't require numbers to be terminated with # everything works as expected, but you have to wait for the digit timeout, of course. MESSEGE: DEBUG[1150520624]: File pbx.c, Line 1683 (ast_pbx_run): Oooh, got something to jump out with ('#')! -- Invalid extension '#' in

I'm getting the following message when I start Asterisk: WARNING[1024]: File codec_g729b.c, Line 413 (load_module): Unable to initialize va stuff: -1 Did I mess up the registration key or is something else wrong? --Eric -- BTEL Consulting 850-484-4535 x2111 (Office) 504-595-3916 x2111 (Experimental) 877-552-0838 (Backup Phone)

Licensing info for the G723.1 codec, direct from the holding company that licenses the codec. http://www.dspg.com/technology/LicensePricing.html As you can see they want a LOT of money. This is why I doubt there will ever be G.723.1 codec available fro Asterisk. -- BTEL Consulting 850-484-4535 x2111 (Office) 504-595-3916 x2111 (Experimental) 877-552-0838 (Backup Phone)