Displaying 20 results from an estimated 600 matches similar to: "H3500CW recommendation"
2003 Mar 02
4
Found: inexpensive ADSI phone
I know I heard people looking for inexpensive ADSI phones a while
back. Can't vouch for these guys, but this looks like a reasonable
deal for what perhaps are new phones. No experience with ADSI,
myself, but thought I'd pass it along. These folks also carry the
Nortel analog units that do intercom and 2-line, as has been
discussed in prior threads.
JT
---------------------
2003 Oct 29
6
Nortel PowerTouch 350
I have a question hoping someone can help me with. I just purchased a
350 from http://lktelecom.zoovy.com/product/HPT350. I have been reading
some posts and heard that these phones won't work with Asterisk.. Is
this true? I had a previous Nortel Phone working in this enviroment.
Well anyway here's my problem. The phone keeps ringing.. It won't
stop.. Which makes the phone
2003 Nov 25
2
modem to modem calls through asterisk
Modem connect speeds on calls through * seem to be lower than calls
made through the telephone company lines or our old Rolm PBX. All data
calls have 2 wire analog modems on both ends.
For my set up I have channels of a Zhone channel bank tied to 2 modems.
The Zhone channel bank interfaces my * server with a T400P card.
modem --- Zhone Channel bank - * via T400P card - Zhone channel bank -
2003 Apr 25
2
Zhone + Digium T1 bug (?)
We were just testing forwarding one of our numbers to a VoIP CLEC and ran
into an issue that we've seen before but never figured out the cause of.
It seems if you call us and immediately hang up - or if the call is
forwarded by Verizon (which stills rings about ? of one time) the Zhone
detects the ring and answers the call.. The Zhone however DOESN"T detect
that it's no longer
2004 May 25
1
Zhone Zplex issues
Hey guys,
I've had a working Asterisk setup going for a while now, but am having
problems with the Zhone Zplex 10b thinking that during ringing, an
extension has answered the call when infact it hasn't. This only seems
to happen on some of the ports and doesn't appear to be specific to the
handset.
Does anyone have any suggestions as to how I could go about fixing this
(aside from
2003 Aug 05
1
Zhone Zplex 10 units
Mine has been working well, but the only problem is that it doesn't
support callerid (from the POTS side).
> -----Original Message-----
> From: John Schmerold [mailto:john@katy.com]
> Sent: Tuesday, 5 August 2003 12:37 PM
> To: asterisk-users@lists.digium.com
> Subject: Re: [Asterisk-Users] Zhone Zplex 10 units
>
> Thanks for the Zplex heads up.
>
> Steven
2003 Sep 30
1
Help with Zhone z-plex 10 reset
I've just received a brand new zhone z-plex 10b. At first, I was able to
login using the default (admin/zhone), and started exploring with
the configuration, trying to set it up to work with the TE410P.
Somehow the admin password was changed, but I don't
know what it is anymore. So now I'm stuck at the login prompt, and can't
get back to the CLI.... Is there a way to reset the
2003 Apr 01
7
Line is stuck off hook...
Greetings,
I am running Asterisk with a T100P and a Zhone channel bank for over a month now. For the most part it works fine but from time to time (about once a week) the system will not let go of a line and will play the greeting over and over. Anyone calling gets a busy signal. If I reset Asterisk everything works fine. Has anyone seen this problem before and fixed it? If so what did you do?
2003 Jun 11
2
Configuring zhone zplex to 24 fxs ports
Hi.
I was wondering if the zplex in the dev kit could
be configured to have all fxs ports, instead
of the standard 8 fxo + 16 fxs.
If so, anyone managed to do that?
Matteo.
--
Matteo Brancaleoni
Powered by RedHat Linux 8.0
Linux User #153521
-----BEGIN GEEK CODE BLOCK-----
Version: 3.12
GS d? s:- a- C+++ UL++++ P+ L+++ E- W+++ N++ o K- w--
O- M-- V-- PS PE- Y PGP++ t 5 X+ R tv- b++ DI D+
G e
2003 Jun 05
1
T100P + Capi + Caller ID issue
Hi 2 all.
I've a nice issue my * system.
I have:
asterisk latest cvs
T100P + Zhone cb (3fxo+10fxs used)
Diva Server 4BRI running Capi
a bunch of pots and sip phones
The whole system is running good (thanks to capigod
and Bic. for the help with the Eicon Diva), but there's
a very strange issue when calls arrive on the Diva
and then bridged to the pots on the channel bank:
the voice is not
2004 Jan 10
2
WTB / WTS Voip hardware
I've got a Wildcard T100P along with a Zhone Zplex 10 24S/O which has
been working fine for me now for a while.
These have been pulled out of a working Asterisk installation (as they
were no longer required) to use at home only to find that the fan noise
is too loud. As such I'm looking to sell off this hardware and replace
it with some combination of fanless hardware that will allow me to
2003 Sep 08
6
Channelbanks
Ok, the Zhone sucks and the Adtran 750/850 seems to be a little too
expensive.
Can anyone recommend a decent channelbank that won't break the bank?
TIA,
--
Troy Settle
Pulaski Networks
http://www.psknet.com
540.994.4254 ~ 866.477.5638
Pulaski Chamber 2002 Small Business Of The Year
2003 Apr 21
1
Zhone re-provision
I have just make zhone set2default to factory default setting.
What do i have to do to make T1 interface zhone match with T100P.
2003 Nov 04
1
asterisk and zplex10b (fwd)
hello all,
I still experience the random off-hook on my fxo cxhannels, i am using a
zplex-10b channel bank. which does not allow me to call out.
The situation still persists...this is what i have in the zapata.conf
[channels]
context=internal
context=incoming
context=default
usecallerid=no
usecallwaiting=no
signalling=fxs_ks
channel=1-8
signalling=fxo_ks
channel=16-24
but i still have the the
2008 Feb 12
1
Zhone Channel Bank
This may be a long shot, but I suppose it can't hurt to ask!
I have seen chatter regarding Zhone channel banks amongst the asterisk users
primarily. In all of my searching I am guessing that the majority of people
using the Zhone's are probably reading this, and with the support that I have
seen from Zhone so far this is probably my best bet,
I recently picked one up for a project
2003 Oct 23
1
asterisk and zplex10b
hello * users,
i am using a zplex 10b(8fxosand 16fxs) connected to a T100 digium card,
RH8.0.
soon after running * i get this warning
"file chan_zap.c,line 4155 (ss_thread):CallewrID returned with error on
channel 'zap/7-1'
then executes the other applications itself.
--executing Wait("Zap/7-1","1") in new stack.
-- executing.....
it gives the same warning
2006 Feb 02
1
Zhone channel Banks
I've got a Zhone 24 port FXS to configure. The configuration is
beyond stupid. The people that designed this unit should be chased
down and fired.
I'm going around in circles frigging with all the options. Does
anyone have a config file for this unit that I can use as a starting
point?
-bill
wlloyd@slap.net
2003 Sep 19
1
Budget Hotel PBX
I'm considering using asterisk to replace an existing PBX in a 40 room hotel and
would appreciate any comments, corrections or insight before I begin.
Only 8 PSTN connections are initially required but since the guests need dial-up
internet access in the rooms it has to be Frac-T1 as opposed to using FXO ports on
a channel bank.
IP phones are not an option strictly because of price. The
2004 Jun 07
2
AGI + g729A
Hello....
I have the follow situatuion:
< ISDN >
|
|
V
E100P
|----------------| IAX2 / g729A |----------------| T100P
| Asterisk1 |- - - - - - - - - - - - - - > | Asterisk2 | - - - - -
-> |--------------|
| | | | | Zhone |
----------------- ----------------- ---------------
Here's the situation: I receive calls from the PSTN
2003 Apr 29
3
Two Rings
I've asked this question in the IRC Channel, and have had no happiness
yet :-(
I have incoming lines hooked to asterisk using X100P's. Unfortunately,
when we cal forward our lines using the phone company, the line still
rings about a half of a time. This is enough to get * to start 'simple
switch' and after my 2 second wait, answer the line. Unfortunately, *
doesn't see the