similar to: I Need Consulting Help!

Displaying 20 results from an estimated 10000 matches similar to: "I Need Consulting Help!"

2003 Jun 28
3
CPU power required - Asterisk
Hi- I'm almost embarrassed to ask the following simple question, following John's excellent and rigorous bandwidth analysis (see earlier thread): I have a straightforward Asterisk application, IVR-only (no connections between channels). It will simply decode DTMF's and speak prompts (probably A-Law encoded) on a number of E1 circuits simultaneously. Realistically, how many
2004 Aug 23
6
Dell PowerEdge 750 rackmount
Hi- I have an upcoming order for a bunch of asterisk boxes, and I'm considering using an "assembled" package for the server, instead of building them from components as I usually do. Does anyone have experience with the Dell PowerEdge 750 server, or any other 1U rackmount server for use with asterisk? Thanks in advance Scott Stingel Scott M. Stingel President, Emerging Voice
2004 May 25
8
"Glare" condition - How well does asterisk handle?
Hi- I have an upcoming application that requires use of PRI channels that are primarily used for high-volume incoming traffic, but that are to be used for outbound calling as well. Of course, one option is to have dedicated outbound channels reserved, but this is an inefficient use of channel resources. Normally PBX's are designed to have the CPE yield to an incoming call if a particular
2003 Aug 04
2
Fix for Redhat 9 zombie AGI processes
Hi all- Thanks to Mark Spencer for finding this patch: If you are experiencing leftover zombie processes from your AGI scripts that have terminated, this is apparently due to a RedHat 9 threading issue introduced in a recent update.... To get rid of this, try entering the following line before you start asterisk: export LD_ASSUME_KERNEL=2.4.1 It works for me - I'm still checking to
2003 Dec 04
5
Experiences with Fedora 1
Hi all- Over the past week or two, I've been trying out asterisk under Fedora 1 Linux (RedHat). In my setup (single and dual Xeon motherboards), I have so far had a very good experience in terms of performance. In doing E1 load testing, I've found that Fedora handles heavy load much better than RedHat9, probably because of its better use of the multi-threading capabilities of the Xeon.
2005 Jan 05
0
Asterisk consultant wanted - S. California
Hello- I have a client in Orange County California who will soon need some consulting assistance with their new asterisk system. I've been asked to help them find someone. Skills needed would be, in order of importance: Basic experience configuring and using asterisk, coding experience in Perl, experience with MySQL or equiv., and a knowledge of telephony terminology and
2003 Aug 09
2
Multiple E1 configuration question
Hi all- This question is for those familiar with EuroISDN setup. I have a customer in Europe where I'm going to install an asterisk based system with 4 E1's. The customer will configure them all in one large hunt group. My question is about the E1 channel configuration. I know that usually single E1 spans are set up with 30 channels (1-15 and 17-31) as the voice (bearer) channels and
2003 Sep 04
2
Question about cdr_sql fields
Hello- Is it possible to set the CDR record field called "accountcode" from within the dialplan? Or is there another way to cause this field to be set, preferably without using AGI code. Thanks Scott Scott M. Stingel Emerging Voice Technology Inc. Palo Alto, California and London, England www.evtmedia.com
2003 Sep 08
2
cdr_mysql question: accountcode
Hello- I'm using the "accountcode" field in cdr table to store some temporary information used by my perl scripts. I'm finding that the field seems to be truncated to 19 characters, even though the allocated field in the table is larger (varchar(45)). Anyone familiar with the asterisk sources know where I can make a change to keep this from happening? ie: to allow more
2004 Jan 12
7
3.3v PCI board - TE410P photo
Hi- I have posted a photo of the TE410P Digium card on my site, so that those wishing to purchase a compatible motherboard can see physically what the PCI slot requirement is: http://www.evtmedia.com/TE410P.htm I believe the required slot is a 64-bit, 3.3 Volt PCI, most commonly found on Xeon-based motherboards. A 64-bit slot is longer than the TE410P board requires, but the PCI connector
2003 Jul 14
1
.gsm voice format
Hello- What is the .gsm format? Ie: what's the encoding method and sample rate please? Thanks Scott Scott M. Stingel Emerging Voice Technology Inc. Palo Alto, California and London, England Email: scott@evtmedia.com URL: www.evtmedia.com
2004 Jun 29
2
T100P-E100P circuit board differences
Hi- Perhaps someone with an E100P in hand can answer this: I just received an E100P from Digium (I normally buy quad boards) I noticed that the circuit board says "T100P" on it, and I assume that the T100P and E100P both use the same circuit board. Can someone please confirm that their E100P says "T100P" on the artwork? Thanks Scott Scott M. Stingel Emerging Voice
2003 Jul 23
0
Self-testing E1 cards?
Hi- I've been considering writing some self-test software for several quad-E1 cards that I've just received from Digium. I don't have an E-1 channel bank, so this would be my way of checking that everything hardware-wise is working fine before I head out to the dark and cold confines of my customer's equipment room - to make everything work with their E1's. I was thinking of
2003 Nov 20
2
TE410P ERRORS under load
Hi all- HELP! This is actually a revisit of a problem that I had earlier with E400P's at a customer site. Customer still gets locked up channel problem, but has learned to live with it (channels clear themselves after several minutes). The symptoms, which I believe are directly related: I'm having problems with tons of framing and "read" errors on my E1 connections (and
2004 Jul 20
10
PRI dead in USA?
Hi- Because a majority of my customers are in Europe, I've gotten quite used to working with ISDN (PRI) and BRI on a regular basis. Recently one of my customers asked me if I could terminate a few lines locally here in the USA (California), so I called up SBC to enquire as to how much it would cost to install a BRI here. Although the rates were reasonable (except the installation), I got
2007 Jul 01
0
Rockwell ACD - "Take back and transfer"
Hi all- I have a customer with a Rockwell Spectrum ACD. They wish to connect to an asterisk system using euro-ISDN circuits, and asked me if asterisk supports a feature that they call "Take back and Transfer". This feature allows an IVR (asterisk in this case) to handle a call and then blind-transfer it back through the ACD to another extension- freeing up the asterisk channel.
2003 Nov 20
4
Tuning the Linux kernel?
Hi all- It's often mentioned here that recompiling the Linux kernel may improve the performance of asterisk. My question is: Does re-compiling the kernel have any effect if there are no changes to the configuration? What parameters will typically improve performance? Thanks for any insight! Scott Scott M. Stingel Emerging Voice Technology Inc. Palo Alto, California and London,
2003 Nov 02
2
Good system board to use with TE410P?
Hi- I'm looking for an appropriate system board to power a system with two (2) Digium TE410P cards. Since these cards require the 3.3 volt PCI, I'm considering vendors like Tyan for the motherboard. Can anyone please tell me their experiences with the Tyan i7501 series (Xeon-basd), or recommend an alternate motherboard? Thanks Scott Scott M. Stingel Emerging Voice Technology Inc.
2003 Oct 09
2
* consultant needed - will pay
Thank you for reading this, sorry to waste bandwidth otherwise. I am part of a US company looking for someone to setup a demo IVR system for us. I seem unable with my current knowledge to pull this off myself. The demo is the regular enter your id and validate/repeat/continue methodoligy you put up with in everyday life. I would like to have the validation and other parts done via database
2004 Apr 01
2
PRI integration with Marconi switch
Hello- Has anyone had experience connecting to a Marconi switch (in the UK) using E1-PRI connections (TE410P)? In a new installation, my customer is getting yellow alarms on every channel about every 30 seconds. These alarms clear themselves immediately and then re-occur in another 30 seconds, ad infinitum. I used the same configuration that I've used successfully in the past while talking