similar to: TDM400P > BT

Hi Asterisk Community, I have a development with a TDM11B in it. I am trying to connect this to a exchange line as well as a UK telephone and are looking for some pinout information for the FXS port. Is it the centre 2 pins that at the tip and ring. I have been digging around the Digium site but cannot seem to pick up this info. Any help appreciated. Thanks -- Gary

Hi I'm looking for a pinout for the above. Note this has what i'd call RJ45 sockets (or someone smart can correct me). I need to plug into BT (rj13?). And, yes I've googled (glad I'm not chinese) and have tried the suggested, just plug in a 6 connector rj11 and i didnt work atall. On a side note, I cannot beleive that Digium dont have this information on there site, it

<div><BR>Hello,</div> <div>&nbsp;I bought a TDM400P, and intended to use it with my analog phone, which is RJ11 ofcourse. So, the question now, how do I plug in my RJ11 phone to the TDM400P card, which has an RJ45 interface? Also, since it's an 11B card, I also intend to bring in an analog line into the RJ45, so i am still left with the same question....how do I go

Hi, I'm no phone guy but I've been having quite a bit of fun messing with Asterisk. I just unwrapped my new Wildcard TDM400P (TDM40B) which is the new 4 port FXS PCI card. It has 4 RJ45 connectors and I'd like to hookup 4 regular phones which are RJ11. If I crip RJ45 connectors to the phone cords do I simple use the center two pins (pins 4 and 5)? Thanks, Randy Smith Tiger

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, I've got my developers kit from telappliant and got a machine up and running to become the house phone system. Most things are working now, such as incoming calls, call transfer, call parking, voicemail, etc. The one thing I can't do is make my analog phone ring! I can see the call coming in on the asterisk console and can then pick

I'm a complete Asterisk novice and have an installation based on the Asterisk@HomeCD. I've installed my TDM400P with 2 x FXO & 2 x FXS, but every time I try to dial out, I get a message "No circuits available". Can someone confirm the pinouts for connecting the FXO's to a UK BT Line - I have RJ11 connectors on the back of my TDM400P card, so ideally I'd like to

I have a TDM400P with 3 fxs and 1 fxo ports. I need to know which phone connector corresponds to which module and also which port number. If we are looking at the card with the PCI connector at the bottom, fxs/o modules at the top and the phone jacks on the left - do the phone jacks start at the top or the bottom (top is port 1 or bottom is port 1)? And which phone jack belongs to which

Hello I have played about with a TDM400 card and plugged in some standard analog phones. I am using the card in FXS mode - for analog extensions. I did notice that one of my phones did not ring and I wondered why. I later read in Paul Mahler's book VoIP Telephony with Asterisk that in his section on the TDM400 on page 127 he says "In the UK, you may need an adapter that provides a

Hi, Quick question to all the electronics gurus out there.. I unpacked my second GS phone yesterday (had it for about a month!) and set it up.. This morning the power supply is dead.. I have looked for a new one online (In the UK using Maplin let me know if you know a better place.) becasue it would probbaly take too long to get one sent from China or the US and I need to get that station

A customer of mine has 3 TDM400P cards in a box running asterisk. On each card he has four FXO modules. I have set up the dialplan to dial via group 1 for an outgoing call. Channels 1-12 are in group 1. If he plugs a telephone cable into socket 2 or 3 etc, but not 1, when he dials out, it still tries to make the call via socket 1. Straight away the console says that it has dialed the

hi flac list! I'm not sure if this question can be asked here, but here you go (it's a question for audiophiles only): I encode CDDA tracks to FLAC and play them on my Pocket PC (PDA). I'm looking for a high quality headphone to connect to my Pocket PC, but it must be an in-ear one but not like these: http://s7d1.scene7.com/is/image/vanns/770045336?$medium_item$ So no plastic things

Sauda??es. Como que se faz um conector RJ45 em uma ponta e RJ11 e outra. Pretendo conectar a linha de um ATA em uma placa Khomp KFXO IP. A ponta que tem o conector RJ45 est? crimpada com a sequencia 568B e vai ser conectada na placa Khomp, mas a ponta RJ11 eu n?o sei como deve ficar. Li alguns manuais na internet mas n?o entendi ao certo como tem que ser feito. -- Att.* *** Luis H. Forchesatto

Dear all, I am happy to tell you that I received a Digium's TDM20B card for my Asterisk box today. but the phone jack is RJ45 instead of RJ11. So Please I need precise instructions to connect a phone to this card. please, assume that I have a phone (a normal analouge phone connected to the one end of a cable with an RJ11 jack (at the phone side). and now I want to connect the other end to the

Ahhh this could be my problem! I just checked which wires on the RJ11 cable had a voltage across them and it was the yellow and green (3 & 4?). From what someone posted the other day it's supposed to be Bumble Bee and Christmas Tree. I did have to get a technician out to fix my line when it was first installed because it was dead. Maybe he wired it up incorrectly or maybe they just do it

Anyone know of any equipment that I can use to connect a laptop running asterisk to a POTS line (RJ11) ? Regards, Dovid __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com

Hey all, after hooking up some Plantronics to some Snom's (3 320's 1 360), I noticed my client is having some form of feed back on the phone. Because of Snom's "inner oddities" this is how I got it to work. Plantronic --> RJ11 --> SnomHandset Port (on Snom Base) Handset --> Plantronic jack (bottom base in the front) If I placed Plantronic(RJ11) --> Snom's

Does anyone have an (overhead) paging system that they like that works with SIP? We've got a client with an old paging system that (supposedly) just takes an rj11 POTS connection, but when we put an SPA Cisco adapter on it, it doesn't auto-answer the call, so paging never happens. [cid:image001.png at 01D4DFF6.9C1F1AA0] Michael J. Munger, dCAP, MCPS, MCNPS, MBSS Microsoft Certified

The long waited Ultimate GSM Gateway is finally out. This time we have managed to source a new patch of brand NEW GSM Gateway at prices that is only 50% of what the market rate. And with the SMS Function and many more... For purchase please email gsm AT cyper-telecom.net. We accept paypal and bank transfer. Postage is not included. Please notice we have also got the standard Dual Band GSM

Hi All; I am facing a problem that always the users confused and connect the telephone line coming from the telephone service provider to the FXS port and cause it to be damaged, specially if the card was 2 fxs and 2 fxo, so they make mistake and connect the line to fxs while it should be connected to fxo. What is the solution for this disaster? Regards Bilal

Thanks for the suggestion. I have busydetect=yes in zapata.conf. You refer to "Martin's algorithm". Can you provide more details please? ----- Original Message ----- From: "Soner Tari" <list@kulustur.org> Subject: Re: [Asterisk-Users] FXO module in TDM400P (UK, BT) - Hangup detection failing To: "Asterisk Users Mailing List - Non-Commercial Discussion"