similar to: PE-2850 to AX100 via Qlogic Card (QLA200 HBA) on CentOS 4.1

Hi. I'm looking at a qlogic qle2462 hba for my dl360 g5. The thread http://www.mail-archive.com/freebsd-stable@freebsd.org/msg99497.html mentions a deadlock when system is loaded. Has this issue been resolved? Are there other PCI Express hba's which are known to work with freebsd stable and dl360 g5? -- regards Claus When lenity and cruelty play for a kingdom, the gentler gamester is

Hi, I got few servers (IBM HS20,HS21 blades, IBM xSeries 3650 & others) connected to a dual fabric san throught Qlogic HBA's (23xx, 24xx). Multipathing is done with device-mapper-multipath. On CentOS 4.x i can scan for new scsi devices without any problems, get them up with multipathing & use them without any problems. However, after i started installing CentOS 5.1 (did not

Hi I recently installed some hba's into a bunch of these 585's as they are forming a RAC cluster - previously to this they were all using DAS without issue. After the qlogic cards were installed i reinstalled the OS and now once installed the OS will not boot - the box just reboots continuously, it does not even appear to get to grud, although this could be the ilo not displaying

Skipped content of type multipart/alternative

Skipped content of type multipart/mixed-------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 189 bytes Desc: not available Url : http://lists.freebsd.org/pipermail/freebsd-stable/attachments/20060322/b3ddf5ba/attachment-0001.pgp

Hi, I am trying to use menu.c32 with RHEL 4.2. Everything seems to work fine until menu.c32 loads. Just half a second before the menu draws I see a set of error messages like so: Unknown keyword in config file. Unknown keyword in config file. Missing parameter in config file. Unknown keyword in config file. Unknown keyword in config file. Unknown keyword in config file. The

Hello Everyone, Whenever purchasing hardware we make it an effort to validate OS, driver and now hypervisor compatibility. Being a low budget company, we really look for the best bang for the bug. Right now that happens to be: x3755 M3 brandishing the AMD SR5690 chipset. We plan on installing a QLogic fiberchannel and a graphics card that support PCI passthrough. Before doing anything we are

Very strange behavior, been banging my head against the wall on this one too. It works fine on CentOS 4.6, the behavior is when the driver loads the bus is not scanned or at least the devices that are exported are not detected. (they are detected in the HBA bios no problem). If I issue the qlogic bus scan command it doesn't get anything back either. If I manually add the devices with

arrrgh, I'm trying to install the QLogic Linux Super Installer on a CentOS 6.4 server that has a QL2532, and getting... # ./qlinstall -i #*********************************************************# # HBA/CNAs Driver Installer for Linux # # Installer Version: 2.2 # #*********************************************************# Kernel

Hi there, I've installed a Qlogic HBA in a 4.8-STABLE machine and I'm able to present LUNs to this machine from an HDS array and use them. That all works perfectly. However, the only time I pick up new LUNs is on a reboot. Seems like I should be able to rescan the fabric and pick up new LUNs, but there doesn't seem to be a way to do this. I tried camcontrol rescan, but that

Hello, Any one know how to enable Fiber Channel QLOGIC driver for xen kernel? This driver is available in CentOS4.3 as default. But when i compile xen-3.0.2-2 with linux-2.6.16 or xen-3.0.1with linux-2.6.12, the driver is not there. I tried to turn on QLOGIC by using "make menuconfig" and modified .config file but there is no change in /lib/modules/2.6.x-xen/kernel/drivers/scsi after

Hi, Before I describe the problem, I'll describe my environment. This is a development environment built over 1.5 yrs ago: * We have a 2 node Oracle RAC Cluster. * built on two Dell PowerEdge 1850 Servers (Intel(R) Xeon(TM) CPU 3.20GHz) * OS is RHEL3 U3 * Kernel 2.4.21-20.ELsmp * these 2 servers are attached to an EMC AX100 SAN via fibre channel * HBA (QLogic QLA6312 PCI to Fibre

I'm told that we cannot do Multipath I/O on our iSCSI SAN on RHEL with 2 network cards. I could use 1 network card, but need an HBA. Is this true? Do I need an HBA, or can I do Multipath using 2 NICs? We're running RHEL 4 and CentOS 4 and 5 servers on this network. I have been reading through the device-mapper documentation, but I have not found anything (unless I'm not clear on

Does OpenSolaris/Solaris11 Express have a driver for it already? Anyone used one already? -Kyle

Hello, I have been looking around all day and lot''s of things are being thrown at me such as npiv and vscsi and such. I have an HITACHI,DF600F SAN which goes via two switch fabrics and plugs in to the dual port Qlogic HBA on the server(s). I have 4 Dell 2950''s at current which are under-utilised. I want to buy new 2xR710 and consolidate these 4 servers to a single physical

Hi, We know that the Command Line Interfaces (CLIs) for configuring and managing Emulex and QLogic Fibre Channel HBAs are included in the XenServer Host. Now suppose I want to configure and manage these HBAs out-of-band, say from some other virtualized or non-virtualized host. Is it possible ? If yes, then how? Thanks and regards Ashit _______________________________________________ Xen-users

On 06/20/2013 11:07 AM, Dennis Chen wrote: > Hi, > > When I want to use NPIV for a FC HBA in my Linux machine, I got the below > error msg in virsh: > > virsh # nodedev-create /home/kvm/vHBA.xml > error: Failed to create node device from /home/kvm/vHBA.xml > error: internal error Parent device scsi_host20 is not capable of vport > operations > > I checked the

Does anyone have any good or bad driver/performance/stability experiences with either: LSI Logic LSIU320 Adaptec 29320ALP-R or (or other current boards using the same driver) in Opteron servers running RHEL 4 or CentOS 4, x86_64? Thanks in advance. -- Inside every older person is a younger person wondering what happened

Hi Everyone I am looking at setting up a File Server that uses ISCSI storage. It is the first time I have done this, so I am wanting to get peoples thoughts on whether for CentOS systems you should use Hardware based ISCSI HBA's? If so do I need to be careful about what HBA I use ? Currently I am looking at purchasing a Dell System using Broadcom ethernet cards/ ISCSI HBA. From

Hi, I have a host which is connected to SAN via single Fibre channel HBA (qlogic). I have several LUNS assigned to this (sdc, sdd). I added another single port HBA to this host. I can now see two world wide names. Now the confusion is which world wide name does sdc and sdd is/was using. scsi_id -g -u -s /block/sdc only gives wwid but I need the wwn for sdc and sdd. Thanks Paras.