similar to: Processor

Hello, I'm doing bootstrap in R 2.4.1 in order to compute standard errors of an estimator. I'm running the same program on 4 computers. The core of the program is a nlm minimization of a function, which is (I believe) nicely coded using (t)apply and all the vectorized stuff. I'm slightly puzzled by the differences in the speed of computation. The program works twice as fast on a

I have been using a laptop computer of Pentium III 1.13 Ghz. I heard that AMD's Athlon has excellent floating point capacity. So I bought a Athlon 2200+ laptop yesterday. I expected that new Athlon 2200+ will be twice as fast as the P III 1.13 GB. I ran a R simulation program and the new computer is only 30% faster, in fact slightly slower than a Celeron 1.50 GB laptop. I am very disappointed

Hello, I''ve setuped an ethernet bridge on a debian sarge 3.1 with l7-filter + ipp2 shapper rules The server is a supermicro p4sci + celeron pentium 4 base 3ghz + 512Mb + 2 ethernet e1000 One interface is connected to a cisco catalyst switch The other interface is connected directly to a CMTS (a sort of router for cable modem) configured as bridge too. More than 20Mbps of bandwith

Greetings, We recently obtained a new computer in our lab with a Pentium 4 3.86 GHz processor and 4 gb of ram running windows xp with service pack 2. After installing R on this machine, I ran a bit of code and found that the execution time was actually significantly slower than a machine running windows xp with an older Pentium chip 1.73 GHz and 1 gb of ram. After speaking with the

I have a 3.2 GHz P4 Win XP Pro connected to a Fedora Core 4 server running on a 2 GHz Celeron. I get about 350 MB/s FTP transfer over a Gigabit Ethernet connection. Samba is very much slower between the same computers. Can Samba be sped up to where it approaches the FTP performance? -- Chuck Forsberg caf@omen.com www.omen.com 503-614-0430 Developer of Industrial ZMODEM(Tm) for Embedded

Jay, I have had a lot of trouble with the FXO ports on Adtran TA750. Unless the incoming POTS lines have a balance impedance, they will buzz very bad. Gregory P. Scasny Golden Technologies Inc. http://www.golden-tech.com 219-462-7200 -----Original Message----- From: asterisk-users-admin@lists.digium.com [mailto:asterisk-users-admin@lists.digium.com] On Behalf Of Jay Milk Sent: Sunday, April

Alrighty. I'm having a hell of a time and I need help. I'll try to give as much information as possible. ---------- HARDWARE ---------- MB: Supermicro PDSBM-LN2+ Intel 946GZ ICH7R + Intel? 82573 Memory: Crucial 512Mb, 1Gb, 2Gb modules matched to above MB. Processors: Intel Celeron 420 Conroe-L, 1.6GHz 512KB 64-bit Intel Core 2 Duo E6320, 1.86Ghz 4Mb 64-bit Intel Pentium E2140

From: Tony Wicks <tonyw at tonyw.com> > I run Centos on Compaq dl380g1/2/3's and Dell servers. While the > Compaqs are strong hardware they are old and frankly the performance > compared to modern (cheap or otherwise) hardware is not really that > impressive. A dual 1 gig P3 dl380 and ultra 3 scsi drives get significantly > out performed by a generic celeron with software

Hola estimados miembros de la lista, Tengo una inquietud. Les cuento: tengo un conjunto de datos en un data.frame. Algunas de las variables que están en él son del tipo factor. Estos factores, naturalmente, tiene categorías: a veces demasiadas categorías y muchas de ellas con 1 individuo contemplando el data.frame más de 1 millón de individuos. Estas pequeñas cantidades creo que me están

> This test seems PARTICULARLY noisy for some reason. Take a look at this: > [...] > ... the native version swings from 3.13-3.34s and the llc-ls version > swings from 3.83-4.0s. The C backend is also noisy, swinging from > 3.98-4.58s. FWIW, these tests are on a Intel P4 Xeon 3.06Ghz machine with > HT enabled. In any case, it appears that we're slower than GCC on this one.

Hi, I have installed and played WC3 on Linux quite a lot around 20031212 release. The game played almost perfectly and I was very happy about that. I have reinstalled it recently. I am currently running it under Wine 0.9 on FC4. I find the performance to be inferior to what it used to be. I am experiencing frequent short pauses ingame. It seems to be related to units and building selections,

Hi Phil Here it is: [root at totorbex ~]# lspci -nn .00:00.0 Host bridge [0600]: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series SoC Transaction Register [8086:2280] (rev 21) 00:02.0 VGA compatible controller [0300]: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Integrated Graphics Controller [8086:22b1] (rev 21) 00:10.0 SD Host controller

Hi All, Fairly new to Debian and Xen but I have a box running with lots of DomUs under Xen2 and it is fine. I have setup a new IBM eServer P4 and loaded Etch and loaded Xen3. It runs up my first DomU beautifully but when I start my second DomU it crashes the PC and reboots. If I comment out the line in /etc/xen/xend-config.sxp (network-script network-bridge) It will run 2 DomUs Have I run

Hello! I'm new to asterisk and linux, so please don't blame me if I write silly things :-) I'd like to setup a system with IVR only. I'll use a SIP gateway to receive calls from the outside world, and I'll install asterisk on a dedicated linux server placed in another location that will be permanently connected to the gateway through the internet. I expect to have 8

Hi, I'm a linux newbie here.. just downloaded the Wine pacakge for Ubuntu and I'm surprised at the number of Windows apps that are functional under Wine. However, the performace is a bit lacking, especially in games though still acceptable. (I'm getting maybe 75% the framerate I'm used to.) I've noticed that the version of Wine I'm using for Ubuntu is specifically

Greetings, Can anyone relate experience(s) installing CentOS on Compaq rack mount servers units please? Easy no problem, easy some issues, or ghastly do not do it under any circumstances... ;) Basically, I'm looking at some used/refurb dual PIII units and will run RAID on Compaq built in SCSI or is it easy to pop in some 3ware SATA in them? Let me know in terms of CentOS 3 and/or 4 please.

want to get from SIP to ISDN or from SIP to SIP. I only have a ADSL connection that means 786kb/s downstream and 128kb/s upstream so i can max handle 2 sip calls at once. I want to have 25 Accounts because of the different numbers for the different phones. Good, i wanted to buy a ready built pc from ebay but now i think i will built a 19" rack case so i will built in a 1 - 1,5ghz intel

Hi, I have a 1 port T1 card in an asus p4p800-vm board with a 2.0g Celeron, and 512m of 266mhz ram (256 on each channel). This board has video, Ethernet, and serial ata all on-board, I got it because of that, there wouldn't be anything else on the pci bus that would mess with the zaptel card(s). So, here's my problem. I'm running redhat 9 with kernel 2.4.20-20.9. I can load the

Can someone give me an idea of the processor power I will need for 1 x TDM240 with 2xquad FXO's and 8 sip phones/ATA's on a quite 100Mbit LAN. The machine we have available of hand is a P4 1GHz with 768MB RAM. Tx Marnus van Niekerk -- "Opportunity is missed by most people because it is dressed in overalls and looks like work." Thomas Alva Edison - Inventor of 1093

Hi all, i'm going to install asterisk with a 4 BRI (HFC chipset) on a Celeron at 2.6 GHz I don't known Celeron performance, but i listen that is not very good. Could I have some performance isuue with this kind of processor ? Thanks for all Giordano -------------- next part -------------- An HTML attachment was scrubbed... URL: